Definitely not just yours. These are beautifully detailed figures but neca sacrificed joints to give a highly accurate figure. You definitely will want to purchase a stand for these guys. I’ve had 5 of them including the sdcc ones and each one was plagued with floppy limbs or stuck necks. That said they are in the top 3 designed aliens neca has done in my opinion. Absolutely stunning to look at.
I got this figure a few days ago and it is very highly detailed. I got it for $26 at Target which was a great deal. I’m thinking about getting the Alien Isolation xenomorph next.
ME TOO! just got mine unfortunately mine is also having leg problems and I am very concerned I do not want it to break and be a waste of money , Any Vidoes that can help me?
That’s how the Alien from the movie Resurrection had always looked like. AVP Aliens took the look of those Alien from Resurrection, but changing the legs.
@@larryweatherspoon2531no, to call the drone it would have to have a completely different build. Just because it has the domed head doesn’t make it to drone
To start, I love your videos. I've grown up watching your channel. In regards to the problem with the leg, try heating it up and removing the pin. then reinsert the pin and make sure both sides are in the holes on either side of the leg. Also, it appears that the right leg on your figure is also a left leg, which only makes it more confusing as to what the problem is. I hope this helps. Keep up the great work!
I have this NECA. The right leg (the left when you look at it from the front) has a weak joint at the knee and causes it to lean over in certain positions, but other than that it's a great figure. It's the first NECA in my collection, and I'm definitely planning on getting more NECA Alien stuff!
To bad about the left leg but the figure looks good. I love the dark to translucent head dome it's a really cool looking design. By the way, wow!!! 3 reviews in one day you're spoiling us.
This one's a must have to me even though I have several ultimate warriors. Neca is better in so many ways than any other company out there. There is absolutely nothing I think any company could do to do a better incarnation of a great monster based on HR Giger's fanfuckingtastic design work. Work he somehow mysteriously pulled out of mankind's deepest, darkest nightmares. Somehow crossing the barrier of something that might have existed during the earth's prehistoric emanation, and something that might exist due to man's lack of foresight in the world of terrifying technology. Great review. Keep up the good work.
Giger didnt have to dig too deep ...he was into hallucinogens. I spent time with him in his apartment in NY . The WHOLE time he was either on LSD or mushrooms.
I actually have the rhino alien and the original alien suit, along with the movie poster version of the predator, you know the one that has the thermal vision appearance like how the predators in all the movies have, I think with some exceptions, when they use their mask to see the heat coming from the humans when their hunting their targets
I have a problem with a neca alien warrior but from Aliens too, some figures come with problems in the legs. They need to check that maybe is the tight package.
@@HR-yd5ib Hairy dryer or some boiled water. For something like this, I would do the boiled water. Just microwave a cup of water, then dip the knee into the water (if it won't fit in the cup, pour it in a bowl, whatever works), just keep it in the water for say, 30 seconds or so. It should make the plastic extremely rubbery, allowing one to squeeze the joint back together or push the pin through, etc. You can then douse the spot in some ice cold water to get the plastic to stiffen back up. Otherwise just leave it alone and it'll cool down and be back to normal.
Just got this figure a few days ago and the left leg was strongly bent to the exterior (I guess there wasn't much communication between the box and figure designers or one of the teams was bunking the weekely Monday meetings). I've tried to straighten it by hand and it snapped without much effort. Luckly, I was able to send it back and got a full refund and purchased another figure (from a different vendor) with exactly the same left leg issue. This time I've placed the left leg in hot water and fixed the issue easily. Same problem as yours with some stiff limbs and the inner jaw. P.S. I think the back tubes are called "bio ports" or so I've heard. Keep up the good work!
The loose knee can be easily fixed. The issue is the knee peg isn’t pushed all the way thru. Heat it up then PUSH that peg right thru. Then squeeze the knee together while it’s still warm. Then pop in the freezer to harden the plastic again 😂
I know the feeling Spot! I had to basically push his toe joints in because mine and both of its toe joints not fully connected it took me an hour with hairdryer to basically force them in and boy my fingers were sore afterwards too. >:C I luv NECA I really do but my god they have alot of QC issues lately! Is it their factory in China or what?!
