Great video. Thanks for it. I have one question. Is it possible to use a dado blade set with this saw? Does it have enough space for a set of dado blades? Thanks in advance.
Great video, I have a Dewalt DW745. has an equivalent price and the great advantage of the gear fence, it is not necessary to unlock the fence for further measurements. This is sensational and cuts are always accurate. The durability of the DW745 is also excellent, years of trouble-free use.
I'd love to have one, loving its rack and pinion gliding fence system. Sadly the DW745 was not available in Thailand. The GTS10J is however very sturdy, very portable yet offering a highly precise cut. Not regret buying this Bosch job site model despite a little bit play on its fence system.
좋은아이디어 감사합니다 솜씨가 정말 정말 좋으시네요.... 1500X600 사이즈로 만들어 보고 싶은데 다리가 흔들리거나 하진 않을까요? 예를 들어 사람이 올라간다던지... 휴대용 작업대 겸 우마사다리 대용으로 쓰고 싶습니다 칫수 링크 오류 나던데 재업 해주시면 감사하겠습니다
저도 보쉬 테이블쏘를 쓰고 있는데 톱날을 오늘 처음 교체 하려고 너트를 풀려고 하는데 안풀리네요 영상보니깐 회전반대방향으로 잠그시던데 너트를 풀때 톱날 회전방향으로 풀어야 되나요? 센타에 물어보니 회전반대 방향으로 돌려서 풀라고 해서요...알려주시면 감사하겠습니다~~영상 항상 잘보고 있습니다^^
The T-slot track opening is 16.42mm wide at the throat. The throat lugs are 3mm thick. The internal track width is 21.1mm so far too sloppy for any standard 3/4 inch track runner accessory even if you did mill the throat away so it was a trough rather than a T-slot. (Note the bottom of the T-slot is also profiled with ledges on the base of the T slot so depth at throat is 0.9mm greater than depth under lugs). The runner under the OEM angle gauge is a T shape with 20.0mm wide bottom section 6.94mm thick and top section 16.04mm wide and mm edges. One solution is a sled with hardwood runner. I use a waxed oak strip about 16.2mm wide and 7.0mm deep. No significant dimensional change evident in runner strip within the climatic variation evident in my garage in 5-30 deg C temperature range and relative humidity range 54-78% through summer into winter. An option I have yet to develop is using a 20mm wide metal strip 5mm thick running in the running in the T-slot with a metal "packer" strip say 15mm wide 3mm thick screwed on to the runner fill the gap caused by the 1.4 mm wide throat of the T-slot. Little tolerance for rough handling by accidental bending of Al strip so hardwood may be quickest solution.
Great review! You highlighted it's great and not so great features. Thanks 👍 Just got to save up for one now😎
Thank you for watching.
Have a nice day
좋은 영상 잘 보았습니다. 지금도 10j냐 10xc냐 결정을 못하고 있네요. 어짜피 확장테이블은 자작할 예정인데 그러면 그냥 10j로 가도 비용 절약도 되고 좋을 것 같은데 기왕 사는거 신형으로 가야 되나 싶기도 하고...하...
네 그러시죠
저도 고민많이 하다가 아직 초보인지라
좀더 숙달되면 업글하려고 일단 브랜드 있는것 중에 제일싼걸로 질렸습니다. ㅎㅎ
관심 가져 주셔서 감사합니다 ^^
영상 최고. 감사합니다.
시청해주셔서 감사합니다.
좋은 저녁시간 되세요 ^^
¡Muy acertado poner el guante negro detrás de los objetos para permitir apreciar mejor las formas!.
¡Gracias por la demostración!.
Thanks
Have a nice day
The explanation is good.thank you.
Thank you for watching.
Have a nice day
@@leemaker6801 thank you.
Great video. Thanks for it. I have one question. Is it possible to use a dado blade set with this saw? Does it have enough space for a set of dado blades? Thanks in advance.
Thank you for watching.
Have a nice day
Bosch GTS ... Best in his class now. 💪🏽👏🏼👏🏼👏🏼
Thank you for watching.
Have a nice day
جناب یہ کٹر مشین پاکستان میں کہاں پہ کتنے کی ملے گی
오늘 구매했습니다 ~ 개봉전인데 설레이네요 ~ 구독도 하고 갑니다 :)
구독 감사합니다.
