I have 2 IM 50 gallon tanks and I’d buy two of these when they are released instantly. My mother in law has the IM 40 I’ll buy her one for her tank! Thank you so much for all the time you’ve spent on these man.
Guys! I received mine for my INM 10 Gallon Nuvo Fusion SO excited! The quality is just so professional, and I can't wait to set it up when I get to Hawaii. He did a killer job and worked with me so that I can receive it in time before my move.
I love the one you sent me for my waterbox 20. I’ve gone thru a whole roll but only because I was doing a few deep cleans of all the detritus I had built up in the back chambers. I’m expecting the next roll will last 2-3 times as long. I do wish there was a way to add the basket to tanks that have had the filter sock holder removed. Other than that it’s perfect. Thanks again. Keep up the great work.
Yeah, I’ve been including some replacement brackets for people that removed them. Unfortunately, the basket design would have to be drastically different/ bigger and longer to print.
Just ordered one as soon as I saw you made them. Hope to get one soon! :) I'm planning on installing a rotor on it with an apex optic sensor if anyone else wants the idea.
I have an IM tank also and you inspired me to make my own. I feel your pain with the little lip in the overflow making it hard design. I added a small stepper motor and an internal float connected to a wemos d1 mini and its fully automated.
That’s awesome, send me some pictures. Mark@isealive.com. I have a bunch of controller boards and am going to add automation in the future but I wanted to start with just the base structure, no electronics.
Love what your doing for the hobby. I've checked out both your online site and your page on etsy and you only had the black color option for the IM roller mat and for the AI Prime Shade Diffuser/ Fan Guard. I'll probably go that route for one of my tanks, but at some point will there be an option for other colors like you have in the pictures on your site? For the fan guard especially I feel like it actually brings some attention to it, otherwise it just blends in.
Would love a roller mat for aquafuge2 hang on back . I use it as a giant hang on back. Also just ordered your roller mat for the waterbox cube 20 (different tank)
I think it works on the 30 lagoon. You can check the chamber size online with your tank. All the smaller tanks have the same size chamber and I think above 30 is the cutoff.
@@ISeaLive thanks much appreciated, the fluval evo one is just bit to small. The m90 is apparently same size rear chamber to the innovative marine sr80/60. Could you increase the size by few percent to fit the size I would require?
These are manual rollers. So a twist on the roll every 3-7 days depending on feeding? Who is making the disposable (ie: and the cost) mats to be rolled?
Yeah, it depends on your tanks bio load . I’m currently replacing the about half of the dirty roll every 2 days. So I roll it up till half is new. I’m currently the one making the rolls. I hope to start having a fleece company make them for me soon.
Do you sell the STLs for both the basket and cage? I have a Nuvo 20 I’m about to set back up, and would love to print my own/play around with it to see what works best for my needs.
Thank you, I’ve checked out the Red Sea max and it might not be that easy. The filter sock bracket is built into the tank and can’t be removed, correct ?
I have one of the old 20 gallon peninsula tanks, will it work for it? I see in your video that your tank has a weird elevation change in the panel separating the sump from the tank, that is only difference I can see.
You should compare you overflow chamber to the specs of the NUVO Pro 2 online. You can find it on the innovative marine website. The chamber is 2.8”x 2.8”
Hi, congrats for all this development. Done as well but for an automatic version, and slightly bigger (sump version), so I know it is lot of effort! If you're curious to see it: diyaquariumfilters or miaquarium.. I can't put direct link in comment.
I tried to check it out but so much comes up when searching DIYaquariumfilters. I thought you could post links. I wonder if UA-cam changed that recently.
How about a roller mat for the most common purchased 1st aquarium and one I have had for several years now... Biocube 32 :) I will buy 1st if you create one!!!
@@ISeaLive Seems like the smaller sized tanks have shorter back chambers in height but look pretty close in all other chambers. Not 100% on that however. Let me know if you create one for the 32, I would love to test it for you.
I have a ton of tanks to make these for and not a lot of time. It would be hard to make just one design for a custom tank but I am happy to guide if I can help.
Interestingly, I made one for the Nuvo 50 last week but my computer failed a a it wasn't saved. All my work was lost. I'll try and remake it this week. I ligit cried when it was lost.
I have 2 IM 50 gallon tanks and I’d buy two of these when they are released instantly. My mother in law has the IM 40 I’ll buy her one for her tank! Thank you so much for all the time you’ve spent on these man.
