My dad have an old mercury 40 hp 2 stroke 2 cylinder from 1997 with carburetor. Good engine. We cut go trolling speed for hours with out sparkplugs being dirty and after my dad god sick 5 years ago. The engine had not been started for at least 4 years. I then replaced the impeller, fress fuel on it and 2 stroke oil. It started at the first crank on the startormotor. Mercury for life.
My old man bought a Merc 9.9 for his 14 foot wooden flat bottom. I told him it did not have enough power to get on plane with 2 or 3 people but he insisted it did. Was he ever wrong. Today we just got the 2019 Merc 20 EFI and holy crap. I only used half throttle due to the break in but even with just half throttle it is over 2x faster then the 9.9 and easily gets the boat on plane with 2. Crazy difference.
Just picked up a "used" 2017 25 Elpt 4 stroke merc from bass tracker boats. Previous owner wanted more power. Engine only has 9 hours. Swapping out with my 1988, 35hp, 2 stroke that has seen better days, the same weight as the 25. And don't have to deal with mixing oil as the oil injecttion system that was OEM was 30+ years old. Should perform better than the 35 as well as less engine noise. Thanks to the many youtubers videos and commets I have learned a lot of information on maintence one this engine. Hope to get a few more trips in this year to test it out before winterizing.
Hey brother. Glad to see you always killing it. Wanted to see how I can get my hands on a tbnation decal For my 12ft build I finished. Put it on the water 2 weeks ago and caught my pb largemouth. I have a video on my channel. Thanks again for all the help and motivation. KEEP IT UP!
Great review! I picked up the 20 long shaft with power trim and electric start here in Australia 3 months ago. Have 50 hours on her so far and its such a great motor on my quintrex 390 outback explorer. Have changed the engine oil and filter and gear lube and it hasn't missed a beat at all. I added a solas 9 pitch stainless prop and it hauls ass with hole shot compared to the stock 10 pitch.
I think that’s the perfect motor for a 14 footer. I’d probably go with more power for the 5mph in a 16 footer. Just my opinion. I think you got a great deal on the 25 and it looks like it belongs in your boat.
@@TinyBoatNation I'll let ya know when I run it. Might be a few weeks. Going on an old Legend 14.5' widebody fishing boat. Caught an 18 pound salmon deep trolling lake huron with my mom and sister in july. #tillerlife baby!
@@TinyBoatNation hey Michael, I got out with my Mom today and we finally broke in the 20hp. Wow, we were impressed. Our boat is bare bones and after I had it trimmed all the way out, it went 26mph and messed up her hairdo pretty good haha. Nice to be able to have a normal conversation at idle or trolling speeds. Gets our boat on plane around 1/3 throttle. Lovely motor and design all around.
Great video. I am still breaking in my 2019 Merc 20hp EFI. Should be able to finally go WOT tomorrow. Love this motor. Big change from my old 1991 25hp Merc. Hope Pond Scum has a great season! Love the name! LOL.
What is a safe distance for the transponder of a fish-finder from the prop so there is no interference? This is my first time installing one. Nice video. Thanks.
I bought this outboard few weeks ago and love it. I have one question, my water pump stream never even gets warm seems to be the same temperature as the water. Is yours like this as well? My motor is brand new 2020 I’m thinking the thermostat might be stuck open? Or is the water stream just by passed and isn’t the water coming out of the motor?
Is it really portable? I m considering buying it, but my biggest concern is weight. The issue is that I cannot keep it on the boat. Have to put it on every time I go on the river
Hi I have the same motor except 15 hp. I notice that yours makes the same gurgling sound as my outboard when I am about 1/3 throttle, Do you know what is causing that noise? The waters starts to spray to the side of the engine when the noise starts.
I've this exact motor on a 1542. And it's a great motor. 4 ppl 2 adults. 2 kids. 48 qt icebox . battery. 6 gal tank . 6 rods. 4 tackleboxs. Bimini top. 25mph all day. Best motor I have ever owned.
