An update for anybody trying this.. Reicast is now flycast and it uses MAME roms. Not the bin/lst files anymore.. (would have saved me an hour of my time)
Hey ETA Prime, thanks for the tutorial as always. My current version of retroarch doesn't show reiscast core, instead it has flycast and flycast win ce. Flycast works for anyone out there who also doesn't have the reicast core.
@@woutervandenbussche8899 no, i fiddled with it for a bit and could never get it to work. i found mgalaxy and started messing around with that. it's pretty cool and worth the $$$ imo..
@@jmwilkes76 i got it fixed, Loading lst files for atomiswave AND Naomi doesn't work anymore! Get the rar mame games and load them through the flycast core. Enjoy ;-)
@@woutervandenbussche8899 I got the zips version of the Naomi games from mame 0.139 still get the same error message. My atomiswave games work fine. I have all the bios and nvr ram in the correct folder or atomiswave would not work. How did you get yours working?
When I try playing metal slug 6 or KOF IX. The sound lags and glitches so bad. Also, what core do you guys recommend using. Any assistance will be appreciated
Hey ETA, hope you are well? I am looking for some help please. I followed this tutorial a while back and had atomiswave and Naomi games working just fine with Reicast Libretro, Now all of a sudden all the games seem to run at 25-50% speed with audio sounding like its at 150-200% speed??? Can you shed any light on this please? I notice the reicast core seems to be flycast now? Many thanks in advance ETA
Would everything be exactly the same including bios etc when using the flycast core? I’m in a newer version of retroarch and Reicast is not available. I followed all the steps and I have the games loaded into the library in LaunchBox however I can’t get them to play. Any thoughts?
I'm also in the same position. I have both the bin/lst ROMs and the the Zip ROMs. But can't seem to get flycast to run Naomi. It always reads "Failed to Load Content"
I got it working but had to keep an older version of retro arch that still had it installed / config’d...one thing to check is video driver, I think it has to be set to GL in Retroarch...as for consistency...some games have issues (virtua tennis)...also I can’t get controllers to register to for atmoswave games....just FYI. There is another emulator tho out there
I don t know what to do... Sammy emulation for ss6 ans kof11 or buy the hardware to play with my supergun and my two neogeo sticks ? Did emulation need loot of power ? What about the real hardware feeling ?
I have a question that is LaunchBox related, but not related to this particular video. I added games to my LauchBox setup and played with them a bit. I then added a few .ISO images to the folder containing the games and when I scan for new games, LaunchBox tells me it didn't find any. Any tricks into forcing these to show? I don't actually want to remover all of them and start from scratch. Thanks!
I know you probably aren't going to see this but every naomi bios zip I've downloaded has several files with .ic27 extensions. I tried your method but it doesn't work with them...
Had the same problem. Changed video driver from Vulkan to gl and it started working. I think I needed to save the config, exit Retroarch, then restart it after changing that setting because the first time I tried to load a game after changing the setting it still gave me the same error
There doesn't appear to be any Reicast listed in Retroarch anymore, and I can't find a clear answer as to whether the new entry, Flycast, is a replacement. Is there newer info for Naomi on Retroarch anywhere?
edward severeid Demul has this beat in the compatibility department for sure. But Reicast has come a long way in the last few months and if you don’t want a bunch of EMU’s this is an awesome option.
I can run the zipped file through retroarch directly with load content and core, but it does not do this through Launchbox. Flycast also uses mame format for Naomi and I have the same problem. Many Thanks Phill
I followed this tutorial a few months ago to set up & run Naomi and Atomiswave games. I just tried to load some games, and after loading up, each game says "Game Over" and closes the game, taking me back to my Launchbox main window.
The most common reasons people have problems setting up this emulator is: 1. They have "Extract ROM archives before running" checked in their RetroArch Edit Emulator window. 2. They do not have their platform name listed in the Associated Platforms tab in their RetroArch Edit Emulator window. 3. Their ROMs are either missing BIOS files or their files are not correct... Much easier to troubleshoot on the community forums. I'd recommend you head over there if you still run into problems: forums.launchbox-app.com/
People seriously need to keep their subscribers updated with NEWER working methods on subjects they post about. C'mon, we're relying on you guys man...
Almost every single tutorial I have tried to follow is always missing one piece of critical information that could have been easily included but costs me hours of researching to find the solution.
This no longer works for Atomiswave...or at least it’s not working for me. Any corrections you know of since making this video that would get it up and running in RA? NAOMI works perfectly.
