Make all street light poles equipped with this type of VAWT, with energy storage in place your town is self sufficient in energy. Very good wind speed you have there, worth investment.
Da, dar cu rețea de aer comprimat. Va scădea mult prețul cu compresoare centrifugale. Iar aerul comprimat poate fi stocat mult timp. Și ieftin tot sistemul.
Dump Loads are such a waist. Dump your excess into a Hot Water Heater at least. When that's not needed a Electric Heater works just fine. You Sir have this going EXCELLENT !
Dump loads are a waste, but you always have to have one on a wind turbine. There is however nothing to stop you also having a dump load to a water heater, and only dumping to the air when the water heater can't accept any more energy.
They just look so much better than horizontal-axis wind turbines... I'm surprised I never see the use of flyball governers with lower-speed higher-torque generators on VAWTs, they seem like a natural fit.
A windmill connected to 17 other pieces = Power! Truthfully, VAWT's are not very efficient but they are quite pretty to look at, and not the absolute eyesore those large-diameter "wind turbines" are. I wish you all the best
@@flyyynt and they nearly made it to the market. unfortunately nearly catching the train is totally different of catching the train or nearly missing it.
True, a vertical axis wind turbine only harvest 8% of the available wind energy, while a horizontal can do 40% the rest just passing through. That's why all the commercial wind farms are horizontal.
@@johnq8792 Not true. Well designed darrieus VAWTs can go up to 40% which is close to HAWTs. The only reason you don't see them at large wind farms is that mechanical design is challenging for the bigger ones.
Wow. That is a beautiful machine! 4.5KW is a lot of juice, that is if you have the wind enough of the time. The post has no bracing. Are the lateral stresses on a vertical wind turbine relatively low because of the push-pull kind of blade scheme?
Nice I hope they have used aluminium in the blade construction... Being able to recycle components will be a big bonus going forward. A great design big thumbs up from me.
I've built VAWTs for over 50 years, but all my turbines are geared down 60:1 and compress air. I have a plethora of pressure vessels and my turbines keep the pressure at 120 psig. I then run compressed air through modified steam engines to produce 120 vac, 220 vac, single- and three-phase a.c. and direct current for charging electric fence batteries, etc. Building electricity directly from the turbine is a never-ending rabbit hole - too many variables.
@@WhatDadIsUpTo Every time you convert an energy source from one form to another, there are loses. Where as if you store the energy directly in batteries your loses are minimal. A steam engine running on air is horribly inefficient compared to an electric motor.
@davefroman4700 None of my electric motors will run on air. MY air is free. When the wind blows (I live in Texas, mind you, and there's ALWAYS wind) my turbines spin up and compress it (the wind . . . air). I'd bet you lunch my air tanks will outlast ANY other storage battery you come up with! I've been at this nearly 60 years. How long have you been at it - storing electricity in batteries?
@@WhatDadIsUpTo Sun and wind are counter cyclical. When you do not have one? You typically have more of the other. Single source systems need more storage. And storage is still the expensive part of the equation for all but the do it yourselfer.
They are lift based rather than drag based. Drag force decreases drastically as the blades approach wind speed, whereas lift based blades typically turn much faster than the wind.
Nice set up you have! What brand are the wind turbine, where did you buy it and how much did you pay for it? Are you satisfied with the quality? I see you use Fronius and ABB witch is top notch quality so I guess you wouldn’t settle for som low quality wind turbine. Good luck and gratulations with your system!
Wypasiony wiatrak, kręci się, że aż miło popatrzeć. Aż prosi się, aby postawić ich tam więcej :) A swoją drogą ile on kosztuje z postawieniem? Pytam z czystej ciekawości.
I feel your customer will be very happy on this vertical wind generator, one of the best ones on UA-cam for sure, who makes it?, you say it's made in Poland, from the construction I feel it's well built unit, now I wonder what the cost is on the unit - installation.
At 18: 13 with all those revolutions, I am surprised that he said, " Inverter did not kick in yet!" At 18 :43 when he said " She started generating now." well as he said, she was spinning crazy high. I would have thought that it would kick in a lower revolutions. It is a nice turbine.
