AOA: Please discuss the weathering effects on this material, if installed at outer doors of a building, exposed to UV light, Heat and cold. Secondly, what is the breakdown of material(s) used in the preparations.
I am a structural Engineer so I could raise some apprehension about this material. * Does it is a highly flammable material? * Does it deform due to external and internal temperature differences inside winter heating. *If it chisels parallel along fibers does it peel off in layers. * does it is made of recycled materials * Does it resist acids and chlorides. * Does its internal ribs have enough inertia to resist its buckling and bulking. * Any provision for fan light * The screws for the door frame will not withstand unless good quality with enough crosssection screw brass studs shall be thermally fixed in the frames. * what about UV resistance exposed under direct sunlight. *What arrangement for the fixation of a mortice lock, tower bolt, and sliding bolts. *Can these door frames compete with WPC frames in durability. *does it need sandblasting for paint application. * Does it complies ASTM D3261 standards
@@naseeminteriorkorner You are absolutely wrong since you are a common businessman who has zero knowledge regarding engineering materials and always tries to use recycled low-grade plastic materials to get Max. profit. Just check the answer to my queries as under. * Does it is a highly flammable material? Ans. YES, All PVC materials catch fire even a kid knows. * Does it deform due to external and internal temperature differences inside winter heating. Ans. YES, deformation occurs due to temperature difference *If it chisels parallel along fibers does it peel off in layers. Ans. YES, bad-quality material loses its plasticity. * does it, is made of recycled materials. Ans. YES dark colored PVC is always made of recycled materials. * Does it resist acids and chlorides. Ans. No. If you put a drop of fuming acid, it will dissolve the material. * Does its internal ribs have enough inertia to resist its buckling and bulking. Ans. NO definitely. * Any provision for fan light. No fan light provision * The screws for the door frame will not withstand unless good quality with enough crosssection screw brass studs shall be thermally fixed in the frames. Ans. Yes, if you do not provide screw stubs for the hinges will be out due to the door frame lever arm action * what about UV resistance exposed under direct sunlight. Ans. Keep Pvc under sunlight for a month and put your foot load on it then see how it crumbles. *What arrangement for the fixation of a mortice lock, tower bolt, and sliding bolts. Ans. no details are shown in the video. *Can these door frames compete with WPC frames in durability. Ans. no, they are very weak *does it need sandblasting for paint application. Ans. yes, otherwise the paint will peel off. * Does it complies ASTM D3261 standards. Ans . NO, American standards will reject this in the first place. Instead of saying no to all answers, you would have to consult some good persons with ample scientific knowledge. People like you in Pakistan make people foolish and sell junk at high prices.
@@healer1000040 some people are illetrate even after digree .. this is not PVC it is HDPE.. what a waste of time discussing on this platforum.. call or visit us sometime will educate you IA
@@naseeminteriorkorner HDPE and PVC are both plastic materials commonly used to manufacture pipes. While the two materials share similarities. HDPE is only suitable for water supply pipes. HDPE never resists UV from sunlight and acid attacks. Did you have any test reports of your so-called fake HDPE material conforming to ASTM standards?. HPDE door frames never work instead in the whole world WPC is used
@@healer1000040 AoA. Good questions by you sir. Please don't waste your time with these peoples as they will not understand you. اپنی لسی کو کون کھٹا کہتا ہے۔
Challenging sawal yahi he bhai k is ki overall price btayen 7ft length 5inch wali, aur widht 3 ft. Complete price btayen taa k easy ho, sqft ka rate samajh se bahir he
اسلام علیکم سر باقی تو ٹھیک ھے لیکن ھمارے contractor کہ کہنا ھے کہ اس نے اضمیر ٹاؤن میں استمعال کیا تھا پہلے ساہز غلط لگیا تھا اس کو جب دو بارہ لگایا تو سوراخ کھوچل ھوگے ۔
Bhaie is k liyee palisterr k karegar bhi achey honaye chahiyee jo pakistan mey mushkil hy kiyok dawazey ka saize bhi braber chahiyee oper neechy ek jasa
بہت عمدہ ہے اور دیکھنے میں پائیدار بھی معلوم ہوتی ہے.