@@thomasbrownjr6477 mr. Brown the 20 horse motor will push you 26 miles an hour with your whole family in it and all your gear excuse me I said I should have said 25 that's very fast
Really debating between this 20 and the 25 for a Lund fury 1600 tiller, have any advice on which one to go with? Will I see a noticeable gain with the 25 over the 20?
@@TinyBoatNation Any particular reason? Really the reason i'm considering the 25 merc over the yamaha is first because I can get a better deal on it and second i've been seeing the Yamaha's tend to have more noise and vibration. You wouldn't recommend the 25 merc over the 20 merc?
power to weight ratios are pretty important especially when you consider the Max horse power for tiller boats are de-rated compared to steering wheel versions. I'm in a similar situation where My 60CT is under powered but max is only 75HP but the 75HP is over 100lbs heavier! Is 100lbs worth 15hp gain?
60Hp CT is a great motor and propped correctly should be very comparable to 75HP. The 75Hp you can't get in Command thrust, that limits your prop selection meaning you might end up slower once you get your prop figured out. I would say depending on boat style, stay with a 60hp, maybe try a SS prop and move weight around to help with efficiency. Command Thrust lower is very important to your set up, you have better propeller selections available and that may get you where you need to be for performance.
Sure, it's lighter, but your 25hp is a 3cyl 526cc engine vs a 2cyl 333cc engine. The bigger motor will definitely have a low-end torque advantage; 27 lb-ft at 1000rpms lower than the 19lb-ft peak for the 20hp. Not saying the 20hp is not a great motor, but there is more trade-off than just 5hp. Agree that the tiller is very cool !!
Anyone notice a rattle sound coming from their new 15 or 20 hp? Mine is a 2021 and I can hear a definite rattle in the 1/4 to 3/4 throttle range. Not sure if this is common in these models or if mine has a problem.
@@TinyBoatNation, here is a link to a recording of the EXACT same rattle sound my brand new 2021 is making. It doesn’t start until around 1/4 throttle. Can you say with certainty (from experience) that this rattle is common? ua-cam.com/video/Ws1nAgCaFi0/v-deo.html
how much does your boat weight? i have a 1648 alumacraft modified v jon boat. i do a lot of river fishing. would the 20 be a good motor to have. my boat weighs 320 lbs.
The weight difference between these is actually more when you accept a few facts. One, the 20HP is just plain lighter, and you really dont need the power trim. At worst you add trim tabs at 10 lbs total transom weight and get fantastic attitude control out of it (much better than power trim). The 25HP is much, much heavier, and that outboard is a real back breaker to manual tilt. You pretty much have to get the power trim model. And now you have a lot more weight on the transom, so you probably also have to get trim tabs also to help with stern squat. Having said all that, the rigged weight difference between the two can be quite substantial all said and done. For 5 more HP? No thanks. IMO, the 25HP (Merc/Tohatsu current gen) never makes sense. If you simply must have more power than the 20HP, then go straight to the 30HP. Dont waste your time with the 25HP.
I run a 20 hp Tohatsu, very pleased with performance. But the 25 will justify its weight when hauling much heavier loads, where as the 20 will still be adequate, it wont keep with the 25. the age old dilemma , how often will you load heavy and need the extra torque and power, is the extra weight and cost really worth it ? Also, the 25 Tohatsu is same as 30 hp. You get the 5 additional h.p. on top end rpms, the 30hp runs 250 rpms higher then 25hp. So thats a big expense for nothing in my opinion.
@@rayk.5833 The Tohatsu 30HP has a higher power to weight ratio than the 25HP, just like the 20HP (EFI) vs the 15HP(EFI) and 10HP(EFI). There are those that would say going from the Tohatsu 10HP (EFI) to the 20HP (EFI) is merely 10HP more at the top end and that does not justify the extra expense. Ridiculous, IMO. With smaller outboards, that extra top end is what you need. In the larger outboards I would agree, say 90HP+ . Unless you are racing, the top end really is not that significant. Its more about holeshot and cruising RPM/speed. I have a 2020 Tohatsu 20HP (EFI), BTW. Its a fantastic outboard. But if I wanted a little more, I would go straight to the 30HP. The 25HP just does not make sense, just like the 15HP does not make sense. If you are strapped for cash, well, then you are strapped for cash. My suggestion here is save up another couple months and get the top HP to weight outboard for its class. You will be glad you listened. If I wanted even more, I would skip to the 60HP. Yes, thousands more than the 40HP. Save up.