From what i heard it is good to not have even number of blades in case of horisontal wind turbine because the blade will gonna interact with wind disturbed and slowed by the tower and it will transfer created vibrations to the blade on the oposite side(but there are big horisontal wind turbines with only two blades...). 3 blades is a minimal number to have disc like behaviour/stability(for horisontal wind turbine). But i dont think that all that is significant for VAWT. Number of blades will gonna influence speed of rotation, more blades=slower but you will gonna get more torque(with the same distance of blades from the axis of rotation), so 4 blades will be slower than 3 blade system but it will gonna spin faster than 6 blades turbine(with the same radius). Also more blades=less efficient. as the air flow wil be more turbulent as the blades are closer to each other. Bigger version from this company ECOROTE 9800 have 5 blades.
Very interesting. Marek I'm presently researching for a turbine system to install in a completely off-grid house in the wilds of Donegal. Your system is far too powerful for my needs and I'd be interested to know if you know of any other lesser powered alternative? You mention that you bought your system in Poland. Perhaps you would give me the name of the manufacturer? Our needs are relatively modest - to be able to run a few light bulbs, and charge computers/ phones and then to heat water or a dump heater with the excess. I'd be very grateful for any advice. Thanks for the video.
Sau baterie auto + motor 12v-pompa 35w 220v.Pompa de apă de la mașină de spălat rufe are rotor magnetic. Sau caută la auto că sunt motoare de pornire cu magneți 12v.Dar îți trebuie apoi convertor 220V. + baterii.
Normalnie turbiny Darrieusa podobno same nie startują, trzeba je wcześniej rozpędzić. Czy Ty rozpędzasz ją elektrycznie, czy wystarczają łopatki, które są założone na generatorze (może to tylko chłodzenie)?
I love this video and your install. I'm in England and REALLY struggling to understand what wind turbine options are available to me. I would be really grateful if you could tell me where I can purchase this setup.
yep it looks nice, but more power? everybody say that it is less. Anyway, looking at price I see that it cost three times more than a similar power rated horizontal axis turbine. I even invented a ”better” design as a child and was curious if this kind of turbines are efficient. My idea was to increase the surface of the wings without hindering at return. Even the angle of the wing is helping for a side to be pressed less than the other one, at return there is load on it. What to do to have the wing on a side and vanish at return? My design was a door like wing with the hinge on the outside. so when the blade face the wind the door will be closed and wind hit it on thin section. 90 degrees later the door still closed and pushed closed in the frame of the blade, so will oppose the wind with full surface. 90 degrees later again no wind resistance, still closed but wind is hitting the thin section. but few degrees later the door will open since the frame will be toward wind. when the frame will fully face the wind the door will be open, hanging on the hinge, offering the least resistance to the wind. Made a model for testing, and it was spinning like crazy, so the theory works. But had no idea about efficiency. And I really doubt that vibrations will be easy to control. Maybe only in huge models with slow speed. But I realize now that this models are not so efficient. This means no more power.
@@mark8664 Words are enough here, because is just chat, is not a production line where the worker needs to see a clear design, since he cannot reinvent what engineers were able to invent and design. Now, if you cannot transform the words in picture, it does not matter, just say wow and scroll to the next comment. If you are really interested in the concept, then with a little patience you can draw yourself the picture. I already gave you the clue: I invented it having just a hunch, and I am not a genius. Quite opposite. If you have troubles with a certain step, just ask and I explain. I do not bother to draw a simple sketch.
@@ehombane Whatever, I'm sorry to trouble you I just was thinking out loud. I realized for myself that when it comes to inventing a picture is worth a thousand words.
Do you have some daily kwh generated? most the times in the video its like 1.7 kwh, small numbers, depending time of day of course you shot it.. would be curious to see a daily chart for maybe a streight week :)
@@bmsfx thanks for the link. wow, not very good ROI, So there are about 3MWh in three years. this is about 750 euro. Two more years for ROI. And I am not sure if the pole and installation is included, I assume not. Plus the inverters wires and all. Maybe goes toward 10 years ROI. But still good, if it works two or three decades. However, I see that prices for a similar size horizontal axis, is the third of the price, and it seems that efficiency is better for those. I need to find similar production table to compare the real output. Interesting. pvoutput.org/aggregate.jsp?id=45656&sid=41631&v=0&t=y is a solar install of similar output. Comparing apples with oranges... and more, at both not all the data is recorded, since is mentioned partial years. However, for the solar system I see a target of 1600 USD. It s quite cheap, so maybe is a second hand system or a nice grant. But that target was met twice, so even with market price the system is almost paid back. better than wind.
