Greetings sir! What to do when casting a transect is successful but there’s no transected lines? And when you try to use the calculate statistics, it says that there’s a problem with the Date_ field even though you input it correctly with the right format? Hope you could help me
Hi Mustafa, It depends on your shoreline area and the changes of your shorelines of different years. The baseline can be drawn off-shore, on-shore or can be a combination of both. By checking off-shore, rate calculations will be determined assuming transect origins are seaward of shorelines. The casting direction will be determined by the default parameters described on the previous page. Onshore transect origins are considered to be landward of the shorelines in rate calculations. If baselines are drawn both landward and seaward of the shorelines choose both. Two additional fields must exist in the baseline attribute table (see p.31) to specify the location of the specific baseline segment with respect to the land, and the appropriate casting direction to intersect the shorelines.This preference is not intended to be switched during a project and should only be set once. The chosen baseline parameter adjusts the reported statistics for positive and negative values to correctly indicate accretion and erosion. Please See: chrome-extension://gphandlahdpffmccakmbngmbjnjiiahp/cmgds.marine.usgs.gov/publications/DSAS/of2005-1304/images/pdf/DSASv3_2.pdf Thank you.
@@AanAkmalCH I've only use 10.5. Well, it already worked for me but another problem again. The transected lines were only for a small area of my baseline-shoreline =
I need to learn DSAS, I can pay some reasonable money too.. I want to learn, 1, Dsas 5.0 add on in Arc gis 2, Personal geo database creation and create shoreline and baseline file creation with all field and data types in attribute table. 3, proper Transects creation 4, Basic knowledge of LRR, EPR, NSM, SCE, LR2, LSE 5, Calculating all statistical results 6, Merging all results with Transects and creating profile for all 7, Beta shoreline prediction for next 20 years. And their statistical calculation.
How did you get the shorelines? Also, I want to see the changes in riverbank lines using this tool, so should I use two shorelines (For example I want to see the change from 1990 to 1995 ), so should I use these two years shoreline only?
I have followed your tutorial. Although I was able to create a transect layer,but it isn’t visible. So did happen to you at the initial steps. What can I do make my transect layer visible.
@@rahamatali6846 sir in my case my baseline is in onshore i correctly define it in my default parameters. But the transect doesn’t been visible while casting it
It is used for MATLAB Runtime. Please see the details: www.mathworks.com/matlabcentral/answers/94298-why-do-i-receive-an-error-regarding-missing-mclmcrrt7x-dll-when-i-run-my-stand-alone-application-com Thank you.
I have drawn baseline, shoreline but in "set default parameters" there is blank in shoreline layer, baseline layer. Can you please tell where is the problem?
Hello sir. I was not able to run for DSAS due to not detecting the baseline layer. The error note that : Optional field not found in baseline layer: Baseline.Group Can I know where I went wrong?
Al momento de procesar los transectos me sale error (C:\Users\Amine\AppData\Roaming\Corona Environmental Consulting\DSAS v4.4 add-in\DSAS_log.txt) como podria solucionar ese error
Izin bertanya kak, waktu aku set defauft parameter kok layer shorline dan basedline ndk muncul ya ? apakah yang bermasalah, mohon bantuan dan solusinya ? Terimakasih
hai sir, let me ask. why is it that every time i open the arcgis application that i have installed dsas v5, is says “problem while initialising log file. DSAS will be disabled…” i’ve installed it by adjusting my laptop windows bersion and my arcgis version to the DSAS version. thanks before 🙏🏻
Hello, have extracted shorelines through automatic methods, but I am unable to create a baseline as the lines are not continuous, they are broken, how can make them continuous and create a buffer? kindly
An unexpected error occurred. Please refer to the log file (C:\Users\Amine\AppData\Roaming\Corona Environmental Consulting\DSAS v4.4 add-in\DSAS_log.txt) for additional details after closing ArcMap. I am asking for a friend, how to fix this error
Hello, I have question. The error note is "unable to find database table for baseline layer 'baseline'" . But my file is already in personal geodatabase. Can you please tell where is the problem?
Hai sir, I can't create Transects actual it can be created but not visible and also the attribute table empty. what can I do for solving it? Can plz give a replay
Hello everyone, I work with the digital shoreline analysis system (DSAS of USGS) to my thesis, in the process i have a error with the calculate change statistics. The program say: "Unable to find output file 'C:\Users\...DSASCore.out.xml' Does anyone know what the solution is? Thanks!
