Hey it turned out how you wanted right? You did all the work right? So don't listen to other peoples critiques. This is how I started, cutting up bikes,cars, whatever I could to find the pieces I needed to make what I wanted to make. Trust me keep doing what you re doing.
Welding galvanised steel is dangerous due to the toxic fumes. The welds will also be badly compromised. The welding shown in this video would never be certified. Bicycle frames are not strong enough to be used as Motor bikes.
I totally agree about the galvanized steel. Welding it is quite dangerous, unless you have a downdraft table(still not adviseable). Like you said the weld quality with it is sh*t at best. With the bike parts statement I'd have to disagree. As long as the frame is steel, your only real worry is the droupouts. If you can fortify the dropouts and use torque arms, you should be alright. I've seen homebrew bikes built off hardtail mtb frames with swapped out suspension forks clock 100+mph. Certainly not for the faint of heart by any means.
Sonho de consumo montar uma dessas,linda, perfeita
Tgank you ❤️😊
09:50 🤯🤯😒
Abi bana verebilirsin o maşayı😊
türkiyedeki sayılı kanallardansın abi devamını bekliyoruz
Çok teşekkür ederim
It's looking great, my friend! Really well done!!! 😃
Stay safe there with your family! 🖖😊
Thank you bro
Hey it turned out how you wanted right?
You did all the work right?
So don't listen to other peoples critiques.
This is how I started, cutting up bikes,cars, whatever I could to find the pieces I needed to make what I wanted to make.
Trust me keep doing what you re doing.
Thank you very much.❤️
kral eline sağlık
Very nice
Thanks
türk kardeşim harikasın bizde de çok kişi var ancak devlet imkan vermiyor
Teşekkürler. 👍❤️
@SinanKeskinDC bende merakliyim aslında çok durumum olmadığı için kendim yaparak daha ucuza getirmeye çalışıyorum şimdi bunun maaliyeti kaç lira olur
Welding galvanised steel is dangerous due to the toxic fumes. The welds will also be badly compromised.
The welding shown in this video would never be certified. Bicycle frames are not strong enough to be used as Motor bikes.
Thank you very much. 👍
I totally agree about the galvanized steel. Welding it is quite dangerous, unless you have a downdraft table(still not adviseable). Like you said the weld quality with it is sh*t at best. With the bike parts statement I'd have to disagree. As long as the frame is steel, your only real worry is the droupouts. If you can fortify the dropouts and use torque arms, you should be alright. I've seen homebrew bikes built off hardtail mtb frames with swapped out suspension forks clock 100+mph. Certainly not for the faint of heart by any means.
nice dirt bike chasis from a bicycle.....
Üstat elektrot kaç mm acaba. Ayrıca kaç amperde yaptınız kaynağı
Very idea
idea was good but you should have made the entire new frame
Thank you
Can i use the rear tier from tomos apn4
Good jop
Thank you
Get a dnm shock for rear range of sizes and coil over hydraulic and air
Right. But I try to make low budgeth.
next time use a cycle with tapered headset/headtube since u intend to build a dirt bike from bicycle frame...
🇧🇷 ❤🚲
Its need to have dirt bike rims not bicycle parts
Right. But idea is making it what you have cheap parts
Bu vidoe eskimi
Hayır
Excuse me,250w is nothing. it can't climb hill.try 2000w,it is powerful,and climb any steep hill.
I have no motor and battery. I will try it.
You can use electric rikshaw motor
Those are very powerful
You can try 1500 w motor
But you have to make reduction gearbox for the optimal performance
@@Donisbackvvvvcwont the motor sold as rickshaw motors come with an inbuilt reduction gearbox..?
@@kareemvitar6645 2000w is nothing you should try 25000. Everyone has to crawl before they run from the cops.
@@dd-jf1lh Why cops?!!!!!
Какой толк от его.нет ни педалей,ни двигателя
Follow please
Всё будет, главное верить в автора! ✌
Молодец, из дешёвых деталей сделал раму 👍🔥
Jitna bada video nahi hai usse jada to add dale ho
dami mo sinirang bike, mas ok pa ung dati sana ginawan mo nalang ng lagyanan yung motor😂
😆
Sunroof
Thanks