hey.. i work on this acc to ur diagram and copy same code but there is a problem tht traffic light is working properly but sensors are nt working... plz help day after tomorrow is last date of submiision nd i hve to complete it by tomorrow
hello, what kind of system can I install if I want to measure the traffic density on a winding road. i want something low cost and functional. it should be a system that can transmit this density to another device and show the density. i would be very grateful if you could help me. is lidar sensor used? which one do you think is advantageous?
Sir is circuit diagram and code correct bcz i m facing one problem with sensors they are detecting object but not giving signal to arduino to turn on the led of that side pls help urgent three sides are working a,b,c but d not working
bro i have to make a project using 3 different sensors so please tell me which will be the best topic;such that project should be based on real life example.
Hello, can anybody help me with the changes that have to be made in the code, if we are using readymade IR sensor module instead of separate emitter and receiver? Also according to the circuit diagram, the sensors at A6 and A7 are not grounded? Is that correct?
Sir, I tried this project but when I put equal density on all ir sensors the project did not run on priority based but with no density it runs on priority based. Why the priority is not following with equal density on all ir sensors? Kindly help.
Hello, i would like to design the same project as my school project but i don't have a lot of hardware knowledge, like putting those components together and more though i have the programming skill. So can you help illustrate how you put the components together and how many IR Transmitter Sensors and IR Receiver Sensors do i need for this?
the image given along with this video does not help us to recognize the A, B, C and D IR sensors. So kindly request you to update the circuit diagram by marking this.
First, open the Arduino IDE(soft) and go to Tools option and select your board like (Arduino UNO/ Arduino Nano) then select the port like (COM3/COM5 etc).
@@RazibShahadat a1 means the IR sensor beside the traffic signal in the road A and a2 means the IR sensor far from the traffic signal in the same road????
@@RazibShahadat Sir, did you simply use IR sensor or did you use PIR sensor in the project? Because in TinkerCad, IR sensor doesn't work upon simulation while PIR works on simulation
i want to make same project with 3 ir sensor on each road (4 way traffic signal). Kindly tell that, can we build by using arduino uno with reason please
There is compiling error showing in the program......compile error:stray '\302' in the program......so kindly help........ Also I want to know abt the serial.print('\t'); What is "t" in this case....u have not assign this
@@RazibShahadat can u please show the circuit that you have joined with a little clarity. i want to make but I don't know how you have joined the wires. i am very new
Please sir make video on explaining how you made this project from beginning
hey.. i work on this acc to ur diagram and copy same code but there is a problem tht traffic light is working properly but sensors are nt working... plz help day after tomorrow is last date of submiision nd i hve to complete it by tomorrow
God bless you sir, you are excellent!!!❤
hello, what kind of system can I install if I want to measure the traffic density on a winding road. i want something low cost and functional. it should be a system that can transmit this density to another device and show the density. i would be very grateful if you could help me. is lidar sensor used? which one do you think is advantageous?
Sir is circuit diagram and code correct bcz i m facing one problem with sensors they are detecting object but not giving signal to arduino to turn on the led of that side pls help urgent three sides are working a,b,c but d not working
bro i have to make a project using 3 different sensors so please tell me which will be the best topic;such that project should be based on real life example.
Hello, can anybody help me with the changes that have to be made in the code, if we are using readymade IR sensor module instead of separate emitter and receiver? Also according to the circuit diagram, the sensors at A6 and A7 are not grounded? Is that correct?
Can i use ir transmitter and reciever midule
sir can u make the video on the explanation of the source code
Nice work
how do you combine IR receiver and transmitter into one module. coz i happen to have them separately
Can u explain me about supply.......pins to which the out put of transformer should be give
Plzzz help me to do this project... Plzzz
hi sir..can i use IR obstacle with digital output?
can you help me with how you analyzed your data for the final documentation
what is the algorithm you have used sir?
BTW what is a1,a2,b1,b2,c1,c2,d1,d2 in the proteus diagram???
Sir, I tried this project but when I put equal density on all ir sensors the project did not run on priority based but with no density it runs on priority based. Why the priority is not following with equal density on all ir sensors? Kindly help.
because of once sensor detect someting then signal of that road open
hello,= bro, I want to make same project but instead of ir sensor i want sound sensor can you make code for that
Hello, i would like to design the same project as my school project but i don't have a lot of hardware knowledge, like putting those components together and more though i have the programming skill.
So can you help illustrate how you put the components together and how many IR Transmitter Sensors and IR Receiver Sensors do i need for this?
i use IR obstacle sensor which is it include transmitter and receiver
3rd condition is not working so what to do in this case.
Good morning sir, I use arduino mega 2560 to run the code but its not displaying as you showed in the video, pls how I get the details of the work
Thanks for given code and circuit diagram
can a highschool student handle doing this for a project?
Did you use IR sensor module in this project
No. IR TX Rx.
Thank you very much sir🤩🙏
thanx brother I was waiting this project 😊😊 but where is code and systematic
Please check the video description.
Razib Shahadat thanx
Bro can u send the code for this project
sir would u do not mind to say where we can get this combine ir sensor and its name sir
Is there no alternative than vero board
sir can you send link for this software plzz..
excellent!
Ldr doesn't work with black colour
How you activated pins A6 and A7 plz I had a problem in this
You can only read the analog value using A6 and A7 pins.
