Another great video, always interesting and really impressed with what you are doing with your grow on…..it’s going to be sick👍. Pond is looking superb and really glad you’ve cracked the health issues with your Fish. Massive thank you for the shout out, much appreciated. Looking forward to the next update 👍🐟🈲😊
Hi Lee, great entertaining vid as usual! I think the percentage on your autofeeder = how much you want the feeder to increase feed by, if you're using it to grow on. Set it to 0 and it will feed the same amount consistently. The Fd setting I think then is for the amount of feed, I guess measured in amount of time it's on for. That's a garden (orb) spider btw, wolf spiders are more like your house spider and can shift 🕷️ 😳
Profi feeder set up. P is the percentage to increase the feed by each day. If you're growing on the feed amount can increase automatically as the fish grow. I leave mine on zero Lee, found this on the Interweb, thought I would share as I'm guessing you don't want to increase your feeds on a daily basis 👍
www.cotswoldkoi.co.uk/wp-content/uploads/2018/01/skimmer-guard.jpg I put one of these skimmer guards on mine to stop the larger fish chasing food in after I found one inside the skimmer basket, not sure what you can do to stop fry getting sucked in though mucker?
F sets how many feeds you want a day, and the Fd sets the Total amount of feed time. So if was set at 1:30 and you set the F to 6, you will get 6 feeds at 15 seconds each (6 x 15sec = 1.30). The % sets how much you want feeds to increase by each day, so if you're growing on the feed amount will increase automatically as the fish grow.
found this in the manual Fd -Set the total feeding time per dayFor adjusting the total feedingtime per day, press the “Set” button until the display shows “Fd”. Then hold the button for 3 seconds until the display flashes. Now you can adjust the required minutes by repeatedly pressing the “Set” button and the minutes with “+” and “-“. To store thesetting press and hold the “Set” button again for 3 seconds.Example: The setting “10:12” means that the total feeding time is 10 minutes and 12 seconds at one day
Not too sure on the flexi pipe but I know a lot people say you shouldn't use rubber fittings in concrete. Could you not dig a diagonal channel for pvc pipe and use 45s instead of 90s
I did try the diagonal route as you can see I stated the channel but would have been to high at the end off the pond so would have had to lift the hight off the slab!!
@@leehadfield6881 could you channel down the middle and come under the wall and then pop up the otherside of the wall maybe? Would be a nice straight run then and no need for rubber or flexi pipe. More work I know but you love it anyway haha
Howya pal I'd lyv to have the space u have hope it all works out for ye if you were to have a blank canvas and were to do say your right again as a sleeve would you do anything different 😉
Just subscribed to your channel so will be keeping an eye if you start selling some fish when your up and running I will definitely be interested as there's no where around Wales to get some decent koi I live in the rhondda and thers nothing 👎
Very nice video thank you for sharing👍
My pleasure
Another great video, always interesting and really impressed with what you are doing with your grow on…..it’s going to be sick👍. Pond is looking superb and really glad you’ve cracked the health issues with your Fish. Massive thank you for the shout out, much appreciated. Looking forward to the next update 👍🐟🈲😊
Thanks Phil mate, always a pleasure to shout out great channels 🥰
Water quality looks good mate 👍
Thanks mate, water is really good now took a bit to get it there but all good now 👍
Nice one mate it's going to be a cracking grow on 👌👍
Thanks buddy! Should be up and running in a week or so!!!!
@@leehadfield6881 awesome mate 👌
Great video great humour 🤣 where did you get the insulation 👍🏻👍🏻
Thanks Tom. Umm not sure now mate got it months ago. But it’s 10mm under flood stuff you can find it easy on the web mate
Hi Lee, great entertaining vid as usual! I think the percentage on your autofeeder = how much you want the feeder to increase feed by, if you're using it to grow on. Set it to 0 and it will feed the same amount consistently. The Fd setting I think then is for the amount of feed, I guess measured in amount of time it's on for. That's a garden (orb) spider btw, wolf spiders are more like your house spider and can shift 🕷️ 😳
Thanks Jon mate, I’ll set the feeder later on then!!
