My freshwater pump has been cycling every few seconds, but I had no leaks anywhere. So I opened up my pump to clean out the trapped debris (fixed the cycling issue) and was amazed at the internal mechanics. I thought they were just one plunger with a check valve on each side. What cool engineering! Thanks for this video!
Excellent video. Not too long. Each process very well explained. I see that you have taken pains to assemble and disassemble in order to explain each and every detail. Thanks very much bro.
Awww man awesome video, it help me a lot and now i understand how that pump works. It's very nice that you showed how the pump works dismantled into parts, thanks to which you can see what effect is created inside.
Many thanks - Helped me troubleshooting mine which stopped working after very little use (filtering distillates) and I feared the rubber had perished, but it seems I gunked the valves! All working now, thanks!
Thank you, that was a great explanation! Pump in my undersink RO has just failed (leaking) and at least now I can see how it was *supposed* to work. I think diaphragm must have split :-( As you say, the motors are quite handy without the pump head, so I think I'll just replace it and score a useful DC motor. You never know when it might come in handy!
Thanks much for this. I was trying to figure out if the rotating plate on the back was supposed to be centered. You clarified that it is not supposed to rotate centered. My SEAFLO 33 series pump (8A) is causing my boat battery voltage to drop from 12.6v to 10v when engine not running. I'm guessing I need to check the ground wire.
There are several things that could cause that. The motor could be going bad and is shorted. The wiring could be shorted. The battery could be too small for the job. The battery could be going bad. Etc.
Cool video! I had a summer job assembling diaphragm pumps, and although the concept is exactly the same (piston opening and closing a chamber with 2 valves) the manufacturing process was much different. We also made pumps with 5 chambers "taking turns" which further stabilizes the flow.
@@tsbrownie mostly inkjet printers, but also for biochem labs and in coffee machines. Seeing the manufacturing process behind the things we use in daily life is really fascinating! I appreciate the video 👍
i've been looking for more information on diaphragm pumps , can you please share what manufacturer did you work for or where can I look for more explanation.
Great video. I have this kind of pump in my motorhome and want to prepare my motorhome for the winter. How can I empty the pump for water so it will not freeze during the cold winter in Norway ? Is it possible to use a vacuum cleaner to suck or blow (for example from the bathroom). Will this completely emptying the pump ? Or is the best way to run the pump for a little time with no water in the system ? It is the pump that is the issue here, not the plumbing system.
In theory you could run it with an open input line for a while. Or blow air in the input while running it. It's probably safest to loosen the screws and open the chamber a crack. The orientation can make a difference how much water is left inside. Or you could clear it by running alcohol through it! 😉
Was hoping for some troubleshooting tips. Specifically, what should be the intake pressure? You said output should be 30 -40 lbs. However, to test in field means to flood the host structure (in my case a camper) with water. There is a -t-junction on the input side with siphon hose (for winterizing -one side of the T is to the fresh water, the other the siphon hose. If I test the suction pressure there, what should it be?
Bonjour SVP pour les pompes booster de 50 à 600 GPD est ce que les têtes de pompes (diaphragme)sont les mêmes cad interchangeables et merci Hello please for booster pumps from 50 to 600 GPD are the pump heads (diaphragm) the same interchangeable cad and thank you
my 2006 8009 has some slight suction on start-up, which quickly dissipates (i.e. no more suction) at the intake (no hose). if i manually feed water into the pump, the pump does create pressure, eventually maxing out and turning the pump off. so the switch is working and the pump makes pressure provided i feed the pump manually. does this mean the rubber valves on the suction side are worn out? i've taken it apart and cleaned it several times, so i'm certain its not debris in the pump. the unit is on a pressure weed sprayer. hate replacing it, we've been through a lot together, but i'm not sure its economical to rebuild. excellent video, btw, exactly what i was looking for to understand how this thing worked.
Hi sir, I have a 33 series eco worthy 110v diaphragm pump which began leaking. Am I able to use a shurflo replacement for it, or where would I be able to find the replacement?