Just change cabinet settings in the test menu. Push start when this appear. Yo have to have mapping a 'service' button to scroll in the test menu. Normally the error is for the screen orientation.
Can someone please tell me how I can add old school video games to my Nintendo Wii without having a Mac computer it seems that The Homebrew Channel does not work and I guess you don't want it hooked up to the Internet anyways when you have weak flow and a external 1tb hard drive with all of the Wii games on it
Pro-one emulator to run most of your systems. Automatic controller setup (for most part) Con-some RA cores are not quite as good as standalone emulator. I prefer standalone MAME over RA mame cores. In some cases the standalone gets updated faster.
This set up did not work for me! The launch box is great and works as intended. However, I had to do my own research to get it working with other emulators pointing to the right path and most importantly, bios configuration. The tutorial is too long and does not work on newest version, 2020
The link is actually in the comments here. Also, I got those a couple days ago, and importing only imports 10 out of the 77 for Atomiswave and 9 for Naomi
@@codetvirus2010 I stopped using Rocket Launcher years ago as it just adds an unnecessary layer to playing games. Getting a Naomi romset from the Nyaa site gives the .lst files, but trying to import them in launchbox will only recognize 4 of them.
@@RyanKMoore It gives something more than that. Launchbox only reconize the ones that exist with the same name as the Launchbox program database. Just change the names of the folders, .lst and .bin or .dat. Also change the name of the rom inside the .lst editing it with notepad. Ill recomend downloading the database from hyperlist to get the exact rom name.
@@mikejohnson3874 Yeah, just checked the libretro page and it mentions MAME roms are no good. Guess it's time to download like 15 dubious romsets to find some bins >< OTOH they have the .lst files over there.
@@mikejohnson3874 When importing the rom sets on those sites only a handful work. It could be bad naming convention, not really sure. Any other places to get a full compatible rom set?
cracrus2 not yet but I’m sure these guys and gals will have it working soon. They have been at it non stop for the last few months and the Emulator has come a long way in that time.
UPDATE 2019 FIX !!!!!!!!!!!!!!!!!!!!!!!!! Loading lst files for atomiswave AND Naomi doesn't work anymore! Get the rar mame games and load them through flycast. Enjoy ;-)
@@woutervandenbussche8899 I've tryed something else ... Got tips from an other channel; AND i worked, missed the step that you have to add "all" BIOSES and nvRam ... Got some Atomiswave game running but not tested all ... THANKS ... just a precision for some of, you have to add files named with 'list' extension even nor all emulator are working the same way. Hard to find some additional
Cemu is just like any emulator in Launchbox, if you've done a few before already. Only difference, with Wii U games.... you wanna make sure you get the "Loadiine" versions only, when you're downloading them off sites, make sure they say Loadiine. Wii U games are basically a folder with other folders inside. In Launchbox, you point the Launcher to the "code" folder and inside is always an .rpx file. Sometimes the RPX file has funny names, like codewords, or sometimes it's the name of the game. You can rename this file if you'd like. Just point Launchbox to that .rpx file and it'll load up like normal. Hope that helps!
Hey guys, how about making a video and showing us how to make this actually work with any formats of Naomi roms? Some of us not as privileged as you are and we have no way of getting proper roms that you have. You are using a properly converted rom set . Try reading comments from others too ones in a while and answer some questions. This will not work with out proper step by step type of a set up. I personally tried step by step that is showed in this video and retro arch fails to open my roms. I have correct list and dat files including bios.
It's pretty simple, just add these names to the retroarch core in supported system at the beginning of the ahk information and a little below. And like always point to the core in the module settings.
Running Terrordrome on Mame android please or rasp 3/4 !!! ♡♡♡ Also Deathsmiles... And if you can have a image retroarch or recalbox who is already ok for Rasp 4,4go (but in video output gpio in 15 khz or better in vga 640x480p,it's for a arcade jamma adaptor),thanks a lot...I will be happy.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
For people watching this in 2022, i just followed the tutorial with the new flycast libretro and its working like a charm :)
Would be great to get an new/updated video for this one, as Reicast is now Flycast, and uses MAME roms instead of BIN/LST files
Yes please we need an updated video
You can still use bin/cue with flycast.
Exactly what I am looking for! Tks Prime
An update for anybody trying this.. Reicast is now flycast and it uses MAME roms. Not the bin/lst files anymore.. (would have saved me an hour of my time)
RetroArch is quickly replacing all my other emulators, I love it.
