[DIY] Powerful Amplifier Board using 2SC5200 & 2SA1943 Transistors - NEW SOCL 504 TEF |

Поділитися
Вставка
  • Опубліковано 13 гру 2024

КОМЕНТАРІ • 525

  • @cbzproject
    @cbzproject  2 роки тому +4

    Build a High Power Amplifier - MICRO BOOSTRAP with XTI-2000 BOX:
    ua-cam.com/video/ZoBxzzhOQSQ/v-deo.html

  • @djambush360
    @djambush360 2 роки тому +16

    2:50 You should bend the wires at least 45° before cutting them. This makes the soldering point more resistant to slack joints, especially if you are building portable devices.

  • @janganditonton_cuk
    @janganditonton_cuk 2 роки тому +2

    makin keren aja nih channel..dari awal hingga sekaranh sudah bener2 "pro'

    • @kucingarab_7659
      @kucingarab_7659 2 роки тому

      bener bang . saya kira channel luar . ternyata orang indo 😅😅😅

    • @rifanhidayat8806
      @rifanhidayat8806 2 роки тому

      Pengen deh beli produk.nya..🤤🤤🤤

  • @hilal.1197
    @hilal.1197 2 роки тому +2

    dj from Indonesia, thanks for using it

  • @rameshwarmeena5804
    @rameshwarmeena5804 2 роки тому

    जबरदस्त क्वालिटी है भाई

  • @Analoque444
    @Analoque444 2 роки тому +7

    Nice but why you took one mono input into your mixer and put left and right chinch into it instead two seperate inputs, you lost the stereo output and get the same signal for both speakers instead of two different signals.

  • @Cuplex1
    @Cuplex1 2 роки тому +4

    I which you could include more information, like type of amplifier, result in the form of a spectrum analysis of frequency response. Meaning an overview of distortions, output. I assume it's a stereo amplifier, but you never display the speakers or even the output cables. A power meter would be nice to include as well if you have adequate speakers to be able to use at lest half of the stated power. Which I assume is not measured in RMS watts?

  • @kofikwakyeagyekum6487
    @kofikwakyeagyekum6487 2 роки тому +8

    Very clean and beautiful amplifier build, I wish I can get all these parts set like this and build more of this🤒🤔🤭

  • @franzolielectronics
    @franzolielectronics 2 роки тому +2

    Incredible design!

  • @apg-audiostuff3456
    @apg-audiostuff3456 2 роки тому +2

    You should do some tests at 5W to show distortion or signal quality with square wave, etc. Power limit measurements would be even more useful but quite difficult at this power range.

  • @AdiMughal4u
    @AdiMughal4u 2 роки тому +6

    That is awesome, can you share garber file of both pcb?

  • @princedecena9723
    @princedecena9723 2 роки тому +2

    Watching from Philippines broo ilove your project

  • @DHEFIN_ALFARIZQI
    @DHEFIN_ALFARIZQI 2 роки тому +1

    Joss kang, semangat berkarya

  • @นราธิปน่าชม-ฉ1ณ

    ประกอบเร็วทันใจชอบครับ.สวยดัวย

  • @rafcomtech
    @rafcomtech Рік тому +1

    Hallo boss, boleh minta script link pcbnya yg support dg JLC PCB ???
    Atau pembelian link set pcbnya 🙏🙏🙏

  • @adytiamusickaraoke3682
    @adytiamusickaraoke3682 2 роки тому

    salam dari pangkep,supeerrrrrr mantafff👍👍👍👍👍👍

  • @DJRAVISISODIYA
    @DJRAVISISODIYA 2 роки тому +4

    Your work is so clean and clear 🙏🙏🙏

  • @jokonantang5880
    @jokonantang5880 2 роки тому +1

    Watching from indonesia

  • @febriyannatanael3082
    @febriyannatanael3082 2 роки тому

    Makasar-Indonesia 👏

  • @jeanyves5380
    @jeanyves5380 2 роки тому +3

    Hi, this is AB class i suppose: many losses at high power. 🤨
    I'm designing a class D one with mosfets.
    It contains many protections.
    I'll test my first prototype soon.