MA SHA ALLAH zabardast
Good achivement
Zabardast, looks easy to install and durable.
Good work bro..
It's a very useful for us...
Bohat Pasand Aya yah meterial
Looking forward to be used in your project... IA
very nice video, useful information
Keep it up
Good work & useful
Great, Keep up the good work!
Ma sha Allah very smart inovation
Zabardast janab
Nice jee ❤
السلام علیکم بھائی چوگاٹھ کا سائز چوڑائی میں باہر سے پیمائش شروع ہوتی ہے یا اندر سے کنفرم کر دیں
باہر سے
Pl also arrange hold fast for wall grip
AOA: Please discuss the weathering effects on this material, if installed at outer doors of a building, exposed to UV light, Heat and cold. Secondly, what is the breakdown of material(s) used in the preparations.
Good !!!!
Good
I am a structural Engineer so I could raise some apprehension about this material.
* Does it is a highly flammable material?
* Does it deform due to external and internal temperature differences inside winter heating.
*If it chisels parallel along fibers does it peel off in layers.
* does it is made of recycled materials
* Does it resist acids and chlorides.
* Does its internal ribs have enough inertia to resist its buckling and bulking.
* Any provision for fan light
* The screws for the door frame will not withstand unless good quality with enough crosssection screw brass studs shall be thermally fixed in the frames.
* what about UV resistance exposed under direct sunlight.
*What arrangement for the fixation of a mortice lock, tower bolt, and sliding bolts.
*Can these door frames compete with WPC frames in durability.
*does it need sandblasting for paint application.
* Does it complies ASTM D3261 standards
All of your questions and concerns = No
@@naseeminteriorkorner You are absolutely wrong since you are a common businessman who has zero knowledge regarding engineering materials and always tries to use recycled low-grade plastic materials to get Max. profit. Just check the answer to my queries as under.
* Does it is a highly flammable material? Ans. YES, All PVC materials catch fire even a kid knows.
* Does it deform due to external and internal temperature differences inside winter heating. Ans. YES, deformation occurs due to temperature difference
*If it chisels parallel along fibers does it peel off in layers. Ans. YES, bad-quality material loses its plasticity.
* does it, is made of recycled materials. Ans. YES dark colored PVC is always made of recycled materials.
* Does it resist acids and chlorides. Ans. No. If you put a drop of fuming acid, it will dissolve the material.
* Does its internal ribs have enough inertia to resist its buckling and bulking. Ans. NO definitely.
* Any provision for fan light. No fan light provision
* The screws for the door frame will not withstand unless good quality with enough crosssection screw brass studs shall be thermally fixed in the frames. Ans. Yes, if you do not provide screw stubs for the hinges will be out due to the door frame lever arm action
* what about UV resistance exposed under direct sunlight. Ans. Keep Pvc under sunlight for a month and put your foot load on it then see how it crumbles.
*What arrangement for the fixation of a mortice lock, tower bolt, and sliding bolts. Ans. no details are shown in the video.
*Can these door frames compete with WPC frames in durability. Ans. no, they are very weak
*does it need sandblasting for paint application. Ans. yes, otherwise the paint will peel off.
* Does it complies ASTM D3261 standards. Ans . NO, American standards will reject this in the first place.
Instead of saying no to all answers, you would have to consult some good persons with ample scientific knowledge.
People like you in Pakistan make people foolish and sell junk at high prices.
