Hi, How do you remove the aluminium bar from the swing mechanism please? I have exactly the same type of blind as you. I have tried several ways without success. It feels like the two parts are stuck together. What I'm trying to do is to put the cord back in place that came out. Thank you!
I'm having the most confusing problem where when the roller shades are up, the left side is higher, when the roller shades are down, the right side is higher.. I'm not sure what the fix would be then or what the problem is. The company just told me to put tape but when the blind is fully up or fully down I'll have an uneven issue either way! It's ceiling mounted and 8' long roller shades
In this instance one of the blinds May have more fabric on it than the other . The way to fix this is roll the blinds down so the tube is exposed Run masking tape along the tube from one side to the other and ll the blind back up . You may have to experiment with it and do one blind or the other to see if it improves . Also these sound like a linked blind so before you start adjust the blinds so they are level at the top .
Possibly a dumb question but let say I add to one side like you did in the video and then the problem switches to the other side, do I just add tape to the other side and then keep adding tape to both sides until the problem is sorted?
Neat trick, took 2 mins. to get the correct number of tape strips, the annoying cock-eyed blind is no more. (It works by simply increasing very slightly the circumference of the aluminium roller at one end, but who ACTUALLY first applied the physics to a roller blind??)
the best , fastest and smartest fix I have ever seen...thank you very much.
It worked 🎉 No more blind that only goes up halfway. Thanks for sharing!!
finally someone who actually shows the entire proces
Thank you! This video saved us a lot of hassle as our brackets were bang on 😅
no worries
Absolute genius… thanks so much for sharing this great tip 👍
Thank you SO much for sharing!
Thank you for this tip, worked perfectly!
Brilliant fix. Amazing. Tq.
Nice. Just moved into a new house and this was a small problem. 1 minute, 30 seconds later, problem fixed. Thanks!
Super useful - 1st time fix - thanks
You're a star, thanks
Thanks was a great help
Brilliant saved me!
It was a helpful video. Thank you. Keep up the good work.🙂
Thanks, you saved my day!
Legend
Brilliant
Hi, How do you remove the aluminium bar from the swing mechanism please? I have exactly the same type of blind as you. I have tried several ways without success. It feels like the two parts are stuck together. What I'm trying to do is to put the cord back in place that came out. Thank you!
Thank you very much mate!
Amazing. Thanks!!
I'm having the most confusing problem where when the roller shades are up, the left side is higher, when the roller shades are down, the right side is higher.. I'm not sure what the fix would be then or what the problem is. The company just told me to put tape but when the blind is fully up or fully down I'll have an uneven issue either way! It's ceiling mounted and 8' long roller shades
In this instance one of the blinds May have more fabric on it than the other . The way to fix this is roll the blinds down so the tube is exposed Run masking tape along the tube from one side to the other and ll the blind back up . You may have to experiment with it and do one blind or the other to see if it improves .
Also these sound like a linked blind so before you start adjust the blinds so they are level at the top .
I love you.
Possibly a dumb question but let say I add to one side like you did in the video and then the problem switches to the other side, do I just add tape to the other side and then keep adding tape to both sides until the problem is sorted?
Sometimes instead of putting the tape right at the end of the tube you move it closer to the centre , this can help with the problem you are having
@@BlindRepairSolutions thank you I will try this
What do u do if ur pole is bent
🎉
Neat trick, took 2 mins. to get the correct number of tape strips, the annoying cock-eyed blind is no more. (It works by simply increasing very slightly the circumference of the aluminium roller at one end, but who ACTUALLY first applied the physics to a roller blind??)