  • @samuelmorales2612
    @samuelmorales2612 2 роки тому +2

    Saludos Amigo es un trabajo muy excelente hay que tener mucha mentalidad y paciencia 🙏 que Dios 👍 lo cuide a ud.y su familia 👪 gracias por compartir esa experiencia y compartí sus videos

  • @end.corruption
    @end.corruption 2 роки тому +1

    Work is too good 👌🏻

  • @AHMADWIMELASTYO
    @AHMADWIMELASTYO 2 роки тому +1

    Kalo pendapat saya ini kaya suara power amplifier kelas D. Hanya cocok untuk midl dan high

  • @boyfara6594
    @boyfara6594 2 роки тому

    logonya sepeeti pulau sulawesi👍👍

  • @AmplifierBoards-c2q
    @AmplifierBoards-c2q 9 місяців тому

    your cbz store so nice

  • @aryonllewellyn
    @aryonllewellyn 2 роки тому +3

    WOW! Amazing Kit. I only wish I could purchase the parts to make the amplifier myself. AWESOME!! 😁

  • @ANTOLEPEK
    @ANTOLEPEK Рік тому

    Kerja yang rapi saya suka rakitan rangkaian anda

  • @kerja_nyata927
    @kerja_nyata927 2 роки тому

    Made in Makasar indonesia👍👍👍

  • @deosargaf3385
    @deosargaf3385 2 роки тому +4

    steady boss keep working and provide electronic knowledge which is very useful for lovers of the electronics world.. always be healthy. greetings...

  • @djsahil6279
    @djsahil6279 2 роки тому +1

    smps ka bhi price

  • @carlfranz6805
    @carlfranz6805 2 роки тому

    Gosh. If only I could populate a board that fast. Sigh. 😉😤👍

  • @djsahil6279
    @djsahil6279 2 роки тому +1

    complit board milta h or kitne watt ka h

  • @cbzproject
    @cbzproject  2 роки тому +8

    Build a High Power Amplifier using Toroidal Transformer👇
    ua-cam.com/video/tzFFTJqWpew/v-deo.html

  • @wijayacanel4062
    @wijayacanel4062 Рік тому

    mantap power amplifir nya👍

  • @blftvindonesia9180
    @blftvindonesia9180 2 роки тому

    Rapi... Bagus tutorianya bisa buat mutifasi...

  • @Masemman
    @Masemman 2 роки тому +1

    Layout perkutut dong bos . Atau blameless basshaker pasti lebih joss

  • @arvindkumarkumar999
    @arvindkumarkumar999 2 роки тому +1

    Bhai jitana saman lagaye ho pura kamplit hame chahiye

  • @anandrajbhar3435
    @anandrajbhar3435 2 роки тому +1

    Please add (attached) your Gerber files of all project,We get to learn something by watching your video.

  • @ralffrank9954
    @ralffrank9954 2 роки тому +1

    Hey, nice work! Can you please tell me were to get the 20A +/-65V SMPS ??? Thank you!!!

  • @avalonrousseau3234
    @avalonrousseau3234 2 роки тому +1

    can you make this one in active module design?

  • @RixtronixLAB
    @RixtronixLAB Рік тому

    Nice video, well done,thank you for sharing it with us :)

  • @azharulhoquetopu
    @azharulhoquetopu Рік тому +1

    Can I get the gerber file of all circuits?

  • @jonaldmaque
    @jonaldmaque 2 роки тому +5

    shotout boss watching from riyadh k s a but im from philippines

  • @janithprabodha9125
    @janithprabodha9125 Рік тому +1

    Could you please share the gerber files with us? Thank you

  • @yahahahayyuk6785
    @yahahahayyuk6785 Рік тому

    ada peta sulawesinya😁,salam dari napu,kab poso bang🙏

  • @bablaghosh5476
    @bablaghosh5476 2 роки тому +1

    Excellent job brother

  • @PachaTip
    @PachaTip 2 роки тому +1

    Beautiful 👍👍👍👍❤️❤️❤️❤️

  • @danishdart
    @danishdart 2 роки тому

    Beautiful!