I ordered the two prior versions of this alien from the DC two packs (the purple one that came with Superman and the Joker Alien). While they're technically not the same release, they still share the same mold, and I have not had that problem with the leg joints on either. It doesn't seem like a universal issue.
I use the tail to support the weight of both my xenos. Of the two ridged head Xenomorphs, which one do you prefer, aliens or avpr? Would would be your favourite xenomorph design be overall (queen not costed)?
I can't choose between this one and the Ultimate blue Neca one. I prefer this sculpt with the dome head, especially since it is somewhat transparent, but does not show the skull, I hate transparent Alien's heads that show skull. But on the other hand I would have prefered a black / blueish tone, I'm not a big fan of that brown, eventhough it is faithfull to the Resurrection version. This one is also cheaper.
@@TheKING1579 Well I ordered the AVP Alien Warrior Serie 7 (black) instead, this is the same sculpt but in black, perfect for me. However there are many fake chinese bootlegs, the seller assured me his wasn't, hope it's true !
i am getting my 1st neca alien ( the classic design with bald aerodynamic head). which version with best built quality that u will recommend? thanks for the amazing & extensive review!!
This figure is the same mold that the NYCC Joker Alien and the Superman vs Alien figures used. In my opinion. The (Resurrection) mold and color that was used for the Alien vs Superman is waaay better than this brown one.
it can be an unpopular opinion...but for me THIS thing looks alot betet than some of the ultimate alien xenomorphs from neca..man...just look at THAT FUCKIN TAIL...great review bro :D
Mine came out of the package with a very bent leg and loose joints on both legs. All my NECA Alien figures have had problems with the legs out of the box. It does look great tho.
I don't know, that warrior sculpt looks absolutely awful to me. Neca is always great with the screen accuracy, but this one looks so off to me. The resurrection aliens always looked like the most streamlined and sleek evolution of the design to me. Not that I think it's the best design, but they always looked sleek and elegant. But this looks clunky af. I hate the way the dome awkwardly ends in a straight seem right above the mouth, when I feel like the smooth gradient from fleshy lips to the aerodynamic hard dome is one of the defining features of this specific alien. And they kinda blow it here. I also don't really like that exaggerated upper lip snarl. The overall dome shape also seems pretty awkward to me, too squarish and bulky. Idunno, this one's a pass from me.
I always had this burning question when I saw Alien Resurrection and AVP, did the producer use the same Alien warrior from Resurrection to AVP? They both look alike.
The reason why the Alien Resurrection alien looked much more different than the typical xenos was because of the splicing in their DNA with Ellen Ripley's, just a hunch. And I'm guessing the reason why they look similar to the ones in AVP was most likely to reduce budget costs for film making if the originals were near impossible to obtain or thought that this design was cooler, which I didn't think so.
@@Bionic8J I'd chuck it up to them probably preferring the more slicker design of the resurrection design as it's more practical. But story wise it could probably be the predators manipulating the xenomorph to better suit the hunt
I got this and less than a day afterwards the 3rd leg section broke off and most of the joints were super stiff and its tongue cant come out because it is obstructed by the teeth
The figure is okay; but the torso isn't really like what the actual Resurrection xenomorph torso is supposed to be like. They just used the AVP alien body. I hate that honestly.
That's disappointing! My original dog alien came crazy loose out of the package and he's so hard to pose. Particularly his head is so loose it just droops down. He looks so good otherwise! Thankfully my other Neca aliens have been fine. Well, mostly...the ultimate Aliens fig has somewhat floppy knees.
That might have been caused by the way it sat in the package I've had some like that and others just fine. I actually just got this figure from my wife.
@@sociallyresponsiblexenomor7608 I thought it came from their genitals?? Do they even have genitals?? Do they have a butthole cos they sure eat a lot when they get the chance!
Definitely not just yours. These are beautifully detailed figures but neca sacrificed joints to give a highly accurate figure.
You definitely will want to purchase a stand for these guys. I’ve had 5 of them including the sdcc ones and each one was plagued with floppy limbs or stuck necks.
That said they are in the top 3 designed aliens neca has done in my opinion. Absolutely stunning to look at.
I agree, I'm a fan of the translucent domed heads over the ridged undomed heads from Aliens.
karma's a bitch and it really doesn't matter
@@howardharvey4961LMAO okay??? Why did you say this???
Yeah I fully agree. The ridged head has never been my thing.