@@TinyBoatNation Thank's, this's good result. I bought the same engine and I have a boat of 15 ft. Waiting for the launch, I hope the motor will make me happy.
Both are good motors. You will be able to find parts and service dealers for Mercury almost anywhere in the world, Suzuki is very limited for customer/dealer support.
Buddy’s got a 2012 25hp. Beautiful motor trim/tilt and electric start. That the good news, I drive it fairly regularly. It’s a dog, couldn’t believe it.Got a 15 Evinrude two stroke it’s 1987 think it would dust your 20 too.
I have an 82 Evinrude 25 HP 14ft Jon deep and wide with Decks it pushes me with a buddy at 26 mph...? I'm not bashing on the new motors definitely quieter but still love the old 2 strokes especially since they don't cost a third or even a quarter as much as a new motor?
Great review, BUT you didn't talk about the best part which is EFI!!! No carbs to deal with, no bad starting after letting it sit for days/weeks/months. ALSO with EFI you have a battery-less motor and the pull start goes after 2 pulls. 1st pull charges the EFI system and then it starts on the 2nd pull. So this motor is 57 lbs lighter than you Mer 25, BUT you also could ditch the battery for extra weight savings (but I recognize you have a battery for boat electronics). But you could be saving another 20+ lbs by losing the battery.
You have to have a battery connected at all times regardless of whether its dead or charged or else you will damage the charging system. If somehow tou throw your battey overboard and have to get home, it will run fine, but bye bye charging system.
So look at the ECU, it probably has Mitsubishi stamped on it. All these small efi battery less efis are licensing their ECU. You don't need a battery, it won't fry the charging system if there is nothing connected.
Love your videos, I’ve learned so much from you. Thank you, and keep up the great work
My dad have an old mercury 40 hp 2 stroke 2 cylinder from 1997 with carburetor. Good engine. We cut go trolling speed for hours with out sparkplugs being dirty and after my dad god sick 5 years ago. The engine had not been started for at least 4 years. I then replaced the impeller, fress fuel on it and 2 stroke oil. It started at the first crank on the startormotor. Mercury for life.
Yup
Nice of them to have lended you the motors!
Thanks for this awesome video brother. This is the exact engine I am putting on my pontoon boat
Very impressed with power to weight ratio, and quality and how quit it is.
Ah, a mercury badged tohatsu. You going to love it. I have the new 29 fuel injected one
My old man bought a Merc 9.9 for his 14 foot wooden flat bottom. I told him it did not have enough power to get on plane with 2 or 3 people but he insisted it did. Was he ever wrong. Today we just got the 2019 Merc 20 EFI and holy crap. I only used half throttle due to the break in but even with just half throttle it is over 2x faster then the 9.9 and easily gets the boat on plane with 2. Crazy difference.
Just picked up a "used" 2017 25 Elpt 4 stroke merc from bass tracker boats. Previous owner wanted more power. Engine only has 9 hours. Swapping out with my 1988, 35hp, 2 stroke that has seen better days, the same weight as the 25. And don't have to deal with mixing oil as the oil injecttion system that was OEM was 30+ years old. Should perform better than the 35 as well as less engine noise. Thanks to the many youtubers videos and commets I have learned a lot of information on maintence one this engine. Hope to get a few more trips in this year to test it out before winterizing.
Picking mine up this Saturday 3/13/21 after watching this video. If it planes your boat it will surely plane my Lund bare bone ssv14.
That thing is sick!!! I definitely like the throttle mechanism the placement is perfect!! Great review!!
Excellent review. I have a 12’ Dynous Toyo raft that will easily take 25 hp but this seem more than capable.
