@@nitishchauhan2187 ऑक्सीजन सिलेंडर और डीए (डेंटल एयर) सिलेंडर में नेक रिंग लगती है ताकि उन्हें ट्रांसपोर्ट करते समय या स्टोरेज में उनकी सुरक्षा हो सके। ये रिंग सिलेंडर के गले को बचाता है और उन्हें गिराने या खराब होने से बचाता है। ऑक्सीजन और डीए सिलेंडर के बीच की दूरी इस बात पर निर्भर करती है कि उन्हें किस तरह से स्टोर या ट्रांसपोर्ट किया जा रहा है। आम तौर पर, सिलेंडर को एक दूसरे से अलग रखना चाहिए ताकि उनमें से कोई एक के गिर जाए या खराब होने से दूसरे को कोई नुक्सान न हो। अगर आप सिलेंडर को एक दूसरे के साथ रखते हैं, तो उनके बीच की दूरी 10-15 सेमी (4-6 इंच) होनी चाहिए। लेकिन, ये दूरी बात पर भी निर्भर करती है कि आप किस तरह से सिलेंडर को स्टोर या ट्रांसपोर्ट कर रहे हैं। इसलिए, हमेशा सिलेंडर के साथ दिए गए सुरक्षा दिशानिर्देशों का पालन करना चाहिए।
1. *Emergency response*: In case of an emergency, such as a fire or accident, the safety officer may need to quickly cut through debris or equipment to rescue someone or prevent further damage. 2. *Equipment maintenance*: Safety officers may need to perform routine maintenance or repairs on equipment, which may require cutting through metal pipes or other materials. 3. *Investigations*: During incident investigations, safety officers may need to cut through equipment or materials to identify root causes or gather evidence. 4. *Training and demonstrations*: Safety officers may need to demonstrate proper cutting techniques or train employees on safe cutting practices. 5. *Risk assessment*: Understanding how to use a welding cutter helps safety officers identify potential hazards and risks associated with hot work activities. 6. *Compliance*: Familiarity with welding cutters ensures safety officers can enforce regulations and standards related to hot work, such as OSHA guidelines. 7. *Hands-on knowledge*: Knowing how to use a welding cutter provides practical experience, allowing safety officers to better understand the challenges and risks faced by employees who perform hot work tasks.
@@asifikramalvi1354 The following individuals should check welding and cutting time safety: 1. *Safety Officer*: Responsible for ensuring compliance with safety protocols and regulations. 2. *Supervisor*: Oversees welding and cutting operations, ensuring safe practices are followed. 3. *Welding/Cutting Operator*: Responsible for their own safety and that of others around them. 4. *Quality Control Inspector*: Verifies that welding and cutting meet safety standards. 5. *Maintenance Manager*: Ensures equipment is properly maintained and safe for use. 6. *Fire Watch*: Assigned to monitor for fire hazards during hot work. 7. *Health and Safety Manager*: Develops and implements safety procedures. 8. *Trained Observers*: May be assigned to monitor specific tasks or areas. These individuals should check for: - Proper personal protective equipment (PPE) - Safe work permits - Fire extinguishers and suppression systems - Ventilation and air quality - Electrical and gas safety - Equipment maintenance and inspection - Compliance with safety procedures and regulations Regular checks and monitoring ensure a safe working environment during welding and cutting operations.
Ese hi har topic or tbt samjao sir ❤thanks daily vdo bnao plz
Good job sir ❤
Vijendra har 1 samaan ka naam bhi bataya karo bhai jo fresher hain use bahot kaam ayega❤
Good
Very nice video Bhai ji
Sir ji bahut information wala video hai
Informative video sir
Acytilin cylinder or o2 cylinder separate vi hona chahie sir
Good information sir
Sir app best tbt dete bhai
O2 cylinder kyu sath me hai??
@@narayankhandagale4500 yes bro
JSA. And. Hira. PC kaise banaye
Next video please sir
Nice video sir
Good safety precaution
Sir hame ye bataye? Jo oxygen cylinder Or DA cylinder me neck ring kyo lagta hai? Or Oxygen or DA cylinder ka distance kitna hona chahiye?
