@@JasonWW2000 The ports definitely sealed off from the cabin. Just bc you haven’t put sealer on it dosent mean it’s not sealed off Why in the world would you fit the port anywhere other than into the cabin Don’t make sense
@@ShadeTreeSplI don't think you looked at the rear deck. He has 3 large holes in the rear deck to let the bass through. I believe he is loosing pressure and energy by running the ports into the trunk instead of pointing then up and through the rear deck. That would be more efficient. Put all the pressure into the cabin. I think he ran it into the trunk just to be different. It definitely works, it's just loosing some efficiency.
@@JasonWW2000 Different isn’t always better I caught the holes And all the sheet metal and SPL reducing obstructions. I’ve floated bags out of a sealed trunk on a single 12 I get how it works How’s this He’s separating the port from the cabin since you take issue with sealed It’s almost like he didn’t want potential
Uuuuuuuuuuhhhhhhhwwwwwweeeeeeeeeee I love me some DD subs but I can’t afford em😂😭🤣😂😭I can definitely buy them but I can’t afford them understand the difference🤷🏾♂️🤷🏾
That is incorrect sir. The part that gets hot is the voice coil. There is no glue on it. It is coated in a high temperature epoxy. When this epoxy gets hot it first starts to outgas. It's a normal chemical change that fully cures the epoxy. Most subs outgas when heated and then it goes away now requiring even hotter temperatures before it outgasses again. Experienced users know the coils are getting dangerously hot when they smell them and they turn the power down to help them cool off. Like with anything, if you don't know how hard to push it, you can accidentally go too far. Some people don't reduce power when they smell the coils and then it can overheat. The epoxy lets loose and the coils unwind.
@@JasonWW2000 Epoxy is a form of glue. You melt and outgas the epoxy enough it will fail. Tell me more about how overheated voice coils don't utterly and mechanically fail when exposed to enough heat that you can smell the glue.
If y’all need a battery like this hit me up J&C Lithium I can get you taken care of this is one of my good customers and his setup is banging with his voltage stronger than anything you have ever seen…
Hands down clean and nice setup up but to much amp for just to subs a 10k or 12k would be plenty enough and they want last being on 17k and a half ohm killing them for sure.
This was 1 of the best setups there and IT WAS SLAPPING!! Great job with this build!
Thanks man
the wait for the bass drop was worth it 😮😮😮
I wonder if it would be louder/more windy if you ported through the rear deck into the cabin. Awesome unique build either way
It’s windy and I can do hair trick…
Yes, if the ports were fired up through the rear deck and the truck was sealed off separate all the pressure would be focused in the cabin.
That shit was bumpin
That’s was a dope DD setup! 🔊🔥
That's an awesome build
Now that is a badass setup nice job Mr. Nelson
17K at .5 those DDs gotta be taking 10k+ each.
Deff just a bass machine! Very different and unique! Love it!👏👏👏
Next time that hood sticks closed, just pull the release lever and crank the bass, that ought to blow it open! Nice job man.
Topnotch setup. Smashing them lowsss💪✌️🤜
Love the set up it’s unlike anything I’ve ever seen before you got style and functionality
Awesome video jacob. Very unique system. I like seeing something different than everyone else
Sick build !
9900s should handle anything you throw at them especially with that price tag you get what you pay for
My single dd18 sc setup is almost identical to this.. but I'm in a crx.. couldn't fit 2..
Awesome audio setup nice
Damn I wanted to see the trunk flex!🤷🏽♂️🤦🏽♂️
Toujours a faire des grimasse y a pas a on faire si on aime sa fait toujourrs plaisir😂
Very impressive job on the box, an great job on the install. I really like the lay-out . Nice style bro.
My homie did his thing
Nice bro 👌
Respect the originality ‼️💯 thats how I am
I love DD ❤
Superb❤
Sealed ports in the trunk…Def a new one
What do you mean by sealed? Nothing is sealed here.
@@JasonWW2000 The ports definitely sealed off from the cabin.
Just bc you haven’t put sealer on it dosent mean it’s not sealed off
Why in the world would you fit the port anywhere other than into the cabin
Don’t make sense
@@ShadeTreeSplI don't think you looked at the rear deck. He has 3 large holes in the rear deck to let the bass through.
I believe he is loosing pressure and energy by running the ports into the trunk instead of pointing then up and through the rear deck. That would be more efficient. Put all the pressure into the cabin.
I think he ran it into the trunk just to be different. It definitely works, it's just loosing some efficiency.
@@JasonWW2000 Different isn’t always better
I caught the holes
And all the sheet metal and SPL reducing obstructions.
I’ve floated bags out of a sealed trunk on a single 12
I get how it works
How’s this
He’s separating the port from the cabin since you take issue with sealed
It’s almost like he didn’t want potential
@@ShadeTreeSplI agree.
Supercharging doesn't add rms by the way.
Noted thanks man
Nice
Uuuuuuuuuuhhhhhhhwwwwwweeeeeeeeeee I love me some DD subs but I can’t afford em😂😭🤣😂😭I can definitely buy them but I can’t afford them understand the difference🤷🏾♂️🤷🏾
That lil boy know his shit
smelly subs = melting glue = R.I.P.
That is incorrect sir. The part that gets hot is the voice coil. There is no glue on it. It is coated in a high temperature epoxy. When this epoxy gets hot it first starts to outgas. It's a normal chemical change that fully cures the epoxy. Most subs outgas when heated and then it goes away now requiring even hotter temperatures before it outgasses again. Experienced users know the coils are getting dangerously hot when they smell them and they turn the power down to help them cool off.
Like with anything, if you don't know how hard to push it, you can accidentally go too far. Some people don't reduce power when they smell the coils and then it can overheat. The epoxy lets loose and the coils unwind.
@@JasonWW2000 Epoxy is a form of glue. You melt and outgas the epoxy enough it will fail. Tell me more about how overheated voice coils don't utterly and mechanically fail when exposed to enough heat that you can smell the glue.
@@soldjahboyEpoxy and glue are two different things. Both chemically and mechanically.
@@JasonWW2000 An epoxy is considered a type of glue by most people. Stop being an obtuse wanker.
First song with just highs playing?
@JacobViral no I mean do you know what song it is
@@lilbondatrack6969 my phone picked up: rich flex dj double oh kevin
Sick setup
Flexxxxx bruvvvvv
If y’all need a battery like this hit me up J&C Lithium I can get you taken care of this is one of my good customers and his setup is banging with his voltage stronger than anything you have ever seen…
Fact’s definitely hit up J&C Lithium
Those subs are looking for way more power I would personally put 2JP 83s on each
Hands down clean and nice setup up but to much amp for just to subs a 10k or 12k would be plenty enough and they want last being on 17k and a half ohm killing them for sure.
I’ve had this setup for 3 years now… haven’t failed me yet…
@@juan_pressuregang2422 Getting hot and smelly and having to stop playing is absolutely a fail. DOH!
@@MotoAtheist actually I played it for the entire song it’s just edited…that’s why… every demo I’ve done that day was the entire song…
@@juan_pressuregang2422 So you have to stop and let everything cool off between songs? Yeah, total fail.
@@MotoAtheistYour showing your lack of experience.
Die zeitlupe nervt und nervt bei jedem video.
STOPPP SLLOOWWINNG DOWWNNN THEEE VVIIDDEEEOOOOSSSS!!!!!!!
Only slowdown during copyright issue parts