You made my decision easier. Thank you.
Thanks from Tasmania because of your great video I have just purchased one 😎✌️
Hey brother. Glad to see you always killing it. Wanted to see how I can get my hands on a tbnation decal For my 12ft build I finished. Put it on the water 2 weeks ago and caught my pb largemouth. I have a video on my channel. Thanks again for all the help and motivation. KEEP IT UP!
My through-bolts prevented a motor theft last summer. Same model.
Picked up a 2020 15HP 4 stroke EFI and it flies on a 14’ J boat. 24 MPH... love it.
Damn I am about to buy a 20 like his in the video this week for my 1542 flat jon do u think it's overkill or should I send it
@@Jake-xm6fl send it bud. I got a 20 on my 1440 and she flies with a boat loaded down with decoys, a cooler, shotguns, ammo and a buddy!!!
@@davidb6990 I ended up with a 2021 Merc 25hp! Could not find a 20merc anywhere in the country at the time
How heavy is the engine? Thanks
My 2015 20HP Merc has the throttle tensioner too,
Hell yeah, no bad days baby!
Nice video, VERY thorough. It was impressive what the 20 HP could do on your boat, but if it were windier and wavy, I think you'd miss the 25.
According to the operators manual for the 2021 model, once you are at the 2nd hour of break in you can run it at WOT for less than 1 minute.
Thanks. Very helpful video.
Thanks. Very informative video. Just how heavy is your boat? That 20 seemed to do just fine but the actual weight would be helpful. Thanks. New sub.
I DEFINITELY GETTING THE 20HP - THANKS
Great review !
Great review! I picked up the 20 long shaft with power trim and electric start here in Australia 3 months ago. Have 50 hours on her so far and its such a great motor on my quintrex 390 outback explorer. Have changed the engine oil and filter and gear lube and it hasn't missed a beat at all. I added a solas 9 pitch stainless prop and it hauls ass with hole shot compared to the stock 10 pitch.
How fast do you go in what boat
Great video. Was the 20HP a short or long shaft and what was is your boat's transom height?
I think that’s the perfect motor for a 14 footer. I’d probably go with more power for the 5mph in a 16 footer. Just my opinion. I think you got a great deal on the 25 and it looks like it belongs in your boat.
Great review Michael. I went and bought one. Thanks.
@@TinyBoatNation I'll let ya know when I run it. Might be a few weeks. Going on an old Legend 14.5' widebody fishing boat. Caught an 18 pound salmon deep trolling lake huron with my mom and sister in july. #tillerlife baby!
@@TinyBoatNation hey Michael, I got out with my Mom today and we finally broke in the 20hp. Wow, we were impressed. Our boat is bare bones and after I had it trimmed all the way out, it went 26mph and messed up her hairdo pretty good haha. Nice to be able to have a normal conversation at idle or trolling speeds. Gets our boat on plane around 1/3 throttle. Lovely motor and design all around.
Great review. Mine arrives tomorrow (2021 model). You answered a lot of my questions 👌
What is the weight of your boat? Thanks for including the pitch of the prop used, that's helpful in getting ideas for my own boat.
Great video. I am still breaking in my 2019 Merc 20hp EFI. Should be able to finally go WOT tomorrow. Love this motor. Big change from my old 1991 25hp Merc. Hope Pond Scum has a great season! Love the name! LOL.
when you rivet angle over the transom in the back are you making a c channel with two pieces or just having and edge on the back and on top?
Thanks, i was hoping you'd do the comparison.....
Yeah tohatsu/mercury make a nice little motor.
What is a safe distance for the transponder of a fish-finder from the prop so there is no interference? This is my first time installing one. Nice video. Thanks.
Ok I have 2014 bass tracker 20hp mercury have trouble with speed and getting on plain it has 9.25 x 10 prop any ideas
Did you connect your fuel line directly to the boat tank or did you use portable tank. If main tank, did you use your primer bulb?