@@TheFirstCurse1 just to be funny
I got this figure a few days ago and it is very highly detailed. I got it for $26 at Target which was a great deal. I’m thinking about getting the Alien Isolation xenomorph next.
ME TOO! just got mine unfortunately mine is also having leg problems and I am very concerned I do not want it to break and be a waste of money , Any Vidoes that can help me?
These neca alien figures are now 40 dollars in target
@@goodxd701 that’s capitalism for ya
They did what I wanted them to do, and just took the AVP warrior and put on the Isolation legs
That’s how the Alien from the movie Resurrection had always looked like. AVP Aliens took the look of those Alien from Resurrection, but changing the legs.
Isn’t that the drone
Not quite the same legs.
@@larryweatherspoon2531no, to call the drone it would have to have a completely different build. Just because it has the domed head doesn’t make it to drone
@@rickstevens8058 so why does warriors and drones have the same heads? I figured drones have those heads because there young or the hive is young
I love this figure the more time I have it the more I'm happy I got it.
I'm going to get this and try to display it like it's swimming.
To start, I love your videos. I've grown up watching your channel.
In regards to the problem with the leg, try heating it up and removing the pin. then reinsert the pin and make sure both sides are in the holes on either side of the leg.
Also, it appears that the right leg on your figure is also a left leg, which only makes it more confusing as to what the problem is.
I hope this helps. Keep up the great work!
You're right, you can ask a replacement request by emailing neca support :)
Good work! 👌👍
I love youre alien reviews
Thank you very much!
I have this NECA. The right leg (the left when you look at it from the front) has a weak joint at the knee and causes it to lean over in certain positions, but other than that it's a great figure. It's the first NECA in my collection, and I'm definitely planning on getting more NECA Alien stuff!
I like this design. The head looks Insect like.
To bad about the left leg but the figure looks good. I love the dark to translucent head dome it's a really cool looking design. By the way, wow!!! 3 reviews in one day you're spoiling us.
Really cool xenomorph figure 😎👍
This one's a must have to me even though I have several ultimate warriors. Neca is better in so many ways than any other company out there. There is absolutely nothing I think any company could do to do a better incarnation of a great monster based on HR Giger's fanfuckingtastic design work. Work he somehow mysteriously pulled out of mankind's deepest, darkest nightmares. Somehow crossing the barrier of something that might have existed during the earth's prehistoric emanation, and something that might exist due to man's lack of foresight in the world of terrifying technology. Great review. Keep up the good work.
Giger didnt design this alien...tom woodruff did.
Giger only did the 1st and 3rd.
He HATED the rest.
Thats a fact.
Giger didnt have to dig too deep ...he was into hallucinogens.
I spent time with him in his apartment in NY .
The WHOLE time he was either on LSD or mushrooms.
RLee Roberts - ricky did not say that Giger created it, he said it was BASED off of Giger’s designs - which it is. THAT’s a fact.
So you have the basics covered and you're just beginning to scrape the surface of who and what H.R.Giger was? 👍
Love this action figure unfortunately 100% of this figure selling in ali, ebay, amazon..are fakes at this time. Thx for the review. amazing job.
I really like this NECA Alien Resurrection Xenomorph Warrior figure. Thanks again Spot. I really appreciate it!
I actually have the rhino alien and the original alien suit, along with the movie poster version of the predator, you know the one that has the thermal vision appearance like how the predators in all the movies have, I think with some exceptions, when they use their mask to see the heat coming from the humans when their hunting their targets
Thank you so much! I have been waiting for this for a long time!
I’m a bit of a sucker for the “Double Knee” look on my monsters
I have a problem with a neca alien warrior but from Aliens too, some figures come with problems in the legs. They need to check that maybe is the tight package.
That joint on the knee just needs to be heated up and squeezed together, letting it cool. That'll fix the gap. The plastic got warped is all.
How do you heat it up and to what degree? Thanks!
@@HR-yd5ib Hairy dryer or some boiled water. For something like this, I would do the boiled water. Just microwave a cup of water, then dip the knee into the water (if it won't fit in the cup, pour it in a bowl, whatever works), just keep it in the water for say, 30 seconds or so. It should make the plastic extremely rubbery, allowing one to squeeze the joint back together or push the pin through, etc. You can then douse the spot in some ice cold water to get the plastic to stiffen back up. Otherwise just leave it alone and it'll cool down and be back to normal.