It's coming. I'll get the larger one started soon.
I'd love to see one of these for the Red Sea Max Nanos, even if I had to remove the fixed in filter sock holder. Great innovation!
Yes @ISeaLife pleeease do one as well for the Red Sea Max Nanos as well. ❤👍I would get my hands on this instantly for the Max Nano Peninsula!
Guys! I received mine for my INM 10 Gallon Nuvo Fusion SO excited! The quality is just so professional, and I can't wait to set it up when I get to Hawaii. He did a killer job and worked with me so that I can receive it in time before my move.
Thank you, Ory. I hope you enjoy the tank and good luck with you move to Hawaii.
Do whatever you want as far as videos go. I will watch ALL of them. multiple times. I watch a lot of channels. You are by far my favourite.
Thank you, this made my day. I’ll trying to keep getting the videos out but they take a long time to make.
Innovative marine 30 !!
PLEASE do this for the Fiji Cube Drop-in AIO Sump…… for the budget reefers !!! Amazing work, really.
Thank you. The Fiji cube is on the list
Oh, man. That IM roller with a media tray built in would be PERFECT. I would order one today!
I made an update the the media basket so it can working in the second chamber with the water flowing up.
I love the one you sent me for my waterbox 20. I’ve gone thru a whole roll but only because I was doing a few deep cleans of all the detritus I had built up in the back chambers. I’m expecting the next roll will last 2-3 times as long. I do wish there was a way to add the basket to tanks that have had the filter sock holder removed. Other than that it’s perfect. Thanks again. Keep up the great work.
Yeah, I’ve been including some replacement brackets for people that removed them. Unfortunately, the basket design would have to be drastically different/ bigger and longer to print.
Would be interesting to see if you could make one for the coralife biocubes, the 15 and 30 gallon
ISeaLive is an amazing company with great’s custom services
Great work - but you're no kidding about being super busy.
I just got an IM SR-80 Pro. On one side they include a filter sock that I would love to get rid of!!
Love the octopus. Can't wait to see it and possibly have one
You will get a better look at it soon 👍🏻
Just ordered one as well. Thanks for developing these as it will make maintenance a lot easier!
Awesome, thank you Robert. They will go out later this week.
@@ISeaLive Any update on shipping?
@@robertmaze5434 the first batch is going out tomorrow 👍🏻
Just ordered mine two days ago. Very exciting
Awesome, thank you Matt 👍🏻👍🏻👍🏻
Just ordered one as soon as I saw you made them.
Hope to get one soon! :)
I'm planning on installing a rotor on it with an apex optic sensor if anyone else wants the idea.
Thank you. I’ll get it out ASAP
So sweet! I would love to see one of these for the bigger water box aio’s.
I’ll have to hit those up next.
I know, I have a 30 gallon shallow lagoon tank. Btw I tried sending you @isealive a couple emails regarding 3d files.
@@westcoastreefer4052 this works with the 30g lagoon. I’ll check out your email.
@@ISeaLive sorry forgot to mention it is a waterbox tank, will still work? About the email I wasn’t able to send it to you, I tried a few times.
Great Job. I would love to have a copy of the files so that i can print one for my tank. Great video. thanks
No Problem, shoot me an email. Mark@isealive.com
@@ISeaLive email sent, thanks again
nevermind, designed my own model and stl. thanks again. great videos.
@@the_factory- I’ve been behind on emails . I’ll get to it soon. Maybe it will help .
Just ordered. Can’t wait!!
Thank you, your one of the first 5 so I’ll be sending it out this week to get your feedback. 👍🏻
Absolutely!! Will definitely install and tag you.
I have an IM tank also and you inspired me to make my own. I feel your pain with the little lip in the overflow making it hard design. I added a small stepper motor and an internal float connected to a wemos d1 mini and its fully automated.
That’s awesome, send me some pictures. Mark@isealive.com. I have a bunch of controller boards and am going to add automation in the future but I wanted to start with just the base structure, no electronics.
Do they smell at all? When the used filter fleece is exposed to the air sitting there?
I haven’t had any issues and each of the roller mats have a cover.