No, they are not good air pumps. Wattage depends on the model. Some are 12 volt, others 24. Some are 1 amp, 2 amp, 2.5 amp .... just multiply the volts times the amps of the model you are interested in.
That's a good question. I've had 4 pumps now, and in every case it's the rubber valves that rot first, followed by the "pistons." If the rubber parts were of silicone rubber, I'd guess the things would last 10x longer. I've tried to find replacement parts, but of course they have no financial incentive to sell those. Plus none of the pump brands I've seen have interchangeable pump parts, although the motors seem to be more standardized (but I've never seen a motor fail first).
@@tsbrownie That's unfortunate about the rubber deterioration but makes sense. A "service kit" of new rubber valves could be sold for $5 while still making a huge profit, but I'm sure the manufacturers make bigger $$$ by selling whole units. Sad state of our throw-away society I suppose. Appreciate the input, and thanks for the video!
@@VanwithTim In Europe there is a big "right to repair" movement going on. We need that also. BTW I have seen a couple of your vids, about an AC and solar for your van.
@@VanwithTim I actually worked for a company that would in fact sell existing customers replacement part kits that mostly included the rubber bits that fail first. I put together over 1000 of them.
@@catalinseverineanu2550 I can't say for sure. Not sure how much pressure the screws are under. The screws might be stainless which resists many types of acid. I have seen these used in college chemistry labs to circulate caustic chemicals, but I don't know what type or how strong.
@@tsbrownie Thanks. Yes, maybe plastic screws is not a good idea. Some resin sealer or powder coating or nothing at all on those three screws are better ideas. I will try.
@@tsbrownie I found a good easy to apply solution to protect those small steel screws against chemical corrosion: powder coating using a fluid bed. Here are two examples: ua-cam.com/video/KRWMyLXN3zQ/v-deo.html and ua-cam.com/video/Gh9WWEmkEUc/v-deo.html
@@srather7551 Interesting. They are mostly used in RO water filters and I've seen a chemistry department use them to circulate chemicals. So now I know of another use for them. Thank you.
@@tsbrownie thank u for your advice my friend , and I know diving thats why i think tubes are a burden for recreational low depth diving. I ask you because thats the only diaphragm pump oil less i see suitable if pressure goe up to 35 lb/in and 15 l/min air the one youshow is 4.5 l/min but the model I see in the market goes up to 15 Water
@@lacuentadevideos Sounds like an interesting project. Something beyond me! Have you seen the "Air Buddy"? It's an electric diving air pump. (They used to make a gasoline powered one years ago.) Bauer makes oilless air pumps (but they are expensive). And there are "medical air pumps".
I have a friend who used one to pump water over a waterfall in his fish pond. I don't know if it will pump air well. Probably better to use an air pump.
@@sacdesaram There are many types. Small ones use bellows. Mid-size are often piston type like car-tire pumps that will run long term (car tire pumps won't). Big air pumps are like turbines. There are more types and you can search on google "different types of air pumps" and see most.
I have had very good results with them. They fail when the rubber parts break down. The motors far outlast the pump stage. I've seen them used in a college chemistry lab to circulate fluids.
Wow, great video. If only all youtube DIY videos were this well put together and explained so clearly and calmly. Thank you so much for sharing this.
@@capt111 Thank you!
My freshwater pump has been cycling every few seconds, but I had no leaks anywhere. So I opened up my pump to clean out the trapped debris (fixed the cycling issue) and was amazed at the internal mechanics. I thought they were just one plunger with a check valve on each side. What cool engineering! Thanks for this video!
You're welcome.
I had opened the pump of our RO filter and was wondering how this thing works. You have explained it very well. Many Thanks.
Excellent video. Not too long. Each process very well explained. I see that you have taken pains to assemble and disassemble in order to explain each and every detail. Thanks very much bro.
A well presented Vlog explaining the proper function of the pump. Thanks
Lots of great information on how diaphragm pump works to pump liquids, thanks.
