How To Change Sporket set Of cd 70 Urdu 2017

Поділитися
Вставка
  • Опубліковано 12 вер 2024
  • in this video u have to know about sporket changing in urdu easy way
    Even a beautifully maintained chain that spends its life in a shimmering coating of oil and is frequently adjusted to exact manufacturer tolerances will wear out, and it will take the sprockets with it.
    The chain stretches with miles, its rollers fit less snugly inside the sprocket’s teeth and cut into them, eventually turning each tooth into a pointed hook.
    You’ll know a chain needs replacing when it requires more frequent lubrication and adjustment, or you notice stuck links, which are known as tight spots. If you feel a lack of smoothness when changing gear, check your chain for wear and tight spots.You should always replace the sprockets at the same time as the chain. Running a new chain on worn sprockets will cause rapid wear, leaving you needing to replace the chain again in very short order, so it’s a false economy to replace just the chain.
    Before you embark on this job, make sure you are familiar with the technique for breaking and re-fitting a chain’s rivet link, and have the tool to do the job.
    You will also need sockets big enough to undo the front and rear sprocket nuts, which are often bigger than those in standard socket sets. Also, order a replacement tab washer to add security to the front sprocket nut.When replacing your chain and sprockets, consider altering your bike’s gearing. Fitting a front sprocket that’s one tooth smaller or larger will give you more or less acceleration respectively, at either the cost or gain of some top-end speed.Fitting a larger back sprocket will give more acceleration, while a smaller one will reduce it. This is a finer adjustment than the front sprocket, with a difference of three teeth in either direction having the same effect as changing by one tooth at the front sprocket.
    You'll need a new chain and sprockets (obviously), chain splitter and a link riveting tool.
    1. Make sure you have a clear working space. The first thing to do is place the bike on its centrestand, or a paddock stand, so you can remove the rear wheel when it comes to replacing the rear sprocket.
    2. Check if the gear lever needs to be removed before the sprocket cover is removed. Note the position of the splined boss that bolts to the shaft before you remove it. Now remove the the front sprocket cover.
    3. Front sprockets are secured with a big nut which can be self-locking, or it may have a tabbed locking washer. Tap back the tabs with a flat screwdriver or punch and hammer. Have a new washer ready for later.
    4. You need to prevent the force being applied through the sprocket nut turning the back wheel. Wrap a piece of hard wood in soft cloth and insert it through the back wheel (take care not to trap the valve).
    5. When removing the front sprocket nut, use a breaker bar. When you have the nut undone make a note of which way it is fitted, sometimes there is a shoulder on one side. Leave the front sprocket on for now.
    6. Remove the rear wheel and lay it flat on the floor with the sprocket facing up. Undo the sprocket nuts and remove. Compare the old and new sprockets for fitment and size. Now fit the new sprocket.
    7. Compare old and new front sprockets for fit/size. With the wheel still out, which will make it easier to manipulate the sprocket as there’s no chain tension, fit the sprocket and wrap the old chain around it.
    8. Loosen the chain adjusters a couple of turns. This will help when refitting the wheel because the new sprockets will tighten the old chain. Refit wheel with the old chain on, don’t tighten the spindle nut yet.
    9. Split the chain, using a splitter tool. Loosely join the two chains together. Pull the old chain from the front sprocket until the new one is around both sprockets. Join the new chain with the riveting tool.
    10. Fit the tab washer and front sprocket nut, re-insert the wood into the wheel and tighten the nut to the correct torque setting. Tap the tab on the washer over the nut. Now tension the chain and tighten the spindle.

КОМЕНТАРІ • 66

  • @faheemmuhammad3337
    @faheemmuhammad3337 6 років тому +1

    Thanks Qureshi sabah Best video for learning again Thanks

  • @ashfaqkhan2259
    @ashfaqkhan2259 5 років тому

    Mashallah buhat achcha samjate ho AP bahi khus o Abad raho

  • @alisajjad7164
    @alisajjad7164 5 місяців тому

    420H-104L,38/15T vs 420H-104L,41/14T sprocket main kia fark hai aur honda cd70 k liye acha kounsa hai

  • @insaafkhan7178
    @insaafkhan7178 Рік тому

    Thanks Qureshi sir great 👍👍👍.

