YES! Finally after watching half dozen other videos you show how to make sure the drawer attachment section of the slide is perfectly installed and level. THANK YOU!
Thank you, thank you, thank you. My drawer was sticking and I just had to get the drawer out to tighten the screws. You showed me how it went together without all the endless talking that only concusses me. Excellent! Carry on.
I'm installing drawers under a staircase in our finished basement. My project looks nothing like yours, but your video gave me some great ideas on what I can do. Thanks for sharing your project.
Thank you! I’ve never done this before. This is exactly the type of drawer space and drawer slides I got. The slides came with only a measurement diagram of how wide the slide is but zero installation instructions.I really want to do it right the first time. I really appreciate your video!
Thank you, assembly a cabinet for a customer and have to put the slides on all they give you is a damn paper template so it was really helpful thank you
thank you very much for showing what in reality i need to know & understand on how to install corrrectly a simple sliding drawer i was looking for hours and a bunch of clowns expossed what they believe is the easiest way to install one of these with no clue or whatsoever is happening in real life - and wasted my time misserably (sigh) your video is *key in eliminating all the crap these guys evidently misinterpreted regarding the implemention of a simple fixture into a sliding cabinet *by putting that piece of wood in between the sliding fixture and the bottom of the drawer or edge, have eliminated potential wasted time on youtube mostly crappy videos that only serve to waste time .. and as you know, time is gold thank you again for this precious video i'll be your fan from now on
That was good But you need to explain what the two rubber parts are I think one is a backstop at the end of the cabinet support - I cut this off by mistake!) The other is a release "spring@ which you have to squeeze to open the sliders Also are there are critical measurements at the front end of the cabinet walls and drawer sides?
i would like to make 2 drawers under my Camper van bed , as it is high i wiuld like to use the drawer as a step to make it closed with a wood on the top with a hinge. What wood i need to use .I got sliders capable to hold 250 kgs
Great video, however I was hoping you'd show how you get the part of channel attached to the drawer to ride-out of the encasing part of the channel so that it can be completely taken out of the enclosure.
Thanks for the video. My drawers are 2000mm long, drawers slides are 1900mm long. Do you think I can use the same technique for gradually pulling the drawer out and attaching fasteners one at a time or could the drawer run the risk of getting a slight vertical angle? I guess it depends on the surface you're working on eh and how flat / even it is...? Also what do you think of the technique of mounting the drawer slides underneath so that you can make the drawer wider?
Hi thanks for the helpful video. I need a custom single flatbed drawer that would be used for keeping tools while working at my workshop. But the problem I am having is I don’t have any side support where I can mount the slides. Only option I have is to mount the slide just underneath of the main cabinet and use the top side of flatbed to mount against the drawer. Weight on the flatbed drawer could be upto 25-30kg. Can the flatbed handle this weight when top-mounted like this? Thanks
YES! Finally after watching half dozen other videos you show how to make sure the drawer attachment section of the slide is perfectly installed and level. THANK YOU!
Best video on installing runners!! No garbage commentary - no crap views - just the facts...TOP MAN!!!
Thank you, thank you, thank you. My drawer was sticking and I just had to get the drawer out to tighten the screws. You showed me how it went together without all the endless talking that only concusses me.
Excellent! Carry on.
I'm installing drawers under a staircase in our finished basement. My project looks nothing like yours, but your video gave me some great ideas on what I can do. Thanks for sharing your project.
Best tutorial ever!!! Saved my 10000$
Thank you! I’ve never done this before. This is exactly the type of drawer space and drawer slides I got. The slides came with only a measurement diagram of how wide the slide is but zero installation instructions.I really want to do it right the first time. I really appreciate your video!
If I could thumb this up 10 times I would. Such an easy, no nonsense method. You made this easy. Just what I needed. Top man
Craig Harrison k
Step by step , you said , and you meant it , great job thanks a million .
Thank you, assembly a cabinet for a customer and have to put the slides on all they give you is a damn paper template so it was really helpful thank you
I read about the reviews after I made my review. Looks like you help as many people as me! Great video. You're the drawer connecting Guy! 👏
Thank you. I’ve watched a few of these videos and you make it look the easiest. Cheers
Excellent tutorial. So clearly demonstrated, you make it look easy. You're a legend mate!
....
thank you very much for showing what in reality i need to know & understand on how to install corrrectly a simple sliding drawer
i was looking for hours and a bunch of clowns expossed what they believe is the easiest way to install one of these with no clue or whatsoever is happening in real life - and wasted my time misserably (sigh)
your video is *key in eliminating all the crap these guys evidently misinterpreted regarding the implemention of a simple fixture into a sliding cabinet
*by putting that piece of wood in between the sliding fixture and the bottom of the drawer or edge, have eliminated potential wasted time on youtube mostly crappy videos that only serve to waste time
.. and as you know, time is gold
thank you again for this precious video
i'll be your fan from now on
thank you very much i have another project and it include installing drawers
This is the perfect video lesson for me than you , straight to the point and easy 👍✨✨
Excellent! use of common sense, basics & simplicity.
finally after 3 constant hours i finally did it and it is lookin' amazing
Very useful tutorial. Got to know what i was searching for. Thanks.
Nice work mate and your video makes it so easy to understand and well demonstrated. Thank you
Great illustration. Thank you!
A thousand thanks to you .. Your presence provided the easiest way to install .. Thanks again 🌹🌹🌹👍👍👍
really good i have watched many but this conveys precisely the needed logic.