Thank you for explaining the process of how it works
Awww man awesome video, it help me a lot and now i understand how that pump works. It's very nice that you showed how the pump works dismantled into parts, thanks to which you can see what effect is created inside.
Understanding of working of RO pump made easy. Thanks 👍.
Excellent demo, great
explained beautifully, thank you.
Very clear explanation
Excellent video. Thanks
Many thanks - Helped me troubleshooting mine which stopped working after very little use (filtering distillates) and I feared the rubber had perished, but it seems I gunked the valves! All working now, thanks!
Glad it helped.
Explained very clearly. Thank you for the video
You are welcome!
Thank you very much for such a clear video. It helped me troubleshoot and ultimately fix a backpack sprayer pump.
Great design!
Thanks, it was very helpful. great job at explaining!
Thank you.
Thank you, that was a great explanation! Pump in my undersink RO has just failed (leaking) and at least now I can see how it was *supposed* to work. I think diaphragm must have split :-( As you say, the motors are quite handy without the pump head, so I think I'll just replace it and score a useful DC motor. You never know when it might come in handy!
Excellent! Thank you for sharing.
Glad you liked it.
Thanks for the video...
Clean explanation .. Thank you
Thanks. That was what I wanted to know.
Thanks a lot
You deserve Millions of likes
Thank you.
Bien expliqué , ce que je cherche depuis longtemps Merci infiniment pour la vidéo
"Well explained, what I have been looking for for a long time Thank you very much for the video" Thank you!
Wow super helpful!
Great share, thanks
Many thanks for this super informative video. 👍
Thank you for stopping by.
Thanks much for this. I was trying to figure out if the rotating plate on the back was supposed to be centered. You clarified that it is not supposed to rotate centered.
My SEAFLO 33 series pump (8A) is causing my boat battery voltage to drop from 12.6v to 10v when engine not running. I'm guessing I need to check the ground wire.
There are several things that could cause that. The motor could be going bad and is shorted. The wiring could be shorted. The battery could be too small for the job. The battery could be going bad. Etc.
Cool video! I had a summer job assembling diaphragm pumps, and although the concept is exactly the same (piston opening and closing a chamber with 2 valves) the manufacturing process was much different. We also made pumps with 5 chambers "taking turns" which further stabilizes the flow.
That's interesting. What were they used for?
@@tsbrownie mostly inkjet printers, but also for biochem labs and in coffee machines. Seeing the manufacturing process behind the things we use in daily life is really fascinating! I appreciate the video 👍
@@triplediff Interesting. Thanks for the reply.
i've been looking for more information on diaphragm pumps , can you please share what manufacturer did you work for or where can I look for more explanation.
Just the video I needed to see! Thanks 😊
You’re welcome
Excellent explanation!!..
Thank you.
Thank you.
excellent job!!
Glad you liked it!
Nicely explained.
Thank you.
Informative video. Thanks 👍
Glad it was helpful!
Very helpful. Thanks
You're welcome!
Clearly explained.Thanks.
You are welcome.
Thanks a lot...
Very nice
Good Job! Thanks
Thanks for watching!
Well done 👍👍👍
Thanks for the visit.
Cool.video,
Thanks man 👍
You bet
Am currently restoring one at my internship
I took it apart and cleaned it out. Put it back together. But the pump started leaking air.
Great video, ran for 3 years, now I need to replace the brushes. Where can I find your video on the motor you referred to, thanks
Thanks. You can find it here: ua-cam.com/video/wPj4fdJqE00/v-deo.html
Great video. I have this kind of pump in my motorhome and want to prepare my motorhome for the winter. How can I empty the pump for water so it will not freeze during the cold winter in Norway ? Is it possible to use a vacuum cleaner to suck or blow (for example from the bathroom). Will this completely emptying the pump ? Or is the best way to run the pump for a little time with no water in the system ? It is the pump that is the issue here, not the plumbing system.
In theory you could run it with an open input line for a while. Or blow air in the input while running it. It's probably safest to loosen the screws and open the chamber a crack. The orientation can make a difference how much water is left inside. Or you could clear it by running alcohol through it! 😉
Thanks for the video. Can we use them for filtering wine and beer?
