Changing A Hunter PGP-ADJ Nozzle
Вставка
- Опубліковано 6 вер 2024
- Shop now: www.sprinklerw...
Sprinkler Warehouse Product Specialist Dwayne Pro walks you step by step through the process of changing the nozzle on a Hunter PGP-ADJ Rotors available at www.sprinklerw...
🌿 Sprinkler Warehouse: Your One-Stop Shop for Irrigation & Landscaping Needs 💦
bit.ly/sw-home...
📧 Get Great Deals! Sign Up Today!
bit.ly/sw-mark...
We offer a hefty selection of professional-grade products for both contractors and DIY enthusiasts, from smart solutions for efficient water management to sprinkler system accessories to the repair tools to keep everything running smoothly.
_____________________________________________
Shop All Categories:
Shop Controllers → bit.ly/sw-cont...
Shop Drip Kits → bit.ly/sw-drip...
Shop Rotors → bit.ly/sw-rotors-
Shop Spray Heads → bit.ly/sw-spra...
Shop Valves → bit.ly/inline-...
Shop Blu-Lock → bit.ly/sw-blu-...
Shop Nozzles → bit.ly/sw-nozzles
Shop PVC Fittings → bit.ly/sw-pvc-...
UA-cam comments are not monitored. Please direct your questions to the customer service representatives on www.sprinklerwarehouse.com. Warehouse hours are 8am-5pm Monday through Friday.
#sprinklerwarehouse
#irrigation
#sprinklersystem
You are my hero! I loosened the screw too much and the nozzle shot out. Luckily, I found it and because of your video, I learned how to install it. Thank you!
Hahah!!! Same EXACT thing happened to me today…and this video also helped me figure out what to do!!! Thank u!!!
You were helpful to me so I will return the favor. The sprinkler head can also be held in place with a metal band clamp tightened with an electric screwdriver fixed with a appropriately sized socket for speed. Some of us dont have access to a dealer who sells all the accessories. Thanks, Glenn
It's 2020 - Amazon has everything you need.
@@bluestar9463 Thanks for the remimder.
You can order spelling books too....
@@bluestar9463 This has turned toxic. I'm through with you.
Hot tip: if your rotors have an ON/OFF valve. Switch the rotor valve to the OFF position, loosen screw clear of nozzle, and turn the valve back ON momentarily -- the nozzle usually pops/flies out 1-3 feet due to the water pressure, then immediately turn the valve back off. Install new nozzle, tighten screw, and then turn rotor valve back to the ON position. You can avoid damaging nozzles this way since no pliers are required.
The only rotor I know That has this feature is the I-20
Pre-installation I just hold the sprinkler head in place with my hand. If the sprinkler is already installed I use a pair of locking pliers with a cloth to protect the shaft.
Guess where I get all my sprinkler parts all from sprinkler Warehouse my favorite sprinkler supply store
Great video, straight to the point , thanks
Protip- Use the "L" portion of a small allen wrench to remove the nozzle it will avoid deforming the plastic with pliers or screwdriver.
Who can tell me where to get the different port size nozzles, what the advantages of changing them are, and if there are low water pressure issues, can a best size port give a more thorough coverage. Just showing how to change it doesn’t teach me what I need to accomplish, which is better coverage with lower pressure or low gph flow.
I gotta buy a better needle nose cause i mangle all my nozzles when using my flathead
Great video thank you
Glad you enjoyed it
Can I just change out the nozzle part to existing sprinkler heads. There's most rainbird out there now. Or do I have to change out all the heads? Thanks
how do you replace the screw if it accidentally came all the way out?
Okay, Dwayne, solve a mystery. What are the two nubs on the one finger ring used for on the Hunter sprinkler tool? The one ring is just round; the other has two square nubs spaced about 1/2 inch apart. They must have a purpose. Driving me crazy.
Hello, I can completely understand. Per Hunter, the ring that has two squares is simply to grip. The HUNTER ADJUSTMENT WRENCH consists of a 3/32 Allen key, two convenient finger loops for gripping, and an opposite side arc adjustment key for all your Hunter rotor adjustments, including the radius.
www.hunterindustries.com/support/residential-rotors-obtaining-hunter-adjustment-wrench
Good
My adjustment screw has its head rounded, so I can't move it.
Any hint on remove it?
Seems Archaic
if only it were that ez like youtube. I stripped 3 allen key tools to back out the damn screw. had to add oil before it came out.never was able to get the red nozzle out it got destroyed. this types of videos are BS . try this on a real 10-15 year old PGP not a studio version.
What size screw?
Hello, Below we have provided a link to the screw
www.sprinklerwarehouse.com/hunter-screw-for-pgp-adj-kit-hu05-1203
Closer view of the head would help. I we can't see what you're talking about the video isn't very helpful.