@@Starfig , many thanks! will try! marry x-mas!
Starfig thanks
Bro how are you posing yours? Mine is so hard to pose.😢😢
How do you fix loose joints?
Just got this figure a few days ago and the left leg was strongly bent to the exterior (I guess there wasn't much communication between the box and figure designers or one of the teams was bunking the weekely Monday meetings). I've tried to straighten it by hand and it snapped without much effort. Luckly, I was able to send it back and got a full refund and purchased another figure (from a different vendor) with exactly the same left leg issue. This time I've placed the left leg in hot water and fixed the issue easily. Same problem as yours with some stiff limbs and the inner jaw. P.S. I think the back tubes are called "bio ports" or so I've heard. Keep up the good work!
The average consumer market should not have to deal with such dicey luck of the draw quality control
Love this figure
Such a solid sculpt
Love it defo gonna cop this
The loose knee can be easily fixed. The issue is the knee peg isn’t pushed all the way thru. Heat it up then PUSH that peg right thru. Then squeeze the knee together while it’s still warm. Then pop in the freezer to harden the plastic again 😂
5:25 - producers? you're filming a toy in your hand...
thanks for watching
HEHE
Same issue left lower knee came loose
I love your reviews of these figures and I loved at the beginning you said don't fall don't fall don't fall lol ❤
NUMBERSIX, EL DIABLO.
SAVAGE HULK AND XENOWARRIOR.
Alien 4 is a great film, by far the best movie of the franchise.
Aliens is the best one
@@seaotter458 GAME OVER MAN!!!😂😂😂 That's a good Alien movie, I like that one aswell😁.......
Still not better than Alien 4.
Mine had a bum leg too, only flaw, so might just get a dynamic stand to help keep it upright
I know the feeling Spot! I had to basically push his toe joints in because mine and both of its toe joints not fully connected it took me an hour with hairdryer to basically force them in and boy my fingers were sore afterwards too. >:C I luv NECA I really do but my god they have alot of QC issues lately! Is it their factory in China or what?!
Good review
You know I would like you to do a pumkin Head figure review haven't seen you do one ever or in awhile
There isnt one except for hot toys but its unavailable nowhere to be find
BETTY, HULK, NUMBERSIX.
I ordered the two prior versions of this alien from the DC two packs (the purple one that came with Superman and the Joker Alien). While they're technically not the same release, they still share the same mold, and I have not had that problem with the leg joints on either. It doesn't seem like a universal issue.
Nice xeno
HULK, BETTY AND XENOWARRIOR.
I use the tail to support the weight of both my xenos. Of the two ridged head Xenomorphs, which one do you prefer, aliens or avpr? Would would be your favourite xenomorph design be overall (queen not costed)?
I can't choose between this one and the Ultimate blue Neca one.
I prefer this sculpt with the dome head, especially since it is somewhat transparent, but does not show the skull, I hate transparent Alien's heads that show skull.
But on the other hand I would have prefered a black / blueish tone, I'm not a big fan of that brown, eventhough it is faithfull to the Resurrection version.
This one is also cheaper.
TheSenSx get this one better
@@TheKING1579 Well I ordered the AVP Alien Warrior Serie 7 (black) instead, this is the same sculpt but in black, perfect for me.
However there are many fake chinese bootlegs, the seller assured me his wasn't, hope it's true !
HULK, XENOWARRIOR.
Thank you for making A Xenomorph video
Where you buy this?
Mine came perfect! Stands very, very well. If I were you, I'd heat up that knee joint, see if the plastic will close up after softened...
2pack
t800 & xeno warrior
i am getting my 1st neca alien ( the classic design with bald aerodynamic head). which version with best built quality that u will recommend? thanks for the amazing & extensive review!!
looks cool.
My left shin was sooo tight it snapped lol iono what to do now. Maybe target will take it back?
2PACKSET WARRIOR, CITYHUNTER
It is very similar to the avp grid alien
MRSIX, THANOS.
Nice vids
Can it crawl on the ground like the dog alien?
Well done. Also made a video about an alien character. The Dog Alien.
@
Can you see his eye sockets?
HULK AND XENOWARRIOR.