@@ehombane This link shows the produced energy of PV sun panels not of this wind turbine. Unfortunately we do not get quit easy any feedback from Mikrogeneracja... I would be interested on the axial flux generator and the wind turbine, in terms of conception, parts and dimensions to buy one other make one my self.
@@tonyfernandes7592 I was not the one to claim that the link is showing the windmill production. Bmsfx commented previously about the link as you can see. I took it as true information. I noticed that the site is dedicated to solar panels, but I assumed that the guy found it useful for windmills too. In fact is just monitoring production, it does nor matter what produced it. Sure, if many will do this, will mess with global stats, , but we wee interested only on that turbine production. Now that you mentioned it, I looked with more attention at graphs, and it looks like solar, I mean rising in summers and lower in winters. I assume in winter is more wind. And looking for some stats in my country, my assumption is right. But what do I know, maybe in Ireland the wind is different related to seasons. I have no idea, maybe the guy who posted the link got confused.
At about 13:47 in this video: In Florida, USA -- where I was born & raised -- that could EASILY be _TWO HOURS LATER,_ minus the LOWER TEMPERATURES...😉 BTW, *NO* disrespect intended! *I ♥ VAWTs!.*
Are viteză prea mare. Pentru că bobine le nu au miez din fier. 1 rotor cu magneți + 2 statoare cu bobine cu miez din fir și obții de 5 ori mai mult curent. Trebuie mărite brațele iar partea de jos trebuie să aibe brațe cu rulment pe stâlp.
no wlasnie chyba damy 3 odciagi do tego masztu fakt jak podmuch idzie do sie kołysze troche odciagi zalatwia sprawe a maszty w dobrej cenie bardzo bo jeszcze 12 lezy (orginalnie do turbiny skystream )
Mikrogeneracja odchylać wiadomo że się może ale zastanawia mnie tutaj zmęczenie materiału jak długo będzie się tak odchylał? Rok, dwa czy dwadzieścia? Tutaj jest problem bo jak 20 wytrzyma to ok ale jak 2 to trochę lipa.
We are Saved by Grace Through FAITH NOT WORKS. Salvation is a free gift from GOD given to those all who will believe LORD JESUS CHRIST DIED AS A SALVATION LAMB for our sins by the BLOOD OF LORD JESUS CHRIST HIS BLOOD CLEANSES OR SINS
Bo mieszka w Irlandii i ma interes w tam bo przecież prawo energetyczne i biurwy w Polszy nie mają w interesie zebys miał to na działce. Gdyby mógł to by pracował w Polsce. Zapytaj tych 3mln które wyjechały dlaczego?
Ecorote 2800 is rated as 2800W wind turbine(14m/s wind for 3KW)... for 5KW you would need something like Ecorote 9800(10m/s for 6KW) or Ecorote 19000(7.7m/s for 5KW).
Mikrogeneracja jest zdaje się tak zajęty, że nie ma kiedy z ludzmi na wyspie pogadać. A to dziwne, bo tutaj stawia się zwykle na rozszerzanie personal networking. No ale to jego biznes. A kolega z jakiej częsci Clare, jeżeli można zapytać? Bo ja zachodnio-północne co. Limerick i coś będę chciał pewnie kupić z odnawialnych źródeł.
Make all street light poles equipped with this type of VAWT, with energy storage in place your town is self sufficient in energy. Very good wind speed you have there, worth investment.
Vivek Prabhu in chines they have light polls that have both Wind turbine and Solar power and LED lights. So no need to connect to grid
Or just build one standard wind turbine with 3MW replacing 1000 of those in the video. There is a reason we do it like that.
Da, dar cu rețea de aer comprimat. Va scădea mult prețul cu compresoare centrifugale. Iar aerul comprimat poate fi stocat mult timp. Și ieftin tot sistemul.
That is a great result from a relatively small turbine! Impressive:)
work goes much faster with Avasva plans.
Are you guys not tired of disturbing us with this your Avasva and inplix? You guys will suffer
Dump Loads are such a waist. Dump your excess into a Hot Water Heater at least. When that's not needed a Electric Heater works just fine. You Sir have this going EXCELLENT !
Dump loads are a waste, but you always have to have one on a wind turbine. There is however nothing to stop you also having a dump load to a water heater, and only dumping to the air when the water heater can't accept any more energy.