Any advice on propellor improvement for top end speed, tohatsu efi 20. Running standard aluminium 10 pitch
I bought this outboard few weeks ago and love it. I have one question, my water pump stream never even gets warm seems to be the same temperature as the water. Is yours like this as well? My motor is brand new 2020 I’m thinking the thermostat might be stuck open? Or is the water stream just by passed and isn’t the water coming out of the motor?
Is it really portable? I m considering buying it, but my biggest concern is weight. The issue is that I cannot keep it on the boat. Have to put it on every time I go on the river
What length should I put that 20hp motor on I am getting a 14ft jon boat from academy
what size is that boat? Approx whats the weight? looking at a 25 or a 20 and this should help me decide what to get for my boat. thanks
Awesome outboard, quiet and powerful. I'm personally not a fan of motors with brake in periods but not a deal braker.
Every motor has a break in period it’s just if the manufacturer tells you about it
Nice Tohatsu
Fortunately. I'd never buy a Mercury over 30HP.
Mercury is +2kg over the MFs 20e.
Can I use a Jon boat for my hours needed to get the 6 pack license?
Hi I have the same motor except 15 hp. I notice that yours makes the same gurgling sound as my outboard when I am about 1/3 throttle, Do you know what is causing that noise? The waters starts to spray to the side of the engine when the noise starts.
I cant find any info reverse the throttle from left to right on mine. Manual doesnt say anything about it. Any know or know of a vid to do so?
I got the same one! its on my 16 footer, couldn't have a better outboard.
Agreed
MikeTyke how long have you had it? Any issues?
@@hunterlee6927 I've had mine since November. No issues
I just picked up the Merc 15 HP EFI 4 Stroke on a 1448 Jon/Bass Boat so I think this is the right size for the 14 ' boat.
I have a Lowe 1240 flat bottom. Rated for 10hp but this 15 looks good. Thoughts?
Did you through bolt the 20 down?
Thinking of a 20hp on a 1648 riveted boat that weighs 275 lbs dry. You think it will run fine. Biggest load would be about 800lbs when hunting.
So are you going to get this one now
I like the sound
How much weight can you loose to drop the electric start feature?
How does it tilt for shallow water? What is trolling speed for fishing?
what trim hole do you have it set in
Nice tohatsu!
What prop is on this? 10 pitch x ?
Good evening, I am from Iraq and want to buy this engine. How can I buy
I've this exact motor on a 1542. And it's a great motor. 4 ppl 2 adults. 2 kids. 48 qt icebox . battery. 6 gal tank . 6 rods. 4 tackleboxs. Bimini top. 25mph all day. Best motor I have ever owned.
I'm adults must only weigh a hundred pounds of Peace in cuz that's impossible maybe 20 miles an hour at best
@@dewaynemarcionette6112 I weigh 300lbs. Wife weighs 200lbs. Both kids weigh 100 each
@@thomasbrownjr6477 mr. Brown the 20 horse motor will push you 26 miles an hour with your whole family in it and all your gear excuse me I said I should have said 25 that's very fast
@@dewaynemarcionette6112 it will do 33mph with just me. Tracker topper 1542 only weighs 145lbs empty
Is that a stock prop mr. Brown that motors one-in-a-million if that's the case but good for you sir appreciate you
Really debating between this 20 and the 25 for a Lund fury 1600 tiller, have any advice on which one to go with? Will I see a noticeable gain with the 25 over the 20?
@@TinyBoatNation Any particular reason? Really the reason i'm considering the 25 merc over the yamaha is first because I can get a better deal on it and second i've been seeing the Yamaha's tend to have more noise and vibration. You wouldn't recommend the 25 merc over the 20 merc?
9.9HP and this motor have big difference in terms of power?
power to weight ratios are pretty important especially when you consider the Max horse power for tiller boats are de-rated compared to steering wheel versions. I'm in a similar situation where My 60CT is under powered but max is only 75HP but the 75HP is over 100lbs heavier! Is 100lbs worth 15hp gain?