@@nitishchauhan2187 ऑक्सीजन सिलेंडर और डीए (डेंटल एयर) सिलेंडर में नेक रिंग लगती है ताकि उन्हें ट्रांसपोर्ट करते समय या स्टोरेज में उनकी सुरक्षा हो सके। ये रिंग सिलेंडर के गले को बचाता है और उन्हें गिराने या खराब होने से बचाता है।
ऑक्सीजन और डीए सिलेंडर के बीच की दूरी इस बात पर निर्भर करती है कि उन्हें किस तरह से स्टोर या ट्रांसपोर्ट किया जा रहा है। आम तौर पर, सिलेंडर को एक दूसरे से अलग रखना चाहिए ताकि उनमें से कोई एक के गिर जाए या खराब होने से दूसरे को कोई नुक्सान न हो। अगर आप सिलेंडर को एक दूसरे के साथ रखते हैं, तो उनके बीच की दूरी 10-15 सेमी (4-6 इंच) होनी चाहिए।
लेकिन, ये दूरी बात पर भी निर्भर करती है कि आप किस तरह से सिलेंडर को स्टोर या ट्रांसपोर्ट कर रहे हैं। इसलिए, हमेशा सिलेंडर के साथ दिए गए सुरक्षा दिशानिर्देशों का पालन करना चाहिए।
@@vijendrayadav4260 thnku sir
Very interesting video
Sir Kaun sa cylinder use kya jata hai.
@@dsvlogofficial2.048 DA and oxygen cylinders
Sir ji agala video kab aa Raha hai
Nice video
Sir O2 cylinder me kitna gas aati hai
Thanks
Nice siir
Training dete ho kya
Why should safety officer know how to use welding cutter.
1. *Emergency response*: In case of an emergency, such as a fire or accident, the safety officer may need to quickly cut through debris or equipment to rescue someone or prevent further damage.
2. *Equipment maintenance*: Safety officers may need to perform routine maintenance or repairs on equipment, which may require cutting through metal pipes or other materials.
3. *Investigations*: During incident investigations, safety officers may need to cut through equipment or materials to identify root causes or gather evidence.
4. *Training and demonstrations*: Safety officers may need to demonstrate proper cutting techniques or train employees on safe cutting practices.
5. *Risk assessment*: Understanding how to use a welding cutter helps safety officers identify potential hazards and risks associated with hot work activities.
6. *Compliance*: Familiarity with welding cutters ensures safety officers can enforce regulations and standards related to hot work, such as OSHA guidelines.
7. *Hands-on knowledge*: Knowing how to use a welding cutter provides practical experience, allowing safety officers to better understand the challenges and risks faced by employees who perform hot work tasks.
@@asifikramalvi1354 The following individuals should check welding and cutting time safety:
1. *Safety Officer*: Responsible for ensuring compliance with safety protocols and regulations.
2. *Supervisor*: Oversees welding and cutting operations, ensuring safe practices are followed.
3. *Welding/Cutting Operator*: Responsible for their own safety and that of others around them.
4. *Quality Control Inspector*: Verifies that welding and cutting meet safety standards.
5. *Maintenance Manager*: Ensures equipment is properly maintained and safe for use.
6. *Fire Watch*: Assigned to monitor for fire hazards during hot work.
7. *Health and Safety Manager*: Develops and implements safety procedures.
8. *Trained Observers*: May be assigned to monitor specific tasks or areas.
These individuals should check for:
- Proper personal protective equipment (PPE)
- Safe work permits
- Fire extinguishers and suppression systems
- Ventilation and air quality
- Electrical and gas safety
- Equipment maintenance and inspection
- Compliance with safety procedures and regulations
Regular checks and monitoring ensure a safe working environment during welding and cutting operations.
Sir koi vacancy hai kya Khali safety officer ka
Mujhe training karni h apka num nhi h isme
Sir apna no Dena pls
9761346093
Nice video sir