Almost could say bandit welder works for deezzzzee. Nuts also Seriously tho these chippers need way more strength than they come with. I think bandit is the best option but room for improvement especially for that huge price tag
I watched your video when you first picked up that unit. I think I was just as excited as you were. Glad to see you've been keeping it busy mostly. Like V belt said, I think they are the best on the market and hopefully they listen to guys like you so that someday, if I can buy one, it will be better than ever!! Be safe out there and thanks for this video.
Thats exactly what I was going for with the aluminum. I’ll see if the new tank they send me cracks too, they did take care of me right away send them a photo of the crack and Theyer getting right on it for a replacement.
Bandit it working on these I’m in good communication with them. Already got the new pre cleaner system. Wonderful design by bandit, they ain’t like some big corporations like CAT or cummins they actually get things done
Good video dude, I am stoked to see you make videos again. I am always interested in what other people are going through. I can relate when shit hits the fan and you have to rig something and problem solve 😂
Another comment I have is 😊 the discharge shoot should be longer. Having it only the length of chipper can see why so so much of flying chips come back and stick to those screens, and cause your headache with clogging. Yes you are so right on the slow shot bleed of, have had this happen to me on different brand, can never get them to stay in up or down position.
It could by a smidge longer, I can see the length does help lesser chance of tree damage however they could of made the chute larger over all, I swear it’s the same size as the 18-19xp models
I dig what you're doing! I'm tooling up to run a similar operation as yours here in Southern Oregon. If I can purchase a Bandit, I'm going to implement your suggestions. What state/area are you based out of?
Thank you! Definitely do it whatever you can these things will make life easier when you’re out on the job, less nonsense to deal with. I’m out in California. Placer county
Thank you for showing 😊 the problems with the build. That fuel filter housing should be old school type ( steel) with sock diaper type fuel filter, who would make a plastic housing for what the chipper is made to do. The whole DEF air filter system seems like a after thought just to make it more Tir 3or4, just a cheap add on. Shame on Engineering at the company.
Yes this is your only hydraulic pump. Runs everything including track functions. You can easily check tension with the front cover off of the engine. When it was loose it was a very short moment slip under large loads when tracking but a slight adjustment all it needed.
@@BrendonVorio so this pump does run off the front pulley of the motor but off set for fitment. Way better stronger larger pump than mobark, I swear their hydro pump is no bigger than the power steering on my truck 🤣
Really appreciate the detailed video on this machine. Would love to see more on it especially in operation. Keep them coming👍🏼 might have to buy one some day
Hi Mr Operator , really great review because you offer solutions to problems and ownership tips, hope Bandit is listening
Same here! Appreciate you.
Almost could say bandit welder works for deezzzzee. Nuts also
Seriously tho these chippers need way more strength than they come with. I think bandit is the best option but room for improvement especially for that huge price tag
Right 😂.
Let’s see if they want to listen and fix these little things. Somehow make it not fall apart as quickly
I watched your video when you first picked up that unit. I think I was just as excited as you were. Glad to see you've been keeping it busy mostly. Like V belt said, I think they are the best on the market and hopefully they listen to guys like you so that someday, if I can buy one, it will be better than ever!!
Be safe out there and thanks for this video.
Check out my newest video they listened and over delivered
She’s been a solid unit been running last week and this week with it.
RDS, weatherguard , and better built are the ones we've had the best luck with. Aluminum is nice for weight and no rust getting in your fuel.
Thats exactly what I was going for with the aluminum. I’ll see if the new tank they send me cracks too, they did take care of me right away send them a photo of the crack and Theyer getting right on it for a replacement.
Boy, you're not wrong.I've had the same issues with my 15XP.Exact same issues , and i'm running a cat
Bandit it working on these I’m in good communication with them. Already got the new pre cleaner system. Wonderful design by bandit, they ain’t like some big corporations like CAT or cummins they actually get things done
Great review man! Hope bandit listens to this.
Me too dealer sent the video out to everyone might have a conversation with bandit about improving
Good video dude, I am stoked to see you make videos again. I am always interested in what other people are going through. I can relate when shit hits the fan and you have to rig something and problem solve 😂
Ohh ya all the time, definitely not all bees and butterflies out in the forest life 🤣
Another comment I have is 😊 the discharge shoot should be longer. Having it only the length of chipper can see why so so much of flying chips come back and stick to those screens, and cause your headache with clogging. Yes you are so right on the slow shot bleed of, have had this happen to me on different brand, can never get them to stay in up or down position.
It could by a smidge longer, I can see the length does help lesser chance of tree damage however they could of made the chute larger over all, I swear it’s the same size as the 18-19xp models
I dig what you're doing! I'm tooling up to run a similar operation as yours here in Southern Oregon. If I can purchase a Bandit, I'm going to implement your suggestions. What state/area are you based out of?
Thank you! Definitely do it whatever you can these things will make life easier when you’re out on the job, less nonsense to deal with.
I’m out in California. Placer county
Thank you for showing 😊 the problems with the build. That fuel filter housing should be old school type ( steel) with sock diaper type fuel filter, who would make a plastic housing for what the chipper is made to do. The whole DEF air filter system seems like a after thought just to make it more Tir 3or4, just a cheap add on. Shame on Engineering at the company.
It should be! That’s how the hydro filter is.
Def is the afterthought of all equipment 🤣
Good job and video Brother. That’s sucks on the transfer tank but that’s one reason I don’t like Deezee
Thank you my man. I’ve had good tanks with them but this is the first aluminum tank. I’m bummed out big time, but Theyer taking care of it
@@IManOPERATOR you’re welcome. Well that’s good.
@4:56 you mention the tensioning of the pump. Is that the main pump they use to supply the undercarriage?
Yes this is your only hydraulic pump. Runs everything including track functions.
You can easily check tension with the front cover off of the engine. When it was loose it was a very short moment slip under large loads when tracking but a slight adjustment all it needed.
Cool thanks. Interesting they run a single and don’t run a pump off the front cover via a gear drive of sorts.
@@BrendonVorio so this pump does run off the front pulley of the motor but off set for fitment. Way better stronger larger pump than mobark, I swear their hydro pump is no bigger than the power steering on my truck 🤣
That’s a bummer on your fuel tank man. What manufacturer is that tank?
It was DeeZee tanks, first aluminum one I’ve ever bought now I don’t trust these anymore 🙃
@@IManOPERATOR That’s sad because that’s all the fuel tanks I buy. I like DeeZee
@@georgeenriquez612 well hopefully that was the fluke one I have high hopes
Delete and tune to 400-450hp. Get rid of all the emissions crap. It’ll be like a whole new chipper
Hehehe it will happen clutch is good for about 420HP so ya it will happen sooner or later
Really appreciate the detailed video on this machine. Would love to see more on it especially in operation. Keep them coming👍🏼 might have to buy one some day
@@kalenlaymon8161 I’ll definitely be having more videos on the chipper at work hopefully she will be running at the end of next month
That sucks that your fuel tank cracked 😞
Yaa ruined my day
가격이 얼마인가요?
300k us