Put the leg in hot water, join the joint and then put in cold water.... I fix mine with that
This figure is the same mold that the NYCC Joker Alien and the Superman vs Alien figures used. In my opinion. The (Resurrection) mold and color that was used for the Alien vs Superman is waaay better than this brown one.
it can be an unpopular opinion...but for me THIS thing looks alot betet than some of the ultimate alien xenomorphs from neca..man...just look at THAT FUCKIN TAIL...great review bro :D
You don't always have to check the hight of the figure
sure I do
Mine came out of the package with a very bent leg and loose joints on both legs. All my NECA Alien figures have had problems with the legs out of the box. It does look great tho.
I don't know, that warrior sculpt looks absolutely awful to me. Neca is always great with the screen accuracy, but this one looks so off to me. The resurrection aliens always looked like the most streamlined and sleek evolution of the design to me. Not that I think it's the best design, but they always looked sleek and elegant. But this looks clunky af. I hate the way the dome awkwardly ends in a straight seem right above the mouth, when I feel like the smooth gradient from fleshy lips to the aerodynamic hard dome is one of the defining features of this specific alien. And they kinda blow it here. I also don't really like that exaggerated upper lip snarl. The overall dome shape also seems pretty awkward to me, too squarish and bulky. Idunno, this one's a pass from me.
Not just you bad left leg and legs weak in general i did add clear nail coat over the left knee it did harden alot more
Hey spot the hinge on the knee is petruding out, you going to like line it up and push that peg through the whole
Counted.
I always had this burning question when I saw Alien Resurrection and AVP, did the producer use the same Alien warrior from Resurrection to AVP? They both look alike.
The reason why the Alien Resurrection alien looked much more different than the typical xenos was because of the splicing in their DNA with Ellen Ripley's, just a hunch. And I'm guessing the reason why they look similar to the ones in AVP was most likely to reduce budget costs for film making if the originals were near impossible to obtain or thought that this design was cooler, which I didn't think so.
@@Bionic8J I'd chuck it up to them probably preferring the more slicker design of the resurrection design as it's more practical. But story wise it could probably be the predators manipulating the xenomorph to better suit the hunt
2pack
judge dredd & the warrior
2pack
captain america & xenowarrior
They are brachial tubes.
Its how they breathe.
He gon fall.
MRSIX, EL DIABLO
I had that but my brother broke it now u gotta get a new one :/
I got this and less than a day afterwards the 3rd leg section broke off and most of the joints were super stiff and its tongue cant come out because it is obstructed by the teeth
0:10
Whatever you were smoking... I want some
no idea what that means but ok
No se si soy yo pero me parece que es el mismo molde que el de alien vs predator serie 7
Why physical form Alien Xenomorph Warrior in Alien Resurrection is different with physical form Alien Warrior from Aliens (1986) ?
ALIEN4 RESURRECTION
1997 TOY
Jason x mask please
ALIEN4 1997 TOY.
I just use them to play with them, pose them and model themc
alien vs predator2
1990
The figure is okay; but the torso isn't really like what the actual Resurrection xenomorph torso is supposed to be like. They just used the AVP alien body. I hate that honestly.
SUPERBEAST MRSIX
That could be fixed.
alien4 1997
Ahhhhhh
ALIEN4 RESURRECTION 1997.
That's disappointing! My original dog alien came crazy loose out of the package and he's so hard to pose. Particularly his head is so loose it just droops down. He looks so good otherwise! Thankfully my other Neca aliens have been fine. Well, mostly...the ultimate Aliens fig has somewhat floppy knees.
hmm the mold looks a lot like that of the neca avp alien
It is lol
Heat the knee an clamp it
That might have been caused by the way it sat in the package I've had some like that and others just fine. I actually just got this figure from my wife.
Loose leg on the figure. QC issues sucks.
I seriously can't stand this design...
Rilyn666 why?
Exhaust ports, always thought this is where they secrete the resin to cocoon the prey for the face huggers.🤔
That comes from their mouths actually.
They are brachial tubes..its how they breathe.
@@sociallyresponsiblexenomor7608
I thought it came from their genitals?? Do they even have genitals?? Do they have a butthole cos they sure eat a lot when they get the chance!
2PACKSET XENOWARRIOR, CITYHUNTER