They just look so much better than horizontal-axis wind turbines...
I'm surprised I never see the use of flyball governers with lower-speed higher-torque generators on VAWTs, they seem like a natural fit.
They do not need them. They are self regulating due to their wing design.
How long will that thing last? That has to be hard on the bearings. What kind of maintenance is required, and how often?
This kind of smal wind turbine could last 25years, very easy to mainten,could visit www.lytransnet.com to know more.
@@lonazhang3503 The link is not working
I could watch this turbine for fifty years.......................
You would need some significant bandwidth from your ISP...😉
Is this still in operation and how does it handle hurricane force winds?
Same question
A windmill connected to 17 other pieces = Power! Truthfully, VAWT's are not very efficient but they are quite pretty to look at, and not the absolute eyesore those large-diameter "wind turbines" are. I wish you all the best
Darrieus VAWTs can be nearly as efficient as HAWTs and work with wind from any direction.
Eyesore?
For me both are pleasant to look at.
@@flyyynt and they nearly made it to the market. unfortunately nearly catching the train is totally different of catching the train or nearly missing it.
True, a vertical axis wind turbine only harvest 8% of the available wind energy, while a horizontal can do 40% the rest just passing through. That's why all the commercial wind farms are horizontal.
@@johnq8792 Not true. Well designed darrieus VAWTs can go up to 40% which is close to HAWTs. The only reason you don't see them at large wind farms is that mechanical design is challenging for the bigger ones.
Nice use of the earth wire and null ;)
That's one of the coolest wind turbine I've seen.
Nagyon jó! Szuperek a bemutató videók!
Wow. That is a beautiful machine! 4.5KW is a lot of juice, that is if you have the wind enough of the time. The post has no bracing. Are the lateral stresses on a vertical wind turbine relatively low because of the push-pull kind of blade scheme?
are those spinning speeds safe for the turbine and blades? Maybe you should add more load to maximax the wind power.
That is an excellent product and I would ask if they are available in the UK as I am presently investigating the prospect of Green energy for my home.
Nice
I hope they have used aluminium in the blade construction...
Being able to recycle components will be a big bonus going forward.
A great design big thumbs up from me.
Wow look at that baby go. Yep In Ireland a wind generator works how it's supposed to. Irish wind power.
Very nice video , Ireland seams to be perfect place to install it , lots of wind.
FWIW: My home state of Florida {USA} would also be an ideal place...👍👍
How much did it cost?
I've built VAWTs for over 50 years, but all my turbines are geared down 60:1 and compress air. I have a plethora of pressure vessels and my turbines keep the pressure at 120 psig. I then run compressed air through modified steam engines to produce 120 vac, 220 vac, single- and three-phase a.c. and direct current for charging electric fence batteries, etc. Building electricity directly from the turbine is a never-ending rabbit hole - too many variables.
But a lot more efficient than steam.
@@davefroman4700
???
@@WhatDadIsUpTo Every time you convert an energy source from one form to another, there are loses. Where as if you store the energy directly in batteries your loses are minimal. A steam engine running on air is horribly inefficient compared to an electric motor.
@davefroman4700
None of my electric motors will run on air.
MY air is free. When the wind blows (I live in Texas, mind you, and there's ALWAYS wind) my turbines spin up and compress it (the wind . . . air).
I'd bet you lunch my air tanks will outlast ANY other storage battery you come up with!
I've been at this nearly 60 years. How long have you been at it - storing electricity in batteries?
@@WhatDadIsUpTo Sun and wind are counter cyclical. When you do not have one? You typically have more of the other. Single source systems need more storage. And storage is still the expensive part of the equation for all but the do it yourselfer.
26:11 Nice windy place Ireland 🇮🇪 yes 👍 good size magnetic array & coil assembly ❤
That turbine is perfect!
Would be nice to know the average kwh per day in a "average wind" day... and the total price of installation as well as reference of wind turbine
What i wind speed ??
How many coils is there in my friend?
How big is the diameter of rotor
Its crazy how fast these types spin compared to the simple savonius kinds.
So much less air resistance
They are lift based rather than drag based. Drag force decreases drastically as the blades approach wind speed, whereas lift based blades typically turn much faster than the wind.