  • @orlandojazm3534
    @orlandojazm3534 2 роки тому

    😯🤔😲 Luce bien su equipo lo debería de instalar en una caja de plexiglás para que se vea más original

  • @nurdinnurdin6712
    @nurdinnurdin6712 2 роки тому

    Pertahankan kwalitas bosku..

  • @AR_Rathor
    @AR_Rathor 2 роки тому +1

    Pura kitane rupay me ban jata h

  • @ferdycrow2958
    @ferdycrow2958 2 роки тому

    Mantabb mentongg 👍👍👍👍👍

  • @internationalmasterspeaker1879
    @internationalmasterspeaker1879 2 роки тому

    Wow very nice idol

  • @josenoenavarro109
    @josenoenavarro109 2 роки тому +3

    I enjoyed your work thank you for sharing with us

  • @S.T438
    @S.T438 2 роки тому +1

    Solata West Sulawesi Barat 🎶

  • @dlfavilla
    @dlfavilla 2 роки тому +4

    It´s a masterpiece!!

  • @YNElektronik
    @YNElektronik 2 роки тому

    hadir bro selalu menyimak👍

  • @bagusdwiprasetyo4499
    @bagusdwiprasetyo4499 2 роки тому

    kaki elco yg dipcb final terhubung ke.colector dan ground mas ?

  • @kofikwakyeagyekum6487
    @kofikwakyeagyekum6487 2 роки тому

    Very beautiful amp

  • @Su67377s
    @Su67377s Рік тому

    Please explain ckt. And complete audio system

  • @ddosmax293
    @ddosmax293 2 роки тому

    Very nice!👏👏👏👏

  • @sunarjosunarjo3264
    @sunarjosunarjo3264 2 роки тому +1

    Drever untuk angkat 4sepiker 18" 2000wat harga berapa bos

  • @persitipersiti621
    @persitipersiti621 2 роки тому +1

    Mantap mas👍👍👍

  • @SC.243k
    @SC.243k 2 роки тому +2

    Very professional work, Thanks my friend ♥️♥️♥️♥️♥️♥️

  • @giulianosteifn
    @giulianosteifn Рік тому

    Hi! how you set the DCO ?! Thanks!

  • @khuyenchau5753
    @khuyenchau5753 2 роки тому

    I really like this circuit

  • @WandyMH44
    @WandyMH44 2 роки тому

    kurang suara midle nya buat ceksound nya mas.apa cuma pake speaker wofer mas ??🙏

  • @roldydavid9371
    @roldydavid9371 2 роки тому

    I saw Celebes island on your PCB and marked with South Sulawesi and Solata, may I guess you came from Tana Toraja??? What a great video Bro.... Mantap tongan te videmu sola... Salam dari Mamasa, Sulawesi Barat

    • @cbzproject
      @cbzproject  2 роки тому

      I'm not from there. But Toraja is where my parents come from

  • @siesati6703
    @siesati6703 Рік тому

    Hi, friend!
    Where can you buy the switching power supply?

  • @SannyMobileSoundChannel
    @SannyMobileSoundChannel Рік тому

    Ganda ng project mo boss

  • @bimleshkumarsharma9513
    @bimleshkumarsharma9513 2 роки тому +1

    How to make big mixer....,, Dj live program...

  • @Rendraco79
    @Rendraco79 Рік тому

    hi @Cbz. excellent video as usual.
    where do I get the pcb's from your designs to make this amazing amplifiers? i will apreciate it.
    Greetings from Colombia!

  • @ldsman1global587
    @ldsman1global587 2 роки тому +1

    This guy planned and built 6 total different amplifiers in 2 month?! Every project completed from start to end in every 10 days?! It is weird....

  • @muzakkichannel6725
    @muzakkichannel6725 2 роки тому

    Can you make fortissimo-100 high end amp? Assembly + test?