Mike Johnson yeah it’s crazy what they have going on now.
I hope one day we could centralize everything
Metal Slug 6 on Atomsiwave is by far the most beautiful of the series.
What up ETA Prime! I’m in the process of modding my Switch to use Retroarch. Love Launchbox for my pc and love your vids.
Afrim Kosovrasti Awesome! Thank you.
Great - this is exactly what I asked for! Thanks!
Hey ETA Prime, thanks for the tutorial as always. My current version of retroarch doesn't show reiscast core, instead it has flycast and flycast win ce. Flycast works for anyone out there who also doesn't have the reicast core.
Zeldroid I followed the instructions as above but with flycast and it didn’t work
@@jvale120 i just finished setting up flycast following this vid and got the same results.
Doesn't work with flycast
Thanks flycast worked perfectly!
ETA Prime, can we get an update on setting up Sega Naomi in Launchbox? Reicast is no longer available in retroarch.
this is cool, hope to see the TI-99/4A on launchbox one day
Any chance this tutorial can be updated with the latest RetroArch and Flycast?
Can you make a tutorial for the Teknoparrot and Open parrot arcade games?
Can Anyone put the list of FULL ROMSET of NAOMI and ATOMISWAVE ???? Thks
Im not sure if i have the complet sets
ua-cam.com/video/gI1wL89w8PQ/v-deo.html
can you please do an update tut on setting up flycast?! i followed the same steps but used the flycast core and nothing doin.. :(
did u get it fixed? i can't even select reicast in the dropdown menu from launchbox. It isn't there.
@@woutervandenbussche8899 no, i fiddled with it for a bit and could never get it to work. i found mgalaxy and started messing around with that. it's pretty cool and worth the $$$ imo..
@@jmwilkes76 i got it fixed,
Loading lst files for atomiswave AND Naomi doesn't work anymore! Get the rar mame games and load them through the flycast core. Enjoy ;-)
@@woutervandenbussche8899 I got the zips version of the Naomi games from mame 0.139 still get the same error message. My atomiswave games work fine. I have all the bios and nvr ram in the correct folder or atomiswave would not work. How did you get yours working?
@pond 0809 You don't need to put there naomi 2 since flycast can only emulate naomi 1 games...
Just question.. reicast doesnt show up on core updater. Am using 1.7.1 on retropie.
it has been renamed to flycast
Reicast is not in my list has it changed?
When I try playing metal slug 6 or KOF IX. The sound lags and glitches so bad. Also, what core do you guys recommend using. Any assistance will be appreciated
Hey ETA, hope you are well? I am looking for some help please. I followed this tutorial a while back and had atomiswave and Naomi games working just fine with Reicast Libretro, Now all of a sudden all the games seem to run at 25-50% speed with audio sounding like its at 150-200% speed??? Can you shed any light on this please? I notice the reicast core seems to be flycast now? Many thanks in advance ETA
When unzipping the rom, I do not see an lst file. How do acquire the file?
I asked too ... waiting for the answer ...
I did all this but instead of Reicast I get Flycast. What's the issue here?
I did the same thing. I got no issues. having issues?
@@bgcorporation Hey... Can you help me?
Would everything be exactly the same including bios etc when using the flycast core? I’m in a newer version of retroarch and Reicast is not available. I followed all the steps and I have the games loaded into the library in LaunchBox however I can’t get them to play. Any thoughts?
don't use roms in BIN / LST anymore use the old .zip MAME rom format with flycast
Do you have a guide on how to set up retroarch 1.8.5 and lanuchbox to play Dreamcast games and Wince games?
Core does not auto populate when looking for Reicast as on the latest version of Retroarch as on 5/31/2020
This tutorial doesnt work anymore wit flycast core, we need a new one, thanks!.
yeah found out too..looks like reicast got removed...good thing I had a backup
I'm also in the same position. I have both the bin/lst ROMs and the the Zip ROMs. But can't seem to get flycast to run Naomi.
It always reads "Failed to Load Content"
I got it working but had to keep an older version of retro arch that still had it installed / config’d...one thing to check is video driver, I think it has to be set to GL in Retroarch...as for consistency...some games have issues (virtua tennis)...also I can’t get controllers to register to for atmoswave games....just FYI. There is another emulator tho out there
@@wrightguyz Ok, I'll try with an older version of retroarch too, I didn't think in that, thank you.My video driver its in Gl already.