Nice set up you have! What brand are the wind turbine, where did you buy it and how much did you pay for it? Are you satisfied with the quality? I see you use Fronius and ABB witch is top notch quality so I guess you wouldn’t settle for som low quality wind turbine. Good luck and gratulations with your system!
I see that you also have solar! May I ask how you've integrated the wind power with the solar system you have?
Wypasiony wiatrak, kręci się, że aż miło popatrzeć. Aż prosi się, aby postawić ich tam więcej :) A swoją drogą ile on kosztuje z postawieniem? Pytam z czystej ciekawości.
Sensacional esta turbina eólica trabalho extraordinário, parabéns s equipe.
Have you checked the noise on that turbine
this VAWT is approximately 3,860.43 USD or 14 637,00 zł polish dollars
Is it Hipar ?
I feel your customer will be very happy on this vertical wind generator, one of the best ones on UA-cam for sure, who makes it?, you say it's made in Poland, from the construction I feel it's well built unit, now I wonder what the cost is on the unit - installation.
Its made by Hipar and the model name is Ecorote 2800, 14 637PLN on allegro(Polish equivalent of e-bay), 58 671PLN for 9800W version.
A nice Christmas present! And then there were two Well done Marek
What do you use now to rectify the wind turbine? ABB is not making these anymore.
How much sound level (decibels) , when you stand near your wind turbine?
At 18: 13 with all those revolutions, I am surprised that he said, " Inverter did not kick in yet!" At 18 :43 when he said " She started generating now." well as he said, she was spinning crazy high. I would have thought that it would kick in a lower revolutions.
It is a nice turbine.
Me 2 I was stunned
It would be nice if you could show how power it is generating, what is being consumed by the house and exporting to the if any
I would like to know the name brand of this turbine. seems to do well
Not certified, only certified vertical in us is the hi-vawt turbine
Producent was probably Hipar
great work, what the name of this fabric turbine? seems be good
Four blades makes it slightly unusual - three or six blades seem to be typical. Is there are reason for having four?
From what i heard it is good to not have even number of blades in case of horisontal wind turbine because the blade will gonna interact with wind disturbed and slowed by the tower and it will transfer created vibrations to the blade on the oposite side(but there are big horisontal wind turbines with only two blades...). 3 blades is a minimal number to have disc like behaviour/stability(for horisontal wind turbine).
But i dont think that all that is significant for VAWT.
Number of blades will gonna influence speed of rotation, more blades=slower but you will gonna get more torque(with the same distance of blades from the axis of rotation), so 4 blades will be slower than 3 blade system but it will gonna spin faster than 6 blades turbine(with the same radius).
Also more blades=less efficient. as the air flow wil be more turbulent as the blades are closer to each other.
Bigger version from this company ECOROTE 9800 have 5 blades.
I need one done in west Cork...can you do it or recommend someone?
Wow! That’s fantastic 👍
What material are the blades??
Very interesting. Marek I'm presently researching for a turbine system to install in a completely off-grid house in the wilds of Donegal. Your system is far too powerful for my needs and I'd be interested to know if you know of any other lesser powered alternative? You mention that you bought your system in Poland. Perhaps you would give me the name of the manufacturer?
Our needs are relatively modest - to be able to run a few light bulbs, and charge computers/ phones and then to heat water or a dump heater with the excess. I'd be very grateful for any advice. Thanks for the video.
Cu pompă de la mașină de spălat produci ușor 35w mi 220V. Și alimentator telefon + redresor cu baterie auto. + convertor. 12v-220v.
Sau baterie auto + motor 12v-pompa 35w 220v.Pompa de apă de la mașină de spălat rufe are rotor magnetic. Sau caută la auto că sunt motoare de pornire cu magneți 12v.Dar îți trebuie apoi convertor 220V. + baterii.
Great video, good work, thank you!
Normalnie turbiny Darrieusa podobno same nie startują, trzeba je wcześniej rozpędzić. Czy Ty rozpędzasz ją elektrycznie, czy wystarczają łopatki, które są założone na generatorze (może to tylko chłodzenie)?
What brand is this turbine? What is the cost?
Can you put 5 of them close to each other in a row and get 15 kW?
Can you please let us know where you got the whole system thanks
I love this video and your install.
I'm in England and REALLY struggling to understand what wind turbine options are available to me.
I would be really grateful if you could tell me where I can purchase this setup.
May I know why is the ouput of the generator AC and not DC?
What was the wind speed? Maxim wind speed of the turbine?