  • @gondolnyohik8600
    @gondolnyohik8600 7 місяців тому

    Kak.. ini ground CTnya iku mana? Apakah ikut input extra volt 15dc

  • @Piccodon
    @Piccodon 2 роки тому

    If you "need" 1 kW of sound power you have some problem:
    Deafness.
    Low efficiency speakers.
    You are oblivious to your neighbors or hate them.
    You want to get tinnitus and destroy your hearing.
    Amp is driving a motor or a small vibration test machine

  • @georgeattafuah2280
    @georgeattafuah2280 Рік тому

    Hi I'm in ghana so how will I get the equipment because I want to learn

  • @jk-jf9hb
    @jk-jf9hb 2 роки тому +1

    Nice !!!👍❤️

  • @raihanislam3502
    @raihanislam3502 2 роки тому +1

    Vai upni ca20 amplifier making kora dhakau

  • @raffiqid1074
    @raffiqid1074 2 роки тому

    Semangat bikin kontenya banh

  • @deicoraudio
    @deicoraudio 2 роки тому

    Hello friend, I greet you from Colombia. I would like to know what connection the capacitors have, which go in the output transistors. 2sc5200 and 2sa1943. Blessings

    • @stewstube70
      @stewstube70 Рік тому

      I'm guessing they go from the DC rail to ground, acting as local decouplers. It will help on a long narrow board like this to help the farthest transistor pairs have a local low impedance current source.

  • @awaazmatroko5972
    @awaazmatroko5972 Рік тому

    i like watching your videos, its clear, iam from india, i want to build power amplifier due to buget contrain , your driver beside speaker protection, does it have thermal, short, overload, etc protection?

  • @masterchaoslord
    @masterchaoslord 2 роки тому

    Do you have the projects avialable? (pcb's and schematics). Thanks

  • @narkoaudio
    @narkoaudio Рік тому

    coba sekali kali merangkai power class H ,bos . jangan power class AB terus . terimakasih

  • @skabdulmtr2000
    @skabdulmtr2000 2 роки тому

    Sir in this bord not seeing adio in out put how much speakers use sab woofer when put show me sir

  • @shakeelmohammed6187
    @shakeelmohammed6187 Рік тому

    Hello sir ❤️
    I'm from India how to buy this amplifier pls reply 🙏

  • @awaazmatroko5972
    @awaazmatroko5972 9 місяців тому

    I like your videos, but pls is there pcb geber file

  • @lelakijangkis8056
    @lelakijangkis8056 2 роки тому

    Dodolan di shopee ora masseehh

  • @iyamhendrawan6921
    @iyamhendrawan6921 2 роки тому

    Karya yang bagus 👍👍👍

  • @HemlalDhiwar-wr2uf
    @HemlalDhiwar-wr2uf Рік тому

    Very nice but price kya hai sab ka

  • @studypoint7607
    @studypoint7607 2 роки тому +1

    hello sir
    how can i buy this product....
    can you tell me?

  • @hondastill4656
    @hondastill4656 2 роки тому

    keren bang👏

  • @Aleynikov
    @Aleynikov Рік тому

    where possible to buy power supply?

  • @stephensospeter2371
    @stephensospeter2371 Рік тому

    Hello ther nice work, how can i get the files so that i can order, am new to this thought i could make one for myself

  • @junaedyanakoda4661
    @junaedyanakoda4661 2 роки тому

    info dong utk pembelian spare part nya bang .🙏🙏🙏

  • @webersouza3046
    @webersouza3046 Рік тому +1

    Fantástico 👏👏👏👏

  • @rocketzclember5010
    @rocketzclember5010 2 роки тому

    Request brow ....Elko 10,0000uf 100v yang original

  • @maswid4987
    @maswid4987 2 роки тому

    jooooz...top top top ! i like this chanel

  • @drsamuelk
    @drsamuelk 2 роки тому

    Its a "SOUND TRACTOR". I wish I could buy one.

  • @arvindkumarkumar999
    @arvindkumarkumar999 2 роки тому +1

    Bhai video me jitna saman dikhaye ho hame chahiye