  • @usmanbabar8980
    @usmanbabar8980 5 років тому

    well done Qureshi autos

  • @nadeemsheraz1103
    @nadeemsheraz1103 6 років тому +1

    Slaam junab mohtram cd70 ke back wheel ko chenge ker ke 125 ka lgaa dain to is se bicke ke speed main fark to nahi paree ga

  • @v3nomyt491
    @v3nomyt491 6 років тому

    Yerbhai. Agli garari choti wale kaisay lagaai gi matlab change kaisay ho gi 14 say 15 fiting kaisay ho gi is per aik vedio bana day argent plzzz

  • @aghawaqas1010
    @aghawaqas1010 5 років тому

    Bhai ye chain set yamaha yb mein laga sakty hai

  • @chdanish5280
    @chdanish5280 6 років тому +2

    Bhai menw wheeler bile bnana he kese bnao

  • @ImranMalik-jl1eo
    @ImranMalik-jl1eo 5 років тому

    BAHI JANN UNITED RIKSHAW KI GARARI SET CHANGE KA TARIKA B BATAY WO KASAY KARTAY HY VIDEO BANAY THANKS BAHI

  • @AbdulAhad-hk9mi
    @AbdulAhad-hk9mi 7 років тому +1

    bhai new chain ko oil se lube up krne ki zaroort to nahi?

    • @qureshiautosofficial
      @qureshiautosofficial  7 років тому +1

      Abdul Ahad
      jnb new chain already lube up hota hy 15 dun bd chain ko lube up krna cheay

  • @ubaidullahkhan9288
    @ubaidullahkhan9288 7 років тому

    which sporket is best kapani

  • @shahidkhan-uu3wz
    @shahidkhan-uu3wz 6 років тому

    Cd 70 chain spocket ka size ek hi hota he ya market me bada chota bhi milta he.. agar ha to geniun spocket chain size kia he?

    • @hobbyelectronics3448
      @hobbyelectronics3448 Рік тому

      C.d 70 ka chain sprocket set oor hai china 70 ka chain sprocket set oor hai fark hai dono main

  • @ayazkhalid8674
    @ayazkhalid8674 3 роки тому

    Meri bike c d 70 4th gear k baad bhi gear mangti hai is ka kia solotion hai

  • @MuhammadShahzad-ne5tc
    @MuhammadShahzad-ne5tc 6 років тому

    Chain garari kis brand ki achi Hai CD70, CG125 aur CD100/RP110: DID Thailand, CK Malaysia, CRLF yah phir konsi ?

  • @imtiazkhan2800
    @imtiazkhan2800 5 років тому

    well done very good job

  • @goofyvids2978
    @goofyvids2978 6 років тому

    Qureshi Bhai
    Spock's lagane ki video bhi bana de..

  • @harooniqbal9540
    @harooniqbal9540 7 років тому +1

    bro SB sy achy wali garari set knsa h did walo Ka ya Honda walo Ka did ko price kitni h or Honda walo ki kitni kuch bata dyjhye

    • @qureshiautosofficial
      @qureshiautosofficial  7 років тому

      whtsapp daily Video's
      did original is best

    • @harooniqbal9540
      @harooniqbal9540 7 років тому

      Qureshi Autos 03419451786 original kesy pta chlta h or kitny ko h

  • @abdulraufsarwar7325
    @abdulraufsarwar7325 5 років тому

    Bhai mai ti bike ky chain garari set ny ak da chain tu rha tha lykin chain teek kar wany ky bat wo a waz kar rah hai mai ny macahnic sy puch tu wo bol rha hai chain garari kaarab hai

  • @anssbinshafiqsama4087
    @anssbinshafiqsama4087 7 років тому +1

    Bhai yr MERI bike start nae horahi mainy CDI coil bhi change Ki Kia masla hosakta hai Thora guide krdyngy

    • @qureshiautosofficial
      @qureshiautosofficial  7 років тому

      sab say phly ap coil karry ka current check kro phr cdi ko dkho phr ignition coil ko

  • @umersiddiqui4803
    @umersiddiqui4803 6 років тому

    Unique model 2011 k lye konse number ka chain sprocket ka set acha rhe gaw..38/15.??