@@healer1000040 some people are illetrate even after digree .. this is not PVC it is HDPE.. what a waste of time discussing on this platforum.. call or visit us sometime will educate you IA
@@naseeminteriorkorner HDPE and PVC are both plastic materials commonly used to manufacture pipes. While the two materials share similarities. HDPE is only suitable for water supply pipes. HDPE never resists UV from sunlight and acid attacks. Did you have any test reports of your so-called fake HDPE material conforming to ASTM standards?. HPDE door frames never work instead in the whole world WPC is used
@@healer1000040 AoA. Good questions by you sir. Please don't waste your time with these peoples as they will not understand you.
اپنی لسی کو کون کھٹا کہتا ہے۔
Nice
👍
Lohey ki chokhat to kat ni prtti hy
Challenging sawal yahi he bhai k is ki overall price btayen 7ft length 5inch wali, aur widht 3 ft. Complete price btayen taa k easy ho, sqft ka rate samajh se bahir he
Good...price of 7 feet length please
Very nice 👌 👍
runing foot hoga ya square fooot
👍🏻👍🏻
سر یہ کہیں گھر میں لگی ھے تو ویڈیو شیر کریں۔
شکریہ
sirrr ggg fee square foot ka price kia haa
Handle lock kasy lagta hy
Sir is it suitable for both side door one normal door and one jali wala door
اسلام علیکم
سر باقی تو ٹھیک ھے لیکن ھمارے contractor کہ کہنا ھے کہ اس نے اضمیر ٹاؤن میں استمعال کیا تھا پہلے ساہز غلط لگیا تھا اس کو جب دو بارہ لگایا تو سوراخ کھوچل ھوگے ۔
جناب نئی جدت سے ٹھیکیدار حضرات تھوڑا گھبراتا ہے باقی کوئی ایسی بات نہی ہے
Assalamo alaikum sir yai chokat theek huti hein
Parice kitni ho gi 5 aur 10 inch wali
Bhaie is k liyee palisterr k karegar bhi achey honaye chahiyee jo pakistan mey mushkil hy kiyok dawazey ka saize bhi braber chahiyee oper neechy ek jasa
Sept 2024...5 or 7 inch ki price kia hy
Sir running ft ki price bta dyn...agr sirf 7 ft yani chokat aik trf se replace krni ho tu...mil jaay gi?
Yes available one side.. @450 rft
Brother 4ft chokat ky andar ki measurement hy yeh chokat mila ker 4ft ho gi?
Or agr possible hy to fitting ki video b upload kery
Plz watsapp 03218508128
Windo krake milty chwkat
اگر اس کا لوہے کی چوکھاٹ سے موازنہ کیا جائے تو یہ کیسی ہے اور وقت کے ساتھ damage تو نہیں ہوتی۔۔۔۔اور سکریو کی مضبوطی کتنی ہے۔
Its peefect
Bhai ap ne ye Nahi bataya ke lock ke soorakh kiye Hain ya ke bad main cutting ker sakte hain
Good Q?
That will be done at lock fixing time
What about hinges?
The door hinges screws will not hold it tightly
Watsapp to get hinges video and pics
Any outlet in Peshawar??
Please share contact in Peshawar
Thanks
Lahore mai kesi site pr apka material lga hu tu pls btain i want to visit
G bhai bilkul hy watsapp 03218508128
is ko lagaty huwy practical original video dikhaiye
Sir ye chowkat window k liye laga sakte he ya nhi pir windows k liye kia karna prega..?
Laga sakty hain window pr bhi
Please share location of shop
ہم مستری اس کو فٹنگ کر سکے گا یا نہیں اور پرستر ہونے کے بعد فٹ ہوگی تو ساڑھے تین فٹ کا دروازہ لگے گا تو اس کے لیے کتنی جگہ چھوڑنی ہے پیمائش کر کے
بھائی آپ واٹسپ پر بات کر لیں یہاں اس بات کو سنجھنا زارا لمبا ہو جاے گا 03218508128
Rate kia hy @@naseeminteriorkorner
Chori kacheri klia bhi mehfooz hai fiber k gait or chokat
7/4 chaukat ka rate kia huga 5” mai our ye block pe lag sakta ha
Agar 9.5 inch chahiey ho to keya mil sake gi
Saari vedio mae price ka wait kia lakin jo basic tha woh aap ny escape kar dia.
will try to overcome my negligance and faults...thanks
Can door frames be used after finishing
Both before and after
Sochnay wala sawal,price batain?