You're welcome. I'm not sure if they can. That's up to the manufacturer.
Was hoping for some troubleshooting tips. Specifically, what should be the intake pressure? You said output should be 30 -40 lbs. However, to test in field means to flood the host structure (in my case a camper) with water. There is a -t-junction on the input side with siphon hose (for winterizing -one side of the T is to the fresh water, the other the siphon hose. If I test the suction pressure there, what should it be?
This is a high pressure pump from an RO water filter. I have no specs for camper use. Output max is around 80 psi and varies with manufacturer.
Bonjour SVP pour les pompes booster de 50 à 600 GPD est ce que les têtes de pompes (diaphragme)sont les mêmes cad interchangeables et merci
Hello please for booster pumps from 50 to 600 GPD are the pump heads (diaphragm) the same interchangeable cad and thank you
my 2006 8009 has some slight suction on start-up, which quickly dissipates (i.e. no more suction) at the intake (no hose). if i manually feed water into the pump, the pump does create pressure, eventually maxing out and turning the pump off. so the switch is working and the pump makes pressure provided i feed the pump manually. does this mean the rubber valves on the suction side are worn out? i've taken it apart and cleaned it several times, so i'm certain its not debris in the pump. the unit is on a pressure weed sprayer. hate replacing it, we've been through a lot together, but i'm not sure its economical to rebuild. excellent video, btw, exactly what i was looking for to understand how this thing worked.
When mine fail, it's always the valves that break down.
@@tsbrownie $40 for the valves, i think i can work with that. replacing more than that starts creeping into replacement cost territory. thanks.
Hi sir, I have a 33 series eco worthy 110v diaphragm pump which began leaking. Am I able to use a shurflo replacement for it, or where would I be able to find the replacement?
I don't know that. Perhaps another viewer will.
Do these pumps create enough pressure that i can use them as a compressor for a project?
They are water pumps and the ones I have produce about 80 psi max. They are from RO water filters.
@tsbrownie Excellent video, Can the pump be used to pump air or create vacuum? What is the wattage of the pump?
No, they are not good air pumps. Wattage depends on the model. Some are 12 volt, others 24. Some are 1 amp, 2 amp, 2.5 amp .... just multiply the volts times the amps of the model you are interested in.
@@tsbrownie Thank you. Which battery operated or manual vacuum/air pump can you recommend?
Can air or vacuum pump be made at home?
@@adeyemibabatunde1814 I do not have much experience with those.
What else can you use the motor for? I have one but dont want to throw it away
They are a pretty good dc generator. They are reversible. Turntable for taking photos. Solar projects needing a motor.
Nice video. What is the rpm of the motor
I don't remember, but it's not fast. It was made more for torque.
I hear about the diaphragm pumps dying in RV applications over the years... Wonder what piece fails?
Seems the design is relatively bulletproof.
That's a good question. I've had 4 pumps now, and in every case it's the rubber valves that rot first, followed by the "pistons." If the rubber parts were of silicone rubber, I'd guess the things would last 10x longer. I've tried to find replacement parts, but of course they have no financial incentive to sell those. Plus none of the pump brands I've seen have interchangeable pump parts, although the motors seem to be more standardized (but I've never seen a motor fail first).
@@tsbrownie That's unfortunate about the rubber deterioration but makes sense.
A "service kit" of new rubber valves could be sold for $5 while still making a huge profit, but I'm sure the manufacturers make bigger $$$ by selling whole units.
Sad state of our throw-away society I suppose.
Appreciate the input, and thanks for the video!
@@VanwithTim In Europe there is a big "right to repair" movement going on. We need that also. BTW I have seen a couple of your vids, about an AC and solar for your van.
@@VanwithTim I actually worked for a company that would in fact sell existing customers replacement part kits that mostly included the rubber bits that fail first. I put together over 1000 of them.
Excellent video. Do you know if the liquid would touch the 3 screws in the piston tops?
Yes it will. The screws in this one were stainless steel.