60Hp CT is a great motor and propped correctly should be very comparable to 75HP. The 75Hp you can't get in Command thrust, that limits your prop selection meaning you might end up slower once you get your prop figured out. I would say depending on boat style, stay with a 60hp, maybe try a SS prop and move weight around to help with efficiency. Command Thrust lower is very important to your set up, you have better propeller selections available and that may get you where you need to be for performance.
It's amazing how much shorter engines have gotten over the years , they bigger ones look like robots, lol .
Do you think this could push a 1500 lb boat?
It sounds louder at idle than a honda and Yamaha. Is it me or do other people think that too
57lbs is a HUGE difference on a tiny boat.
Would I be able to convert this motor into a console motor?
Sure, it's lighter, but your 25hp is a 3cyl 526cc engine vs a 2cyl 333cc engine. The bigger motor will definitely have a low-end torque advantage; 27 lb-ft at 1000rpms lower than the 19lb-ft peak for the 20hp. Not saying the 20hp is not a great motor, but there is more trade-off than just 5hp. Agree that the tiller is very cool !!
Yep. I wish the 25's had that tiller!
What is the weight of the boat?
What is considered a tiny boat? Im ordering a 3 meter boat.
мужик молоток..как игрушку 20-ку кинул в багажник 4 тактную)) небось на 115 яме он вообще румпелем спокойно рулит))
No power trim?
what size is this boat and weight? Looking at a alumaCraft V-16 with the 20HP EFI and if it would do the trick?
@@TinyBoatNation In your opinion would you move to the 25hp? Is the increase in engine weight worth the 5 extra HP? Thanks!
Wow! You lifted it by yourself? How heavy was that thing? Nice video btw.
@@TinyBoatNation Ahhh. Thanks for the reply! Love your vids! Keep them coming!
How easy is to move in and out of a car trunk? Seems very manageable?
I like how it’s lighter but was it faster then your 25?
@@TinyBoatNation so you mean the 10 pitch on the 20hp was faster than your 25 with a 9 pitch?
nice to know. funnny how hindsight is 20/20 lol
How big is your boat
Anyone notice a rattle sound coming from their new 15 or 20 hp? Mine is a 2021 and I can hear a definite rattle in the 1/4 to 3/4 throttle range. Not sure if this is common in these models or if mine has a problem.
@@TinyBoatNation, here is a link to a recording of the EXACT same rattle sound my brand new 2021 is making. It doesn’t start until around 1/4 throttle. Can you say with certainty (from experience) that this rattle is common? ua-cam.com/video/Ws1nAgCaFi0/v-deo.html
This one petrol or diesel
how much does your boat weight? i have a 1648 alumacraft modified v jon boat. i do a lot of river fishing. would the 20 be a good motor to have. my boat weighs 320 lbs.
I have a 1648 crest liner mod v Jon mine does 23 mph with a Nissan 18.
I bought one and it pulled to the right so I’m getting a trim tab put on it. They should of made them with trim tabs.
What size boat?
The weight difference between these is actually more when you accept a few facts. One, the 20HP is just plain lighter, and you really dont need the power trim. At worst you add trim tabs at 10 lbs total transom weight and get fantastic attitude control out of it (much better than power trim). The 25HP is much, much heavier, and that outboard is a real back breaker to manual tilt. You pretty much have to get the power trim model. And now you have a lot more weight on the transom, so you probably also have to get trim tabs also to help with stern squat. Having said all that, the rigged weight difference between the two can be quite substantial all said and done. For 5 more HP? No thanks. IMO, the 25HP (Merc/Tohatsu current gen) never makes sense. If you simply must have more power than the 20HP, then go straight to the 30HP. Dont waste your time with the 25HP.
I run a 20 hp Tohatsu, very pleased with performance. But the 25 will justify its weight when hauling much heavier loads, where as the 20 will still be adequate, it wont keep with the 25. the age old dilemma , how often will you load heavy and need the extra torque and power, is the extra weight and cost really worth it ? Also, the 25 Tohatsu is same as 30 hp. You get the 5 additional h.p. on top end rpms, the 30hp runs 250 rpms higher then 25hp. So thats a big expense for nothing in my opinion.