Orb spider well you learn something new every day 🕷
I wouldn't bother with a skimmer if the pond is enclosed. Then you can max out your water level 😉
True!!!!!
Profi feeder set up.
P is the percentage to increase the feed by each day. If you're growing on the feed amount can increase automatically as the fish grow. I leave mine on zero
Lee, found this on the Interweb, thought I would share as I'm guessing you don't want to increase your feeds on a daily basis 👍
Great, no I don’t!!! I’ll change that later 🤟🤟🤟
Class video Lee 👍🏼👍🏼👍🏼🍺🍺🍺
Caaa boom 💥
Hi big brother do love the t shirt
The king off choppers 🏍
I have a super glide , a victory and a higher booster
What's in your garage bro
Just a black rib boat atm mate. Sold all my bikes a few years ago. But my next one will be a street glide 😎
My last bike was a KTM super duke 1290R
Is there not a hinged weir with a float for those type skimmers?
Yes there is ant, so hopefully I’ll be ok
www.cotswoldkoi.co.uk/wp-content/uploads/2018/01/skimmer-guard.jpg I put one of these skimmer guards on mine to stop the larger fish chasing food in after I found one inside the skimmer basket, not sure what you can do to stop fry getting sucked in though mucker?
Boom!!!! I’m going to make one I think 🤔
Got one of those skimmers and the floaty flappy Weir thingy does the job up to over 2/3 of the height of the opening
F sets how many feeds you want a day, and the Fd sets the Total amount of feed time. So if was set at 1:30 and you set the F to 6, you will get 6 feeds at 15 seconds each (6 x 15sec = 1.30). The % sets how much you want feeds to increase by each day, so if you're growing on the feed amount will increase automatically as the fish grow.
Thanks Rick that’s great info
found this in the manual
Fd -Set the total feeding time per dayFor adjusting the total feedingtime per day, press the “Set” button until the display shows “Fd”. Then hold the button for 3 seconds until the display flashes. Now you can adjust the required minutes by repeatedly pressing the “Set” button and the minutes with “+” and “-“. To store thesetting press and hold the “Set” button again for 3 seconds.Example: The setting “10:12” means that the total feeding time is 10 minutes and 12 seconds at one day
Thanks so much mate really good help that was!!!! 😎😎😎😎😎😎😎😎😎😎😎😎
Not too sure on the flexi pipe but I know a lot people say you shouldn't use rubber fittings in concrete. Could you not dig a diagonal channel for pvc pipe and use 45s instead of 90s
I did try the diagonal route as you can see I stated the channel but would have been to high at the end off the pond so would have had to lift the hight off the slab!!
@@leehadfield6881 could you channel down the middle and come under the wall and then pop up the otherside of the wall maybe? Would be a nice straight run then and no need for rubber or flexi pipe. More work I know but you love it anyway haha
That’s a thought 💭
Howya pal I'd lyv to have the space u have hope it all works out for ye if you were to have a blank canvas and were to do say your right again as a sleeve would you do anything different 😉
Yes mate always something else you’d have in it 🙈
I think fr on the feeder is feeding rate
🤙 thanks
Just subscribed to your channel so will be keeping an eye if you start selling some fish when your up and running I will definitely be interested as there's no where around Wales to get some decent koi I live in the rhondda and thers nothing 👎
Woohooo first customer 🤙🤙🤙🤙🤙
Hi Lee are you going too the koi show at Detling county showground
Woo don’t know! When it it on?
@@leehadfield6881 have found you on Facebook and sent friend request and left you a message
I think I will go mate it’s just round the corner from my in-laws
Why not run the pipe through the drain channel you have before doing floor
Don’t want to block the drain mate, all the water that comes off the roof off the house garage and from the koi pond go through it! 🤪