It is the best I have seen. And I have seen many. Thank you very much
Good job simply easy to learn 👍👍
I installed it as per this video..Thanks Sir.
nice idia 👍
well done brother
your videos are very good and have a wide message thank you
Great video. Thank you for the tutorial.
Ditto. Installing 10 roll out trays. Very helpful.
Love the tutorial...i actually used this to install drawers in the table i am building at home
Excellent! Great job!
Excellant brother I understand easily Good👌
Excellent video.
Plz show how we can remove drawer for cleaning purpose.
I love it, it's just so directive
Excellent! The pulls too good for the cabinet.
Nice video. 45 secs in I was like ... what's he doing that for, then my brain caught up. Great job.
Bellissimo tutorial . Semplice ma molto istruttivo e quindi di facile realizzazione .
The movies are great. The music just gets in the way...
Very helpful.Thanks!
am from Uganda
great 👍 work 👏
That was good
But you need to explain what the two rubber parts are
I think one is a backstop at the end of the cabinet support - I cut this off by mistake!)
The other is a release "spring@ which you have to squeeze to open the sliders
Also are there are critical measurements at the front end of the cabinet walls and drawer sides?
Thanks so much for sharing this technique 🙏🏽🙏🏽
Thank you...got fitted....the part which will be fitted in the keyboard -board should be removed and fit for the second
Yes. Simple, smart, the best! Thanks.
i would like to make 2 drawers under my Camper van bed , as it is high i wiuld like to use the drawer as a step to make it closed with a wood on the top with a hinge. What wood i need to use .I got sliders capable to hold 250 kgs
Very nice video. Simple, very informative, and no-nonsense. Plus, the music is a good touch too. Thank you very much.
Hi call
Awesome work
Everyone’s using a jig. Thank you for sharing. Not interested in basically buying stock in Kreg tools.
very nice and so easy to understand . thank you brother
Could i mount them from the bottom ? Or is there a type of rail system that I could use I'm trying to hack an IKEA unit to hold a 3d printer
Good illustration. A+.... 100% ... Welcome to the Wise Men's Hall Of Fame Brother
Dad's lifting up other dads💕🙌
Very nice! Simple, no wasted time, worked great. Nothing works like that for me - but it won't be your fault! As others have said, nice music too.
the video i been looking for thank u sir
Great video, however I was hoping you'd show how you get the part of channel attached to the drawer to ride-out of the encasing part of the channel so that it can be completely taken out of the enclosure.
thank you,, this the best way i have learned from u, 😊😊😊
Simple et bien fait .👍
Hey thanks 4 that amazing tutorial.Am grateful bcoz iv got to learn what has been disturbing me .cheers
Really good video
Great video amigo
Brilliant. Simple but brilliant.
Impressive technique!
Good work bro
Hello I would like to know where I can get this type of slide but with an exit of 1.5m
Nice work sir
Wow is it really that easy!! Always thought it was more complex!
very nice video
so straightforward and simple.
thank you 👍
Hi
My drawer box is 19”
Should I get 18” or 20” slides?
Thanks
It should be smaller than the drawer 18 is good
Is it possible to use these for a dyi pocket or sliding bathroom door
Great sir
Thanks for the video. My drawers are 2000mm long, drawers slides are 1900mm long. Do you think I can use the same technique for gradually pulling the drawer out and attaching fasteners one at a time or could the drawer run the risk of getting a slight vertical angle?
I guess it depends on the surface you're working on eh and how flat / even it is...?
Also what do you think of the technique of mounting the drawer slides underneath so that you can make the drawer wider?
Thankfully video
Thanks, you made this look easy.
Very useful, thanks!!!
Thanks bruv was setting up dressing table and this the only one that helped
Perfect tutorial
How to remove the extended arms on the drawer part? I bought the same roller but I don't know how to remove the 2 apart.
How do you remove the part that screws on to the drawer
There are two small handle one on each rail press them together and pull the drawer out
Excellent!! Thank you
Superb!
Thanks, good explanation
It's a good knowledgeable someone fron Bangalore
Thank you!!! Great tips
1 feet ki drawer k lie kitna size ka channel lage ga
thnks bro i visited your videos and i make the way you did
What is that thing attached to the back of your drill?
nice, thanks for sharing
Hi thanks for the helpful video. I need a custom single flatbed drawer that would be used for keeping tools while working at my workshop. But the problem I am having is I don’t have any side support where I can mount the slides. Only option I have is to mount the slide just underneath of the main cabinet and use the top side of flatbed to mount against the drawer. Weight on the flatbed drawer could be upto 25-30kg. Can the flatbed handle this weight when top-mounted like this? Thanks
Tapash Datta hi i think it will sometime we have to try new thing good luck with your project 👍🏻👍🏻😍😍
Nice job
Awesome sir! You are a legend. ...
on the drawer you can do the second hole further back through the gap they have provided
Excellent bro
Please tell me the name of the background music which you have used in this video.
Bravo 👏 👏 👏 👏
Thank You you made it look easy.
Who needs ikea after this lmao thank you sir!!!
nice video...
Hi there .
Nice work .
I need to fix my drawer .
If you could help me with it .
I stopped .cos afraid damage it .
Thank you again
Nicely done!!
Thanks for the video. That is a totally elegant and useful way to install slides.
Is it possible to mount these under the drawer?
Excelente ! How many millimeters is it the spacer ?? Thanks