@@peterflores8384 Yes, same to me.
Thanks
I don t know what to do... Sammy emulation for ss6 ans kof11 or buy the hardware to play with my supergun and my two neogeo sticks ? Did emulation need loot of power ? What about the real hardware feeling ?
Hi, thanks for the amazing video as I was waiting for such a tutorial. Only thing that I wanted to know where can I get the bios?
You and me both
I have a question that is LaunchBox related, but not related to this particular video. I added games to my LauchBox setup and played with them a bit. I then added a few .ISO images to the folder containing the games and when I scan for new games, LaunchBox tells me it didn't find any. Any tricks into forcing these to show? I don't actually want to remover all of them and start from scratch. Thanks!
Use the 7zip tool to extract the files from the ISO.
ETA Prime, do you mind doing a tutorial on loading Sammy Atomiswave games on the Nintendo switch using Retroarch?
I know you probably aren't going to see this but every naomi bios zip I've downloaded has several files with .ic27 extensions. I tried your method but it doesn't work with them...
Thank you eta prime
Did everything and Retroarch is telling me "Failed to load content" and Retroarch itself isnt detecting the files when importing
Had the same problem. Changed video driver from Vulkan to gl and it started working. I think I needed to save the config, exit Retroarch, then restart it after changing that setting because the first time I tried to load a game after changing the setting it still gave me the same error
@@AtomFry I have mine set to GL and still get the same error message
Mine with core gl work
There doesn't appear to be any Reicast listed in Retroarch anymore, and I can't find a clear answer as to whether the new entry, Flycast, is a replacement. Is there newer info for Naomi on Retroarch anywhere?
They said flycast doesn't use any Ist files but I can't launch it. Still get fail content load.
my retroarch open boot black screen =( open sound naomi, not working video... any tips?
Getting the same thing as well
i don´t have lst. and bin files...what can i do? thanxs
Is there better performance/compatibility with over Demul?
I was going to ask the same question
According to these guys, Demul has a lot more compatibility. emulation.gametechwiki.com/index.php/Sega_Naomi
edward severeid Demul has this beat in the compatibility department for sure. But Reicast has come a long way in the last few months and if you don’t want a bunch of EMU’s this is an awesome option.
Has Blue Dolphin ever been fixed in Reicast?
Do I need bios for atomiswave also?
I did everything correct but out of 30 games, only 1 is imported and I tried 2 different sets of rom/lst's .. only ikaruga is found
Hello, how do you split roms as you show us ? is there a software or any tool to do that ?
is it possible u can update this. I follow video 100% but not working and do it for neo geo too as not working unfortunately. Thanks
Make sure your video driver in Retroarch is set to gl
Can you do an update version of this please, we are now running flycast and the file system has changed to .ic23 format
I can run the zipped file through retroarch directly with load content and core, but it does not do this through Launchbox. Flycast also uses mame format for Naomi and I have the same problem. Many Thanks Phill
I have all bios mentioned and in the correct places according to retroarch (libretro), but Launchbox cannot launch the games in zip format.
@Lachlan Thompson the pain of having the world at your fingertips yet it wont run on the pretty arcade display :,(
I am using the .bin and .dat files. No .lst. Do I need to download a different ROM pack?
I followed this tutorial a few months ago to set up & run Naomi and Atomiswave games. I just tried to load some games, and after loading up, each game says "Game Over" and closes the game, taking me back to my Launchbox main window.
Make sure video driver in Retroarch is set to gl
@@AtomFry Thanks for the tip, brother! 👍🏼
Adding coins to Atomiswave games seem to only work sometimes. Any ideas on how to fix this?
Can you do a NEW updated tutorial for NAOMI.... I can not get this working..... I have Retroarch v 1.10.0 Someone HELP..... Thank you.
The most common reasons people have problems setting up this emulator is: 1. They have "Extract ROM archives before running" checked in their RetroArch Edit Emulator window. 2. They do not have their platform name listed in the Associated Platforms tab in their RetroArch Edit Emulator window. 3. Their ROMs are either missing BIOS files or their files are not correct...
Much easier to troubleshoot on the community forums. I'd recommend you head over there if you still run into problems: forums.launchbox-app.com/
People seriously need to keep their subscribers updated with NEWER working methods on subjects they post about. C'mon, we're relying on you guys man...
Almost every single tutorial I have tried to follow is always missing one piece of critical information that could have been easily included but costs me hours of researching to find the solution.