12m/s
Witam.. !
Śmiga super...!
Ile obrotów uzyskuje turbinka przy 3,7 kW ..?
Pozdrawiam PP.
Looks better than a regular turbine, more power.
yep it looks nice, but more power? everybody say that it is less. Anyway, looking at price I see that it cost three times more than a similar power rated horizontal axis turbine.
I even invented a ”better” design as a child and was curious if this kind of turbines are efficient.
My idea was to increase the surface of the wings without hindering at return. Even the angle of the wing is helping for a side to be pressed less than the other one, at return there is load on it. What to do to have the wing on a side and vanish at return? My design was a door like wing with the hinge on the outside. so when the blade face the wind the door will be closed and wind hit it on thin section. 90 degrees later the door still closed and pushed closed in the frame of the blade, so will oppose the wind with full surface. 90 degrees later again no wind resistance, still closed but wind is hitting the thin section. but few degrees later the door will open since the frame will be toward wind. when the frame will fully face the wind the door will be open, hanging on the hinge, offering the least resistance to the wind. Made a model for testing, and it was spinning like crazy, so the theory works. But had no idea about efficiency. And I really doubt that vibrations will be easy to control. Maybe only in huge models with slow speed. But I realize now that this models are not so efficient.
This means no more power.
True, looks nice but a HAWT same size and money spent would do at least double.
@@ehombane We need to show by using drawings or something because just written words just don't do anything.
@@mark8664 Words are enough here, because is just chat, is not a production line where the worker needs to see a clear design, since he cannot reinvent what engineers were able to invent and design.
Now, if you cannot transform the words in picture, it does not matter, just say wow and scroll to the next comment. If you are really interested in the concept, then with a little patience you can draw yourself the picture. I already gave you the clue: I invented it having just a hunch, and I am not a genius. Quite opposite. If you have troubles with a certain step, just ask and I explain. I do not bother to draw a simple sketch.
@@ehombane Whatever, I'm sorry to trouble you I just was thinking out loud. I realized for myself that when it comes to inventing a picture is worth a thousand words.
What the highest of the pole you made?
Do you have some daily kwh generated? most the times in the video its like 1.7 kwh, small numbers, depending time of day of course you shot it.. would be curious to see a daily chart for maybe a streight week :)
answering myself, i saw on your webpage the link for monitoring :D
pvoutput.org/aggregate.jsp?id=58925&sid=52441&t=w
@@bmsfx thanks for the link. wow, not very good ROI, So there are about 3MWh in three years. this is about 750 euro. Two more years for ROI. And I am not sure if the pole and installation is included, I assume not. Plus the inverters wires and all. Maybe goes toward 10 years ROI. But still good, if it works two or three decades. However, I see that prices for a similar size horizontal axis, is the third of the price, and it seems that efficiency is better for those. I need to find similar production table to compare the real output.
Interesting. pvoutput.org/aggregate.jsp?id=45656&sid=41631&v=0&t=y is a solar install of similar output. Comparing apples with oranges... and more, at both not all the data is recorded, since is mentioned partial years. However, for the solar system I see a target of 1600 USD. It s quite cheap, so maybe is a second hand system or a nice grant. But that target was met twice, so even with market price the system is almost paid back. better than wind.
@@ehombane This link shows the produced energy of PV sun panels not of this wind turbine. Unfortunately we do not get quit easy any feedback from
Mikrogeneracja... I would be interested on the axial flux generator and the wind turbine, in terms of conception, parts and dimensions to buy one other make one my self.
@@tonyfernandes7592 I was not the one to claim that the link is showing the windmill production. Bmsfx commented previously about the link as you can see. I took it as true information. I noticed that the site is dedicated to solar panels, but I assumed that the guy found it useful for windmills too. In fact is just monitoring production, it does nor matter what produced it. Sure, if many will do this, will mess with global stats, , but we wee interested only on that turbine production.
Now that you mentioned it, I looked with more attention at graphs, and it looks like solar, I mean rising in summers and lower in winters. I assume in winter is more wind. And looking for some stats in my country, my assumption is right. But what do I know, maybe in Ireland the wind is different related to seasons. I have no idea, maybe the guy who posted the link got confused.