    • @ZeeshanAli-to6rx
      @ZeeshanAli-to6rx 2 роки тому +1

      Original se to Kuch betar hai magar 36 15 zayada achi speed deta hai

  • @shahidkhan-uu3wz
    @shahidkhan-uu3wz 6 років тому

    Bhai chain slider Kase change Kare Jo chimte me laga hota he chain cover k bichme

  • @officialteamgacel346
    @officialteamgacel346 6 років тому +1

    aw aw

  • @muhammadfurqan5330
    @muhammadfurqan5330 4 роки тому

    Chain apne bohat tight rakhi hai halki si lose kreen

  • @muhammadulhaq3034
    @muhammadulhaq3034 3 роки тому

    Is mechanic ny chain zda tight kea ha.

  • @saifrehman6773
    @saifrehman6773 7 років тому

    Bhai ye batao front spoket ko 14 se 15 pe change krne se engine damage to ni hoga kia ?

  • @mrasiftv9998
    @mrasiftv9998 5 років тому

    Assalam e alikum brother

  • @muhammadfurqan5330
    @muhammadfurqan5330 4 роки тому

    Dec 15 2019 rate is 1500 DID

  • @Idealogytech
    @Idealogytech 6 років тому

    Brother mery Pas United 70 hy or woh gears buht choty choty lyti hy
    Means. Gear buht jaldi mangti hy.
    Koi asi tick btao k lamby lamby gear ly.

    • @chaos2363
      @chaos2363 5 років тому

      bro 36 or 15 ka set rakho bike k gher boht lambe ho jaynge mene bh yehi rakha h meri bike achi chlti h

    • @afaqmalik0766
      @afaqmalik0766 4 роки тому

      Same problem

  • @muzammilmushtaq787
    @muzammilmushtaq787 7 років тому +1

    Bhai chain grarai set ki price kya hai

  • @onlyimran1984
    @onlyimran1984 5 років тому

    Bhai Sab say acha kaun sa hay chain sprokit DID ka yah aur bhee koi hay

    • @hobbyelectronics3448
      @hobbyelectronics3448 Рік тому

      Crown lifan company bhi achi hai genuine kay baad wo sab say achi company hai

  • @faheembaig4412
    @faheembaig4412 6 років тому

    Acha

  • @nomanali3450
    @nomanali3450 6 років тому

    CD 70 mian 125 ka ispakit Kasey lagai

  • @MotorbikeMechanic
    @MotorbikeMechanic 6 років тому

    gooodddddddddd videoooooooooooooooooooo

  • @falaksonu6329
    @falaksonu6329 6 років тому

    Bhai Wheeling Kay liye kon sa sprocket lagaun

    • @qureshiautosofficial
      @qureshiautosofficial  6 років тому

      weeling ka sporket say kia contact hay

    • @falaksonu6329
      @falaksonu6329 6 років тому

      Qureshi Autos 03419451786
      Bhai matlat Wheeling Karne Kay liye sprocket 38 15 ya 41 16 ya 35 14 ka lagaun

  • @muhammadabid6983
    @muhammadabid6983 7 років тому +1

    ustad ji
    agli garari choti lgane se kia hta he

    • @MotorbikeMechanic
      @MotorbikeMechanic 6 років тому

      speed barh jati hy

    • @MuhammadShahzad-ne5tc
      @MuhammadShahzad-ne5tc 6 років тому

      Agli garari chooti lagane say speed Kam hoti Hai par power barh jati Hai. Agar beechli garari chooti hogi toh speed barrh jati Hai magar power Kam ho jati Hai.

    • @MotorbikeMechanic
      @MotorbikeMechanic 6 років тому

      Sir apko speed bharani hy kia?

    • @MuhammadShahzad-ne5tc
      @MuhammadShahzad-ne5tc 6 років тому

      Motorbike Mechanic Speed barhane Kay liye aagay wali garari bari lagani chahiye aur peechay wali chooti garari.
      Mesaal Kay taur par 70 ki original garari 14 aagay aur peechay wali 41 hoti Hai toh agar aagay ap 15 yah 16 laga lo aur peechay 38 yah 35 laga lo toh speed barrh increase ho gi lekin engine ki load uthanay ki taaqat Kam ho gi.

    • @MotorbikeMechanic
      @MotorbikeMechanic 6 років тому

      Sir ap bilkul thek ke rahyen hy ap yae bhe kar sktay hen agay ki garari 14 ki lgy rehny dyn or peche ki 38 ya
      39 laga lyen tw behtar rhye ga speed bhe barh jyege or load bhe nh barhyga

  • @shahidabbas4729
    @shahidabbas4729 7 років тому

    Bhi Jan koi paridor Ki video nana kar up lod kar dy