@@christianmulligan9719 💯
When I use "clean up images" option an error ocurs and I have to close launchbox ,I'm using last version
I HAVE SETUP FLYCAST ON ANDROID S20 ULTRA, METAL SLUG 6 RUNS SLOW. CAN YOU GIV ME THE SETTING OPTIONS SO IT RUNS SMOOTH?
What are those new rom file types are? I only have ZIP files in hands. how do we get the BIN and LST files?
Can someone send me the official name of the roms to be used? most of the are not getting imported with the launchbox tool
Jean-Francois Beaulieu Did you ever get this figured out? I have the same issue.
This no longer works for Atomiswave...or at least it’s not working for me. Any corrections you know of since making this video that would get it up and running in RA? NAOMI works perfectly.
You could try Demul for Atomiswave, works flawlessly with that emulator.
linoeleven, thanks. I was hoping to avoid using Demul, but I guess I can’t for this. Thanks again.
I had to change the video driver setting in Retroarch to gl to get it to work
Cheers for the tutorial, but anybody else getting ERROR 01 when launching?
Mizar is it a Naomi error or windows error?
@@ETAPRIME Naomi error.
Its in RetroArch, the Naomi is starting with the little video (bios intro) and then from there it says "Error 01"
Just change cabinet settings in the test menu. Push start when this appear. Yo have to have mapping a 'service' button to scroll in the test menu. Normally the error is for the screen orientation.
A list of Naomi error code is pretty easy to find in Google.
same issues here
I cannot find the bios (I think), all I can find is a .ic27 file, not .bin. Is this the same file?
All I get is a blank screen but I can hear the sounds. I tried renaming the.ic27 files to .bin
Many thanks!.The roms running perfect, but any of them have sound for me.Any help somebody?.Thanks!.
Can someone please tell me how I can add old school video games to my Nintendo Wii without having a Mac computer it seems that The Homebrew Channel does not work and I guess you don't want it hooked up to the Internet anyways when you have weak flow and a external 1tb hard drive with all of the Wii games on it
What are the pros and cons to having this set up through RetroArch rather than separate emulators?
Pro-one emulator to run most of your systems. Automatic controller setup (for most part)
Con-some RA cores are not quite as good as standalone emulator. I prefer standalone MAME over RA mame cores. In some cases the standalone gets updated faster.
@@MrEd20901 Thanks for the informative reply. I guess if you're looking for the best overall experience it's best to go with a stand alone emulator.
Onde encontro as bios do naomi para download?
Bios ?
This set up did not work for me! The launch box is great and works as intended. However, I had to do my own research to get it working with other emulators pointing to the right path and most importantly, bios configuration. The tutorial is too long and does not work on newest version, 2020
He doesn’t say where to get the bios
I'm on retroarch and it's says 'failed to load content' despite all the information and even cover art being loaded into the game selection
Same mate
Service menu???? Dont on buttons?
What key is to go into service mode
i not found the reicast core, where is it????!
its called flycast now
For those who ask for romsets just Google nyaa torrent then search Sega Naomi or Sammy Atomiswave...
The link is actually in the comments here. Also, I got those a couple days ago, and importing only imports 10 out of the 77 for Atomiswave and 9 for Naomi
Ryan Moore I use rocket launcher with retroarch and almost every game works except for the Naomi 2's obviously and another few.
@@codetvirus2010 I stopped using Rocket Launcher years ago as it just adds an unnecessary layer to playing games. Getting a Naomi romset from the Nyaa site gives the .lst files, but trying to import them in launchbox will only recognize 4 of them.
@@RyanKMoore It gives something more than that. Launchbox only reconize the ones that exist with the same name as the Launchbox program database. Just change the names of the folders, .lst and .bin or .dat. Also change the name of the rom inside the .lst editing it with notepad. Ill recomend downloading the database from hyperlist to get the exact rom name.
what if i just wanna download couple roms? full rom torrent sets take space and shit and i just want a couple
Are the ROMs in the Mame fullset usable in this setup?
I don't think so, the MAME romset doesn't launch, only the .bin Naomi/Atomiswave romset does. At least for me on Reicast 0.1 500393a
@@mikejohnson3874 Yeah, just checked the libretro page and it mentions MAME roms are no good. Guess it's time to download like 15 dubious romsets to find some bins ><
OTOH they have the .lst files over there.