Sir good evening, can you help us with this? 6. Please check the previous version of DSASAddin to avoid error C:\Users\user\AppData\Roaming\Corona Environmental Consulting I dont know which one should I fix or remove on the log
@@rahamatali6846 i am facing the same error. Should I delete all text present in the log file? and all the text of the xlm file? Please give me more details on how to resolve this error. I would be very grateful!
ভাই, আসসালামু আলাইকুম। আমি আপনার টিউটোরিয়াল অনুযায়ী DSASv5 ব্যবহার করে সবগুলা রেজাল্ট বের করেছি। কিন্তু, আমি আসলে Attribute table থেকে ডাটা নিয়ে কিভাবে আমার থিসিস পেপারে সেট করবো এটা নিয়ে কিছুটা সমস্যায় পড়েছি। আপনি যদি এই ব্যাপারে একটু হেল্প করতেন অনেক উপকৃত হতাম ভাই।
A mdb file and a txt file will be created to your workplace. You can use this file. Otherwise you can mark the attribute table, copy from the table and paste to excel file. Also you can create dbf file which can converted to excel or csv file.
An unexpected error occurred. Please refer to the log file(C:\Users\User\AppData\Roaming\Corona Environmental Consulting \ DSAS v5 add-in\ DSAS_log.txt) for additional details after closing ArcMap. How can i fix it? Plzzzz help...
Greetings sir! What to do when casting a transect is successful but there’s no transected lines? And when you try to use the calculate statistics, it says that there’s a problem with the Date_ field even though you input it correctly with the right format? Hope you could help me
MR. Ali there is an error when getting the transect. Therefore transe ct line is not visible in my workspace. May i know why it is please?
Linknya download nya tidak di sertakan, mantap sekali sangat bermanfaat
Hi Rahmat Ali, How do we draw the baseline? What is it referencing? do we draw randomly?
Hi Mustafa,
It depends on your shoreline area and the changes of your shorelines of different years.
The baseline can be drawn off-shore, on-shore or can be a combination of both. By checking off-shore, rate calculations will be determined assuming transect origins are seaward of shorelines. The casting direction will be determined by the default parameters described on the previous page. Onshore transect origins are considered to be landward of the shorelines in rate calculations. If baselines are drawn both landward and seaward of the shorelines choose both. Two additional fields must exist in the baseline attribute table (see p.31) to specify the location of the specific baseline segment with respect to the land, and the appropriate casting direction to intersect the shorelines.This preference is not intended to be switched during a project and should only be set once. The chosen baseline parameter adjusts the reported statistics for positive and negative values to correctly indicate accretion and erosion.
Please See:
chrome-extension://gphandlahdpffmccakmbngmbjnjiiahp/cmgds.marine.usgs.gov/publications/DSAS/of2005-1304/images/pdf/DSASv3_2.pdf
Thank you.
hi sir, i have created trancet, its pop up "transect created" but the transect did'nt show up at my shorline or baseline
Please did you solve that issue
Same problem here
Just downgrade ur arcgis to older version guys, i made it at arcgis 10.3
@@AanAkmalCH I've only use 10.5. Well, it already worked for me but another problem again. The transected lines were only for a small area of my baseline-shoreline =
I have faced same type of problem... When creating transect it's showing transect are created by actually it's no created... What i will do ?
Did you resolve this issue, please help me
@@anamikadas9946 please did you solve that problem I get the same. I cast transects but it doesn’t appeared
Well done & good effort my friend! it could be more interesting if you add voice in this video
Thanks
sir plz . canyou help for DSAS Error. less than two layres in map, cannot [Press Ctrl+C to copy this massage to the clipboard]
I need to learn DSAS, I can pay some reasonable money too..
I want to learn,
1, Dsas 5.0 add on in Arc gis
2, Personal geo database creation and create shoreline and baseline file creation with all field and data types in attribute table.
3, proper Transects creation
4, Basic knowledge of LRR, EPR, NSM, SCE, LR2, LSE
5, Calculating all statistical results
6, Merging all results with Transects and creating profile for all
7, Beta shoreline prediction for next 20 years. And their statistical calculation.