I definitely hope u make one for the SR80 which fits the SR60 as well I believe. But man I’d buy in a heartbeat for my 80
Those are some beefy tanks. I’ll put them on the list.
awsomeeee definitely need one of thesee im tired of filter socks
Yeah filter socks get super annoying or they just don’t get cleaned
Love what your doing for the hobby. I've checked out both your online site and your page on etsy and you only had the black color option for the IM roller mat and for the AI Prime Shade Diffuser/ Fan Guard. I'll probably go that route for one of my tanks, but at some point will there be an option for other colors like you have in the pictures on your site? For the fan guard especially I feel like it actually brings some attention to it, otherwise it just blends in.
Thank you Mike, I put up a custom color option on the website. Check it out. If you choose the the custom color we can figure it what you want.
Definitely going to be ordering one of these. Can you please also make a media basket for the middle chamber of the IM tanks?
I can but they major issue is that the middle chamber is different on all the IM tanks. I would have to make a different one for each of them.
Awesome! I’ve been waiting for this one. Can I please have a copy of the files?
Shoot me an email. I have not compiled the files yet but I will soon. Mark@isealive.com
Hey do you have one to fit the nuvo fusion 30 long?
Hmmm, I think this might fit the 30 long. What are the specs on the overflow chamber?
@@ISeaLive it's 4 7/8in x 4in opening
Love it! What laser cutter do you have?
It's a 60w OMtech laser
waiting for the IM40 nuvo!
finally got a 3d printer, would love to get the files for this so i can make one for my 25 lagoon
Shoot me an email. Mark@isealive.com
Would love a roller mat for aquafuge2 hang on back . I use it as a giant hang on back. Also just ordered your roller mat for the waterbox cube 20 (different tank)
Awesome, mark and great name 😉
Do you think this would fire the Nuvo 30L? If so I’m buying right now!
I think it works on the 30 lagoon. You can check the chamber size online with your tank. All the smaller tanks have the same size chamber and I think above 30 is the cutoff.
Would be interested if you do make one for the 29g BioCube?
I do have it on my list. Not sure when ill get to it tho.
Would love to buy this for the IM Nuvo 2 40g if its easily scalable to a tank that size!
I am going to be making on for the larger IM tanks soon.
@@ISeaLive can’t wait!
awesome!
Would love a roller mat for FLUVAL M90 aio tank, I’ve got a intank media tray for it but I don’t like it to much
The Fluval M90, I'll have to check it out.
@@ISeaLive thanks much appreciated, the fluval evo one is just bit to small. The m90 is apparently same size rear chamber to the innovative marine sr80/60. Could you increase the size by few percent to fit the size I would require?
Would this fit the innovative marine 15g that they just released by chance? TIA
Yes it does 👍🏻
Dude you should make these for regular size sumps like waterbox sumps
I’m working on a model that will work in most sumps. I’ll have it ready to test in a few weeks.
@@ISeaLive alright! Can’t wait to see it
Do you think this would work for a Fiji cube 40 gallon breeder AIO kit?
With some modifications it will. You are not the first to ask so I should do it.
@@ISeaLive ok waiting for an update!
These are manual rollers. So a twist on the roll every 3-7 days depending on feeding? Who is making the disposable (ie: and the cost) mats to be rolled?
Yeah, it depends on your tanks bio load . I’m currently replacing the about half of the dirty roll every 2 days. So I roll it up till half is new.
I’m currently the one making the rolls. I hope to start having a fleece company make them for me soon.
What’s the width of the fleece roll?
what sort of laser do you use to cut your acrylic? I love watching the process of stuff like this being made. Keep up the awesome work!
I’m using an OM tech 50w CO2 laser 👍🏻
Do you sell the STLs for both the basket and cage? I have a Nuvo 20 I’m about to set back up, and would love to print my own/play around with it to see what works best for my needs.
Shoot me an email, mark@isealive.com
Hey just found your channel.. this is pretty awesome. I would love if you could make one for the Red Sea Max e260.. pleaseeeeeee lol
Thank you, I’ve checked out the Red Sea max and it might not be that easy. The filter sock bracket is built into the tank and can’t be removed, correct ?
@@ISeaLive the Red Sea max e260 doesn’t even have a filter sock. 2 returns . Skimmer and media rack
I would love to test this out for you and reviewing on my channel will be ordering soon
That would be great. I check out some of your videos and just subscribed 👍🏻
Hey, will this work with the Innovative Marine
15 NUVO Fusion AIO Cube Aquarium? Thanks
I'm 99% sure that is will. If it doesn't you can always return it.