5" @400 rft 10" @700 rft
Bhai ,tehsil samundri me ap ki supply ya,shop hy
Samundri FaislaAbad k pass hy apko agly hi din maal mil Jy ga.. hamari koi branch nhi hy
How much 3.6*7
Practical vedio agr h to send kar dyn
Sir ye bato k dalivry ka seen rahy ga
Watsapp 03218508128
Kia doli fram bhe ha
Can it be used for wooden door.
Yes definately
سر پشاور کو ئ شاپ ھے
Hyderabad me chaukat hongy?
All pakistan delivery hy bhai
Karachi dealer or shop address
بگائی چوکاٹھ نہیں بلکہ چوکھٹ
where your location
السلام علیکم بھائی جان انٹرسٹ ڈور کا سائز 5 فٹ ہوتا ہے اس سائز میں اپ کے پاس چوکٹ مل جائے گی
جی بھائی مل جآئے گی
Sir. Pl tell the price. Its basic thing of today.
Sure brother.... it starts from 300 rft upto 600 rft 5" to 110"
Bhai price 4/7 ft
sir iski price kya hy per runnig feet my
A o a sir ic ki biding kesi hogi
03218508128 Watsap for fiting video.. its tooo simple & easy
Rate bhe bto
Pls sand me location pindi city sadar rd
Watsapp 03218508128
بھائی 84×48 سائز کی کیا قیمت چل رہی ہے
7200 / 11700
Khattai colour available?
We have raw ... u can color or polish in ur own choice
If I want to cut it, how I can do this?
Its very simple ... one can use hand Saw as well as mini Saw cutter... easy
بھائی جان دیہاتی ایریا کے مستری جنہوں نے یہ پروڈکٹس ابھی تک یوز نھیں کی آپ انکی سائیڈ پر کیا ھلپ کر سکتے ھیں
@@sagheerahmed263 g bro we are making video of instalation.. will share soon
Price😊
5 inch or 10 inch price sqr
8x4 size rate please
Installation ka procedure
Vwry easy just screw it
کراچی میں آپ کا کوئی گودام/ورک شاپ ھے۔؟؟؟
نہیں بھائی پر آپکی دعا رہی تو ضرور ہو گا انشااللّٰہ
How to contact in Lahore?
Mian bat price ki jo ni batayi yahi asal chor bazary ka hy
Banda watsap ya call kr leta hu .10 paisa bhi nhi lagta
MATERIAL KIA HAI G . FIBER HAI ? WPC HAI ?
HDPE HIGH DENSITY POLY ETHYLINE
Rate please
Aap n price nahi batai
Price nahi batai
Price?
Réat kea ha
قیمت نہیں بتایا
پانچ انچ چوڑی چوکھٹ ۴۵۰ rft ہوتی ہے قیمت ۷۰۰۰ بنتی ہے
How to contact
03218508128
051 5778926
Price
Price/ft ?
Rs400 rft
قیمت کوئی مچھلی فروش بتائے گا؟
@@fewminutes6307 تمیز دکان سے نھی ملتی اپنے گھر سے ملتی ہے افسوس--- باقی ہم ہیں آپکے سوالوں کے جواب ڈینے کے لئے
It can be burnt so not suitable for safety.
Sir I need to order. Ap guarantee daitay hain?
Yes sure bro.. y not..
Nice
👍
👍👍👍👍
fee runnig foot ka kia price hai
7" ka kia reat hy.adress kia hy please.
03218508128 plz watsapp
Standard size washroom k door frame ki kya price ho gi@@naseeminteriorkorner
Price
Price