Thank you.
But I can help you without any cost.
These steps are very simple.
How can I help you.
Please send me an email.
Thank you again.
How did you get the shorelines?
Also, I want to see the changes in riverbank lines using this tool, so should I use two shorelines (For example I want to see the change from 1990 to 1995 ), so should I use these two years shoreline only?
Please digitize the shoreline from Georeferenced Image or Google Earth Pro. You can use 1990, 1992, 1995 to get better analysis
@@rahamatali6846 can we have a online meeting?
I am stuck with digitization, I mean I got something but the results are not promising
I have followed your tutorial. Although I was able to create a transect layer,but it isn’t visible. So did happen to you at the initial steps. What can I do make my transect layer visible.
Please define offshore and onshore correctly according to guideline.
@@rahamatali6846 sir in my case my baseline is in onshore i correctly define it in my default parameters. But the transect doesn’t been visible while casting it
same problem
help me to get out of this
Greetings, I have a question.
What is the use of the file you downloaded in the second step?
It is used for MATLAB Runtime.
Please see the details:
www.mathworks.com/matlabcentral/answers/94298-why-do-i-receive-an-error-regarding-missing-mclmcrrt7x-dll-when-i-run-my-stand-alone-application-com
Thank you.
@@rahamatali6846 Thank you for the time!
why mine still state there is mistake n please look at DSAS_log.txt ??
Could you provide the document with the instructions?
I have drawn baseline, shoreline but in "set default parameters" there is blank in shoreline layer, baseline layer. Can you please tell where is the problem?
Pleass check the attribute table. Is there any attributes.
Hello sir. I was not able to run for DSAS due to not detecting the baseline layer. The error note that :
Optional field not found in baseline layer: Baseline.Group
Can I know where I went wrong?
Please check the format of attribute table according to guideline.
@@rahamatali6846 same error sir ..
Al momento de procesar los transectos me sale error (C:\Users\Amine\AppData\Roaming\Corona Environmental Consulting\DSAS v4.4 add-in\DSAS_log.txt) como podria solucionar ese error
Izin bertanya kak, waktu aku set defauft parameter kok layer shorline dan basedline ndk muncul ya ? apakah yang bermasalah, mohon bantuan dan solusinya ? Terimakasih
what can i do sir please reply
hai sir, let me ask. why is it that every time i open the arcgis application that i have installed dsas v5, is says “problem while initialising log file. DSAS will be disabled…”
i’ve installed it by adjusting my laptop windows bersion and my arcgis version to the DSAS version.
thanks before
🙏🏻
did you get the ans. I'm also having the same problem
My Arcgis is cracked, i cant install the Addin
Hello, have extracted shorelines through automatic methods, but I am unable to create a baseline as the lines are not continuous, they are broken, how can make them continuous and create a buffer? kindly
Please Buffer the first year shoreline. Buffer linear unit depends on your shoreline length.
Hello can someone advice me if it is possible to install DSAS in windows 11 and if possible the steps
How did you get base line and shoreline ?
Shoreline has been delineated from google earth and satelite image and baseline is the buffer line of the shoreline.
@@rahamatali6846 thanks dear. Can I have your content detail?
@@himanshuchaube120 Yes please.
Please send me your mail id or whatsapp no
@@himanshuchaube120 rahamat117009.ra@gmail.com
An unexpected error occurred. Please refer to the log file (C:\Users\Amine\AppData\Roaming\Corona Environmental Consulting\DSAS v4.4 add-in\DSAS_log.txt) for additional details after closing ArcMap. I am asking for a friend, how to fix this error
Did you manage to resolve this error?
@@melvinleisner8661 yes
@@charliecalundre9868 Could you quickly tell me how you solved it? I didn't understand Rahamat Ali explanation
@@charliecalundre9868 Can you please share the details
Fix the date..
Use mm/dd/yyyy
When you use day 07 example. Only write it 7
Like 12/7/2022
Hello, I have question. The error note is "unable to find database table for baseline layer 'baseline'" . But my file is already in personal geodatabase. Can you please tell where is the problem?
Please check the attribute table (format, null value, or the date format as per guidelines) of the baseline.
@@rahamatali6846 i’m sorry actually the baseline attribute table is already correct like in your video , but it still get error note.