Nyaa.si has a full romset of bin/lst
Mike Johnson have a direct link or search criteria to find it? Sorry I’m on mobile. And thanks.
@@mikejohnson3874 When importing the rom sets on those sites only a handful work. It could be bad naming convention, not really sure.
Any other places to get a full compatible rom set?
I hear the bios boot but see nothing on the screen. Thoughts?
cannot find this lst files
Greetings Where do i download the bios??
does it support naomi cd and naomi 2 games
cracrus2 not yet but I’m sure these guys and gals will have it working soon. They have been at it non stop for the last few months and the Emulator has come a long way in that time.
where are the naomi BIOS?
On the internet with everything else.
UPDATE 2019 FIX !!!!!!!!!!!!!!!!!!!!!!!!!
Loading lst files for atomiswave AND Naomi doesn't work anymore! Get the rar mame games and load them through flycast. Enjoy ;-)
Hello, didn't get how right roms does exacltly work ? What means : rar "mame" (?) games ..?
Is there anything special I need to do? I got the zips for demul but they fail to load too
@@jaygreg77 rar is a file extension , mame = arcade games
@@ZakuIIX do they work when u try them in retroach? Make sure u download the flycast core within retroarch!
@@woutervandenbussche8899 I've tryed something else ... Got tips from an other channel; AND i worked, missed the step that you have to add "all" BIOSES and nvRam ... Got some Atomiswave game running but not tested all ... THANKS ... just a precision for some of, you have to add files named with 'list' extension even nor all emulator are working the same way. Hard to find some additional
do no exist Reicast on RetroArch
Please do a tutorial on adding WiiU games to Launchbox and launching on Cemu.
Cemu is just like any emulator in Launchbox, if you've done a few before already. Only difference, with Wii U games.... you wanna make sure you get the "Loadiine" versions only, when you're downloading them off sites, make sure they say Loadiine. Wii U games are basically a folder with other folders inside. In Launchbox, you point the Launcher to the "code" folder and inside is always an .rpx file. Sometimes the RPX file has funny names, like codewords, or sometimes it's the name of the game. You can rename this file if you'd like. Just point Launchbox to that .rpx file and it'll load up like normal. Hope that helps!
Hey guys, how about making a video and showing us how to make this actually work with any formats of Naomi roms? Some of us not as privileged as you are and we have no way of getting proper roms that you have. You are using a properly converted rom set . Try reading comments from others too ones in a while and answer some questions. This will not work with out proper step by step type of a set up. I personally tried step by step that is showed in this video and retro arch fails to open my roms. I have correct list and dat files including bios.
What about redream? Does that work with these as well?
it doesn't work at all ! why ?
Make sure video driver in Retroarch settings is set to gl
hello , i play metal slug 6 use retroarch but it has no sound, how to fix it, already check audio driver sda . xaudio still not working
your retroarch is possibly outdated i had the same problem until i downloaded 1.7.7
A Riduan for som reason when eta does the update he does through retroarch i suggest going directly to the retroarch site and re downloading it
Nice,but can't make it working through RocketLauncher. I guess i'll have to wait for a module update
christophe hocquard just mod your module. Add Sega Naomi and Sammy Atomiswave. I did it and works flawlessly.
It's pretty simple, just add these names to the retroarch core in supported system at the beginning of the ahk information and a little below. And like always point to the core in the module settings.
thanks man. But i tried this before and it doesn't work
i added this to supported system for Sammy in supported system: Sammy Atomiswave|reicast_libretro
Am i right?
I figured it out : Sammy Atomiswave|libretro_reicast|reicast_libretro
will this run on ps vita or PC only
help!!! we need .lst romset
i found it!!
nyaa.si/view/1087632 - naomi
And search here the Atomiswave Romset
@@alvarovericat7913 are you still using this roms with retroarch flycast core??
@@alvarovericat7913 Thank You!
Running Terrordrome on Mame android please or rasp 3/4 !!! ♡♡♡
Also Deathsmiles...
And if you can have a image retroarch or recalbox who is already ok for Rasp 4,4go (but in video output gpio in 15 khz or better in vga 640x480p,it's for a arcade jamma adaptor),thanks a lot...I will be happy.
I know exactly how to do it if u need help feel free to ask👍
so difficult
sammy edition for atomiswave roms www.mediafire.com/file/ikf2m9aafvsz4ki/Atomiswave.rar/file
Where are the Naomi ones
naomi works but atomiswave doesn't
use demul its better