Can i use arduino mega instead of nano
Yes you can
Hello sir I want to purchase this project with circuit diagram, program code, and with some changes.What it will cost ?
Sir can you please tell how much components required in detail
Thanks, it works fine with little corrections with sensor pins.
I tried too but mine is not working well. Can you please tell me the modifications you make in this code ?
Tell me what corrections plz tell me 😭
What changes have u made pls tell urgent
Plz tell the corrections
Can you please tell what corrections have to be made?
Sir please make a video for a emergency vehicles traffic light
Hello sir, If i change the Ir transmitter and receiver to IR obstacle it is okay?
What does the sensor output? digital or analog, if the answer is analog the code will be work. if the output is digital you need to change the code.
Analog.. thanks sir 👍🏻
@@RazibShahadat sir, it is not compatible to arduino uno? or just nano ?
@@RazibShahadat How will I change the code when I am using digital output?
Can I use bread board
Can we use arduino uno instead of arduino nano?
Arduino uno hasn't enough pin for that.
If you don't mind I would like to buy your project
full circuit send karo please circuit diagram me risitor nahi he 10k resisitor
circuit is not working ...
God bless u sir....
Thanks a lot💜
Pls provide the complete details of materials,their model and rate..
the image given along with this video does not help us to recognize the A, B, C and D IR sensors. So kindly request you to update the circuit diagram by marking this.
U have used capacitor in the model but mentioned in circuit diagram
Sir lf i connect only 4 ir then I should do changes in source code
If you use the 4 IR sensor then you need to change the code.
@@RazibShahadat what will be the changes
@@RazibShahadat sir please tell me what will be the changes in the source code
Hey smit...i need.your help for this project...please can you help??
can i use uno instead of nano??
No, you can't use Arduino Uno. This project needs 8 analog pin but Arduino Uno has 6 analog pin.
I used UNO but I had to then work with three IR sensor instead of 8
sir how to select port in the tool ..i can't do it plzz tell me sir
First, open the Arduino IDE(soft) and go to Tools option and select your board like (Arduino UNO/ Arduino Nano) then select the port like (COM3/COM5 etc).
Sir I need this circuit diagram and how to connect sensor wires
ua-cam.com/video/CFMzBt3ta4o/v-deo.html
why we need 2 sensor IR in each road and what the distance can be between them in the reality?
We need two IR sensor to measure the traffic density on each road.
@@RazibShahadat a1 means the IR sensor beside the traffic signal in the road A and a2 means the IR sensor far from the traffic signal in the same road????
@@amalaitmouddar7983Yes you are right.
@@RazibShahadat Tnx, can you give your facebook or email.... to contact you?
@@RazibShahadat what you mean by the traffic status is normal??
why ir sensors not working??
Sir my Arduino nano board is not detecting
Hello sir i want this project details, means how to set up all this, plz help me its urgent
Circuit diagram, component list, and source code of the project are given in the video description.
Sir, do we need arduino nano usb cable?
Yes, you need an arduino nano cable for uploading the code.
@@RazibShahadat thank you sir
plz tell me full detail of the circuit
I want to do this project
what use of 10k & 100ohm resistor
Bro can u paste it again in your drive ( source code)
Can we use Arduino Uno instead of Arduino Nano??
No, you can't use Arduino Uno. This project needs 8 analog pin but Arduino Uno has 6 analog pin.
Sir, do we need ir module or individual ir receiver and ir transmitter?
Its your choice, if you use IR module then you need to change the code. In this project i am using individual IR transmitter and receiver.
@@RazibShahadat Sir, did you simply use IR sensor or did you use PIR sensor in the project?
Because in TinkerCad, IR sensor doesn't work upon simulation while PIR works on simulation
Sir, full details project please
Can u please give me its proteus file or tinkercad please
Sir, Can i make this project by using Arduino Uno?
No, you can't make it using Arduino Uno.
@@RazibShahadat but why sir, kindly tell reason
i want to make same project with 3 ir sensor on each road (4 way traffic signal). Kindly tell that, can we build by using arduino uno with reason please
@@RazibShahadat sir plz tell me.
@@sanaullahkayani6481 because arduino uno have not enough pins.
thanks a lot
You are welcome.
I need help
Bro the source code is not downloading bro ,it was deleted in ur drive
Sir where is the external power supply in circuit diagram?
I believe it is powered from Arduino's own power supply
The code is not opening
sir,kindly send the code and circuit diagram
Code link is not open
Just download the code and unzip the file.
Sir code is not available this link
Piz send the code
The code is available in the video description.
@@RazibShahadat
But me link open ki par code Nahi open hi ho raha
Code is not opening... Please help...
Can we add 7 segment display and show how much time the vehicles should wait.?..
There is compiling error showing in the program......compile error:stray '\302' in the program......so kindly help........
Also I want to know abt the
serial.print('\t');
What is "t" in this case....u have not assign this
Sir please give me code and circuit diagram
Please see the video description.
Sir code is not available
Please check the video description.
I need the source code
Check the video description.
I am ready to pay 10k rupees. will u give me?
I am from Bangladesh.
@@RazibShahadat can u please show the circuit that you have joined with a little clarity. i want to make but I don't know how you have joined the wires. i am very new
@@RazibShahadat plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz