Thank you so much. I got my machine 2 days ago and could not figure out what was wrong. A couple issues, paper not cutting all the thru, I couldn't get it to read registration marks, a few others too. And it was all because my blade wasn't locked. You pointing out the indicator show it was locked just saved my sanity!
I love my first Silhouette and I know I'll love this one even more. There are just so many things you can create with them. I could go on and on about how much I love them! Haha!
Thanks for helping us! I figured it out after I had uploaded the video. A day late and a dollar shore, huh? :) The square part on the end is for the blue tooth. I left the info in my description if you're curious.
thanks very helpful, just got my came 3 while updating the firmware it got stuck for 5 hours . i switched off and nothing came up , only with holding the power button and pluging the wire which shows only light blue color. any help ?
I have Camio 3 Please have a problem while dragging the paper although using the installation tool the action goes right and north what solution does the problem the machine tried again and again I do not have English. Sorry if there is a mistake
Mine doesnt sound like yours. when i turn it on the blade makes a really loud sound stuck to the left then goes to the printing line. Did I NOT take off some packaging? I did it just as u did but every time I turn it on, it makes a loud noise. Advice?
No, but it can cut shrink film. After it's cut and you heat it to shrink, it becomes thick. This pin tutorial will show you more about it. Search "DIY pin tutorial using the Silhouette" on my blog and you can read more about it. The link to my blog is in the video description above.
Thank you so much. I got my machine 2 days ago and could not figure out what was wrong. A couple issues, paper not cutting all the thru, I couldn't get it to read registration marks, a few others too. And it was all because my blade wasn't locked. You pointing out the indicator show it was locked just saved my sanity!
I've never owned this machine or one like it and I just got one yesterday and I'm so glad I'm not the only one who hates how loud it is!! hahaha
I just received mine today and am so excited to get started
Thank for this! I would have had no idea where to start when putting everything together!
Thanks for sharing this. I am convinced even more now that I need this.
I love my first Silhouette and I know I'll love this one even more. There are just so many things you can create with them. I could go on and on about how much I love them! Haha!
its to adjust the blade and the other end is to open blade to clean it
Getting mine tomorrow!!!
i just bought mine . should be here in a few days....
This was so helpful. Thank you so much!
Good video Amy! :)
Thank you so much for this video!!!
Thanks for the video. It's crazy that it does not come with instructions.
Angelique Juarez right!
Thank you!
Good tutoring
thank you so much.. really big help...
the little tool is for the blade to unscrew the cap off
Thanks for helping us! I figured it out after I had uploaded the video. A day late and a dollar shore, huh? :) The square part on the end is for the blue tooth. I left the info in my description if you're curious.
Who needs instructions i found you!!!
from what I understand it does not have any more force than the original Silhouette Cameo?
Why not connection is not ready
I hear that is for the blue tooth.
Thanks! I don't know how they expected us to know that. Haha!
Hi Amy, do you still use this one or have you upgraded?! Also, is the Cricut similar software!? Wonder!
how did you move the roller mine wont buge
thanks very helpful, just got my came 3 while updating the firmware it got stuck for 5 hours . i switched off and nothing came up , only with holding the power button and pluging the wire which shows only light blue color. any help ?
I have this one and the bluetooth just won't work. So bummed.
I have Camio 3
Please have a problem while dragging the paper although using the installation tool the action goes right and north what solution does the problem the machine tried again and again
I do not have English. Sorry if there is a mistake
Anyone help me blade head is not sliding to left side it stucks on the right...please reply if you know !!
Second time I bought this machine, can't get it to work. Have a brother Scan n Cut, works fine. Thought I was upgrading. Guess not.
I'm having issues with mine as well. It won't even turn on. Guess I'll call Silhouette today.
How thick of paper does it cut?
Hi. Are you having problems with your cameo? I want to buy a machind, but having trouble to decide
How much is this?
all small equipments in that storage also come with cameo?
N4zirul 4zim no :(
wheres the software?
mine wont unlock even trying with 2 hands grrr
Do you happen to know what the difference is between the Cameo 2 and Cameo 3?
Sunshine Creations and Crafts do you know if I need the sketch pens or the pixscan mat?
Allison Flippin .
Price??
Yvonne M it depends where u get it but Walmart has is for like maybe 250.00$
its to remove the bluetooth device
Mine doesnt sound like yours. when i turn it on the blade makes a really loud sound stuck to the left then goes to the printing line. Did I NOT take off some packaging? I did it just as u did but every time I turn it on, it makes a loud noise. Advice?
Hi Can it cut 1/4 acrylic? Thanks
No, but it can cut shrink film. After it's cut and you heat it to shrink, it becomes thick. This pin tutorial will show you more about it. Search "DIY pin tutorial using the Silhouette" on my blog and you can read more about it. The link to my blog is in the video description above.
Thank you!
I also could not get the lock and unlock to turn. Any suggestions
the only thing wrong with this titorial is that she Did Not have nail polish on them sexy hands.AMAZING PRESENTATION .THANK YOU,.SO GOOD.