@@riskadayanti9541 Is your computers date format ddmmyyyy? Please send a screenshot of the database table. Also you can check your default location.
ArcHydrotools>Aputilities>set target loction>double click on default location> locate your database
@@rahamatali6846 Sir, is there any other way of solving the issue of baseline geodatabase table not found? All the solutions have been considered!
Greetings Sir,
I am able to generate transects but getting an error in calculating statistics ..kindly tell how to rectify it sir..
Is the attribute table of transects properly created. Please check the attribute table of the transects values.
Hai sir, I can't create Transects actual it can be created but not visible and also the attribute table empty. what can I do for solving it? Can plz give a replay
Same here. Its created but not shown😢
Please Sir share DSASA software..and kindly guide me is this procedure used for prediction?? What is the purpose of this analysis,?
To predict the erosion of Shorelines, we need the erosion rate, and so, using this tool, we can define the erosion rate
Thanku soo much Sir
Hello everyone,
I work with the digital shoreline analysis system (DSAS of USGS) to my thesis, in the process i have a error with the calculate change statistics. The program say: "Unable to find output file 'C:\Users\...DSASCore.out.xml'
Does anyone know what the solution is?
Thanks!
Please check your email.
@@rahamatali6846 COMO LO PUEDO CONTACTAR AMIGO
please can you help me to calculate Supplemental Statistics ( LR2, LSE,LCI90) and plotting the results
Yes, Pleaes send your project details
may I ask you in email about error on my process?
I have created transect, it's showing created, but it's not shown. What is the reason? How I can fix it??
Did you fix it. If you did please help me@Asma Javed
@@anamikadas9946 yes I fix it
@@anamikadas9946 I will suggest you you should download sample data from website, then check it,, after that you have an idea, where you did mistake.
@@asmajaved7201 where can i get the datas?
Sir kindly share software of DSAS
Sir good evening, can you help us with this?
6. Please check the previous version of DSASAddin to avoid error
C:\Users\user\AppData\Roaming\Corona Environmental Consulting
I dont know which one should I fix or remove on the log
Please delete all xml file from "metedata" Folder and Log file.
Plz help! I'm facing the same trouble... How can i fix it? I deleted all xml n log file. But still in trouble 😓
@@ibrahimmasudoceanographer2218 don't delete log file. Please delete only the texts from the log file.
@@rahamatali6846 i am facing the same error. Should I delete all text present in the log file? and all the text of the xlm file? Please give me more details on how to resolve this error. I would be very grateful!
ভাই, আসসালামু আলাইকুম। আমি আপনার টিউটোরিয়াল অনুযায়ী DSASv5 ব্যবহার করে সবগুলা রেজাল্ট বের করেছি। কিন্তু, আমি আসলে Attribute table থেকে ডাটা নিয়ে কিভাবে আমার থিসিস পেপারে সেট করবো এটা নিয়ে কিছুটা সমস্যায় পড়েছি। আপনি যদি এই ব্যাপারে একটু হেল্প করতেন অনেক উপকৃত হতাম ভাই।
A mdb file and a txt file will be created to your workplace. You can use this file. Otherwise you can mark the attribute table, copy from the table and paste to excel file. Also you can create dbf file which can converted to excel or csv file.
how can i get folder calc, data?
You need to digitize the shoreline for different years (Need Basis). You can use google earth pro, ArcGIS, Sattelite images.
HOLA ME PUEDES AYUDAR EN ALGO PORFA
Kindly guide me??
An unexpected error occurred. Please refer to the log file(C:\Users\User\AppData\Roaming\Corona Environmental Consulting \ DSAS v5 add-in\ DSAS_log.txt) for additional details after closing ArcMap.
How can i fix it? Plzzzz help...
Please keep a text file naming "DSAS_log" to the directory.
@@rahamatali6846 thanks dear! ❤️
Can I have Your whtspp?
Thanks again.
Friend, did it work? I'm also having the same problem
@@rahamatali6846 where is the directory?
@@AanAkmalCH did you fix the problem? Can you help me? I'm also having this problem.
Sir this is showing some error that is Dsas error.. optional field not found in baseline layer. What should i do ?
Hello
Even though I prepared the shoreline and baseline layers, they are not visible. How can I solve this problem?