@@bmsfx love you man
At about 13:47 in this video: In Florida, USA -- where I was born & raised -- that could EASILY be _TWO HOURS LATER,_ minus the LOWER TEMPERATURES...😉
BTW, *NO* disrespect intended! *I ♥ VAWTs!.*
Would you buy this item again Sir ???
Are viteză prea mare. Pentru că bobine le nu au miez din fier. 1 rotor cu magneți + 2 statoare cu bobine cu miez din fir și obții de 5 ori mai mult curent. Trebuie mărite brațele iar partea de jos trebuie să aibe brațe cu rulment pe stâlp.
How much it cost
Zastanawiam sie Czemu by nie wsadzić 3 albo 4 takich elektromagnesów generatorów do jednego słupa skoro obraca się tak spowolnienie?
Can you share the website where you get that
What is the cost of the magnets?
Hi, I'm interested in the way to the rise up the pole whiteout crane, your method, do you have pictures? That you want to share me please?
Wow😲😯 where can i buy that kind of generator?
What is missing from this video is cost and expected payback time
aha masz się kołysze ile taki słup wytrzyma? jak wygląda sprawa zmęczenia materiału?
no wlasnie chyba damy 3 odciagi do tego masztu fakt jak podmuch idzie do sie kołysze troche odciagi zalatwia sprawe a maszty w dobrej cenie bardzo bo jeszcze 12 lezy (orginalnie do turbiny skystream )
siem dowiedzial ze to taki maszt - 25 cm moze sie odchylac u gory
Mikrogeneracja odchylać wiadomo że się może ale zastanawia mnie tutaj zmęczenie materiału jak długo będzie się tak odchylał? Rok, dwa czy dwadzieścia? Tutaj jest problem bo jak 20 wytrzyma to ok ale jak 2 to trochę lipa.
Mikrogeneracja Aha i jak byś do Clare miał zamiar przyjechać to na herbe zapraszam.
what is brand name of the grid tie inverter you are using? or is it just a charge controller?
What the name and model of this wind turbine
Cât costă o jucărie din asta acum în 2022...?
? Wot tipe of graese did you use?
Bạn có thể cho tôi hỏi cánh này dài bao nhiêu, rộng bao nhiêu, và tay cánh dài bao nhiêu được không,xin cảm ơn
Dość duże obroty, jaka prędkość jest bezpieczna?
Siema, ile taka turbina 5kw wyprodukuje wkh rocznie?
Красивый флюгер получился у вас
Is it still working
Link to Turbine?
What brand generator is that?
Bardzo fajny filmik!👍😉
Co to za inwerter wiatrowy ??? Albo moze jaki poleczsz do rurbiny wiatrowej 3 kw
We are Saved by Grace Through FAITH NOT WORKS. Salvation is a free gift from GOD given to those all who will believe LORD JESUS CHRIST DIED AS A SALVATION LAMB for our sins by the BLOOD OF LORD JESUS CHRIST HIS BLOOD CLEANSES OR SINS
Bo mieszka w Irlandii i ma interes w tam bo przecież prawo energetyczne i biurwy w Polszy nie mają w interesie zebys miał to na działce. Gdyby mógł to by pracował w Polsce. Zapytaj tych 3mln które wyjechały dlaczego?
Crazy loud and the thing is almost flying away
From Wish company this wind turbine? Please
Anyone got a link to this kit?
Curious if anyone has the power curve for this turbine.
The best model.
very nice and best wind turbin
what is the wind speed to produce 3kw and 5kw peak???
Ecorote 2800 is rated as 2800W wind turbine(14m/s wind for 3KW)... for 5KW you would need something like Ecorote 9800(10m/s for 6KW) or Ecorote 19000(7.7m/s for 5KW).
Very for you thanks for making my day
Great work
How much the cost.
thank you for this video
buen video ilustrativo
dobra robota ziom. kiedy w county clare zawitasz
Mikrogeneracja jest zdaje się tak zajęty, że nie ma kiedy z ludzmi na wyspie pogadać. A to dziwne, bo tutaj stawia się zwykle na rozszerzanie personal networking. No ale to jego biznes. A kolega z jakiej częsci Clare, jeżeli można zapytać? Bo ja zachodnio-północne co. Limerick i coś będę chciał pewnie kupić z odnawialnych źródeł.
What is the price of this zestaw with wind turbine? :)
nice ponglish... ;) 14.600zł krzyczą na allegro za ecorote 2800.
That's some tasty juice!
výborné video