@@tsbrownie Is it possible to replace the metal screws with plastic screws so this pump could be used with mild acid?
@@catalinseverineanu2550 I can't say for sure. Not sure how much pressure the screws are under. The screws might be stainless which resists many types of acid. I have seen these used in college chemistry labs to circulate caustic chemicals, but I don't know what type or how strong.
@@tsbrownie Thanks. Yes, maybe plastic screws is not a good idea. Some resin sealer or powder coating or nothing at all on those three screws are better ideas. I will try.
@@tsbrownie I found a good easy to apply solution to protect those small steel screws against chemical corrosion: powder coating using a fluid bed. Here are two examples: ua-cam.com/video/KRWMyLXN3zQ/v-deo.html and ua-cam.com/video/Gh9WWEmkEUc/v-deo.html
does this ro pump work as air pump ? i wish to use for air brushing
I have tried to pump air and it does not work well with compressible stuff.
My Motor is in working condition but water flow is very low, what to do please help.
Usually it's the valves that are bad. I've never found replacements. 😔
can a 24v pressure pump be used for making fumigation tunnel?
Sorry, I have no experience with fumigation tunnels.
today i tried and it worked very well.
@@srather7551 Interesting. They are mostly used in RO water filters and I've seen a chemistry department use them to circulate chemicals. So now I know of another use for them. Thank you.
just what i was looking for, I want to use this pump for air for a hookah diving do you think or try if it will work with air?
I do not think it will pump air in the quantities you would need. Please learn diving before you try using compressed air. Mistakes will kill.
@@tsbrownie thank u for your advice my friend , and I know diving thats why i think tubes are a burden for recreational low depth diving. I ask you because thats the only diaphragm pump oil less i see suitable if pressure goe up to 35 lb/in and 15 l/min air the one youshow is 4.5 l/min but the model I see in the market goes up to 15 Water
@@lacuentadevideos Sounds like an interesting project. Something beyond me! Have you seen the "Air Buddy"? It's an electric diving air pump. (They used to make a gasoline powered one years ago.) Bauer makes oilless air pumps (but they are expensive). And there are "medical air pumps".
@@tsbrownie yes, i saw them now I think so also because the displacemt of those diaphragms are small, and air compresses , guess more than 2;1
سلام بی زحمت همین ویدیوبه فارسی زیرنویس شودخیلی خوب است.باتشکر
متشکرم، اما در حال حاضر من در حال از دست دادن پول هستم و نمی توانم آن را بپردازم.
Can I replaced the head with other pump head.
I have looked at that, and the other brands have small differences that keep the heads from being interchangeable.
What is weight of this pump?
I'd guess around 2 kilograms.
What is waffley effect please explain
The pump part is moving fast and the camera sees it as a wavy effect. Waffling can mean to change position quickly.
अगर डोमेस्टीक आर ओ सिस्टीम में 80 GPD का मेमरन युज किया है
तो उस में कितने GPD का पंप युज करना चाहीए
If the memory of 80 GPD is used in the domestic RO system
So how much GPD pump should be used in it?
Hi tsbrownie, can I use the pump to pump ait to my fish tank? Please reply.
I have a friend who used one to pump water over a waterfall in his fish pond. I don't know if it will pump air well. Probably better to use an air pump.
@@tsbrownie Thank you for your reply. Does the air pump have no diaphragm?
@@sacdesaram There are many types. Small ones use bellows. Mid-size are often piston type like car-tire pumps that will run long term (car tire pumps won't). Big air pumps are like turbines. There are more types and you can search on google "different types of air pumps" and see most.
@@tsbrownie Thank you so much. Appriciate it very much.
Are these pumps reliable?
I have had very good results with them. They fail when the rubber parts break down. The motors far outlast the pump stage. I've seen them used in a college chemistry lab to circulate fluids.
@@tsbrownie Thanks! one last thing, are these pumps can be use as compressor?
@@ibringthelastwords1358 I do not think so. The stroke is very short. They are built to move incompressible fluids.
I’m using “waffley effect” from now on lol