@@rayk.5833 The Tohatsu 30HP has a higher power to weight ratio than the 25HP, just like the 20HP (EFI) vs the 15HP(EFI) and 10HP(EFI). There are those that would say going from the Tohatsu 10HP (EFI) to the 20HP (EFI) is merely 10HP more at the top end and that does not justify the extra expense. Ridiculous, IMO. With smaller outboards, that extra top end is what you need. In the larger outboards I would agree, say 90HP+ . Unless you are racing, the top end really is not that significant. Its more about holeshot and cruising RPM/speed. I have a 2020 Tohatsu 20HP (EFI), BTW. Its a fantastic outboard. But if I wanted a little more, I would go straight to the 30HP. The 25HP just does not make sense, just like the 15HP does not make sense. If you are strapped for cash, well, then you are strapped for cash. My suggestion here is save up another couple months and get the top HP to weight outboard for its class. You will be glad you listened. If I wanted even more, I would skip to the 60HP. Yes, thousands more than the 40HP. Save up.
What is the size and weight of the boat? Speed on screen in miles?
@@TinyBoatNation Thank's, this's good result. I bought the same engine and I have a boat of 15 ft. Waiting for the launch, I hope the motor will make me happy.
a little 20 hp outboard is what rough 9-10 g's
I bet it's fuel efficient 👍🏻
Witch one should i take 20 hp suzuki or this 20 hp mercury ?
Both are good motors. You will be able to find parts and service dealers for Mercury almost anywhere in the world, Suzuki is very limited for customer/dealer support.
I would put that in my 16' center console deep v aluminum Blue Fin.
I would recommend getting a 25 for that. It doesn't cost much more
It’s probably cheaper service the 20hp then the 25hp ????
Buddy’s got a 2012 25hp. Beautiful motor trim/tilt and electric start. That the good news, I drive it fairly regularly.
It’s a dog, couldn’t believe it.Got a 15 Evinrude two stroke it’s 1987 think it would dust your 20 too.
I have an 82 Evinrude 25 HP 14ft Jon deep and wide with Decks it pushes me with a buddy at 26 mph...? I'm not bashing on the new motors definitely quieter but still love the old 2 strokes especially since they don't cost a third or even a quarter as much as a new motor?
I’ll take a 2 stroke any day over a 4 stroke.
KM/H ???
why do you put such small motors on a boat that size must be different with bass boats to aluminium boats here in Australia
why is it bending so much when u give it some throtle ?
I hope that engine didn't have oil in it before it was laid flat in the boot of the car ?
Can be laid flat with tiller side up for transportation
What is EFI ?
Sounds like a European motor 🔥🔥
Nick Villeneuve I love them 4 strokes, right now I have a 60hp jet drive on my 1750 flat bottom.
Give them your 25 hp maybe they wont notice!! 😂😂
Que maquina una lastima q valga tanto dinero es casi imposible comprar uno
Evinrude 25 Etec all day long and will run circles around those 4 strokes
Is Evinrude a four stroke?
Evinrude is a 2 stroke. More durable long life than the 4 stroke models,and more torque with twice the power strokes per rotation.lighter too !
Great review, BUT you didn't talk about the best part which is EFI!!! No carbs to deal with, no bad starting after letting it sit for days/weeks/months. ALSO with EFI you have a battery-less motor and the pull start goes after 2 pulls. 1st pull charges the EFI system and then it starts on the 2nd pull. So this motor is 57 lbs lighter than you Mer 25, BUT you also could ditch the battery for extra weight savings (but I recognize you have a battery for boat electronics). But you could be saving another 20+ lbs by losing the battery.
You have to have a battery connected at all times regardless of whether its dead or charged or else you will damage the charging system. If somehow tou throw your battey overboard and have to get home, it will run fine, but bye bye charging system.
So look at the ECU, it probably has Mitsubishi stamped on it. All these small efi battery less efis are licensing their ECU. You don't need a battery, it won't fry the charging system if there is nothing connected.