Dang are the first 5 already filled? Just got a notification for this video.
I think only 3 have been ordered.
I have one of the old 20 gallon peninsula tanks, will it work for it? I see in your video that your tank has a weird elevation change in the panel separating the sump from the tank, that is only difference I can see.
You should compare you overflow chamber to the specs of the NUVO Pro 2 online. You can find it on the innovative marine website. The chamber is 2.8”x 2.8”
I would love one of the roller mats for my fluval evo sea 13.5 I’m from the U.K.
Check out a few videos ago. I made one for the Fluval EVO 13.5.
How can I buy one please ?
@@sisgroup the link is in the description
Can you make one for a biocube 32
Instead of printing. Get the design nailed down then mold and cast the parts. You can cast several a hour with one mold.
Maybe someday. The basket would be had to cast.
I just bought one. Does buying the roller also include 1 roll?
Thank you Baka. Yes it comes with a full roll 👍🏻
do u make one for a waterbox 60.2 im using the ato chamber as a settling chamber lmk thanks
Not at the moment no, but I will be working on more Waterbox tanks soon.
This work on the IM nano 15 cube that was just released?
Yes this works on the Nuvo Fusion 15 cube
Nuvo 40
This is incredible. How can one download the files to print our own?
Shoot me an email . Mark@isealive.com
Oh hell yeah
Love the Design could I print it on my printer?
Yes but it going to take some time to finish and assemble.
Hi, congrats for all this development. Done as well but for an automatic version, and slightly bigger (sump version), so I know it is lot of effort! If you're curious to see it: diyaquariumfilters or miaquarium.. I can't put direct link in comment.
I tried to check it out but so much comes up when searching DIYaquariumfilters. I thought you could post links. I wonder if UA-cam changed that recently.
@@ISeaLive Yes UA-cam changed it.. you can try with my name as well "charleslales diyaquariumfilters"
Does the rollermat fit the 25 lagoon?
Yes it does. 👍🏻
Do you still keep other filter media below?
I keep filter media in the second chamber. You could totally put some below the roller mat as well.
Can you make a roller mat for tanks with regular sump to drop in ,
Yes, I am working on one.
How about a roller mat for the most common purchased 1st aquarium and one I have had for several years now... Biocube 32 :) I will buy 1st if you create one!!!
Hi Eric, I’m considering it for sure. I wonder if biocubes have the same size overflow chambers because they have a few different size tanks.
@@ISeaLive Seems like the smaller sized tanks have shorter back chambers in height but look pretty close in all other chambers. Not 100% on that however. Let me know if you create one for the 32, I would love to test it for you.
How about a rollermat for aquaclear 70 and aquaclear 110?
Yeah I would have to get my hand on the specs of the tank and hopefully have access to one to test things.
Those are hang on back filters
Can’t find where to get, where do I get this. I have this IM nuvo fusion peninsula 20. Nvm found it lol, just ordered one 😊
Awesome, thank you Mike
25 lagoon!!!
I think it works for the 25g lagoon
I would like to test an review one
I made the first 5 preorder available for testing and review.
@@ISeaLive how much
Hey I have a custom made ten gallon tank I was hopping if there is a way you can help me with this project 😅 would love to have one of this in my tank
I have a ton of tanks to make these for and not a lot of time. It would be hard to make just one design for a custom tank but I am happy to guide if I can help.
Bro need the 13.5 fluval one
I already made on for the Fluval EVO 13.5. Check out a few videos back.
Where is possible to buy??
Hi Robert, i have them available on iSeaLive.com
Have 2 EVO 13.5s if your looking for comparison beta test.
Do you also have an innovative marine tank ?
I have that tank
It’s a solid tank for sure.
The only problem is you lose the ability to put in additional media, compared to an InTank carrier.
You can still put media below the basket. Maybe I’ll make a basked that does both in the future.
That would be cool / ideal. 👍🏻👌🏻🤟🏻
IM Nuvo 50 please! :)
Interestingly, I made one for the Nuvo 50 last week but my computer failed a a it wasn't saved. All my work was lost. I'll try and remake it this week. I ligit cried when it was lost.
@@ISeaLive Oh damn! I'd be happy to help test! :D
could you make a roller filter for a 24 g aquatop tank
It's coming 👍