안전목공 하세요 ^^
가격은 얼마에 구매하셨나요
가격은.얼마예요?
02W
212085370326
Bosch is a wonderful brand Company &
Very very very good ☺️👍👍👍🎉🎉🎉
What will be the cost of it ? It's made in India?
이 제품을 고민하던 분들에겐 소중한 영상이 되겠네요 이격과 단차가 있는 부분도 체크해주시고^^ 이유없이 댓글로 욕하는 쓰레기는 신경쓰지 마십시오 좋은영상 잘봤습니다!!
한동안 기분이 우울했는데
님 댓글보니 힘이 나네요 ㅎㅎ
좋은글 감사합니다 ^^
즐거운 휴일보내세요 ~
Very useful and good looking machine
Thank you for watching.
Have a nice day
Quanto custa um preciosidade dessa em e excelente
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
@@leemaker6801morning
Great video, I have a Dewalt DW745. has an equivalent price and the great advantage of the gear fence, it is not necessary to unlock the fence for further measurements. This is sensational and cuts are always accurate. The durability of the DW745 is also excellent, years of trouble-free use.
The DW745 is a good table saw.
I also like DW745.
Thank you for leaving a comment.
Have a nice day.
I'd love to have one, loving its rack and pinion gliding fence system. Sadly the DW745 was not available in Thailand. The GTS10J is however very sturdy, very portable yet offering a highly precise cut. Not regret buying this Bosch job site model despite a little bit play on its fence system.
DW745 has a smaller blade, which is unfortunate
gts10j 에 쓸수 있는 간단한 테이블이나 영상 있으신지 궁금합니다. 이제 막 설치해야 하는데 받침대를 만들어야 하는데 정보를 찾아봐도 없더라구요 ㅜㅜ
시청해주셔서 감사합니다.
말씀하신데로 아직 받침대는 못만들었습니다 ㅠㅠ
Керемет👍👍👍 бағасы қанша тұрады .🇰🇿🇰🇿🇰🇿
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
Very excellent design machine..
Thank you for watching.
Have a nice day
저도 이제품사용하고있습니다
스위치2차에서 선빼서 콘센트하나달고
거기에 톱밥전용 청소기 장착해서 사용중인데 해보세요 편리하고 좋아요
청소기 따로 온 오프 할필요없으니^^
아..
그런방법이 있었네요
좋은 아이디어 이네요
한번시도 해봐야겠습니다
좋은정보 감사합니다 ^^
this machine can cut the steel ??
From where can I get it
공구의 발전은 어디가 끝인지 모르게
계속적 업그레이드 되어가는군요
신 개발상품을 찾아 제공하여 많은 도움과
정보를 주신 당신께 엄지척 👍
시청해주셔서 감사합니다.
즐거운 하루 되세요 ^^
How much does one set cost?
exelente video,gracias
Thank you for watching.
Have a nice day
보쉬테이블소 최신형 가격과 기능이 궁굼합니다.
안전을 위해 장갑을 벗는다는게 인상적이네요.
시청해주셔서 감사합니다.
좋은 하루 되세요 ^^
장갑털이나 실이 말려들어가 손이 같이 빨려 들어간다는 이야기가 있습니다. 보통 목수들이 정밀 기계만질때 그래서 장갑 벋고하세요
Bosch company woodwork toll number one quality world👌👌👌👌👌🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳
Thank you for watching.
Have a nice day
Good review.💪👍👍
cuales son las medidas de esta maquina ,sin la extension?
Nice cutter
Thank you for watching and have a look other uploads. Lots of fun!
좋은아이디어 감사합니다
솜씨가 정말 정말 좋으시네요....
1500X600 사이즈로 만들어 보고 싶은데 다리가 흔들리거나 하진 않을까요?
예를 들어 사람이 올라간다던지...
휴대용 작업대 겸 우마사다리 대용으로 쓰고 싶습니다
칫수 링크 오류 나던데 재업 해주시면 감사하겠습니다
Hay. I from Bangladesh .how mush many this machine? Place give me answer. Thank you
BOSCH TABLESAW
Model No. GTS10J
The amount I purchased to use is $ 390.
This is the amount purchased in Korea.
Thank you.
Have a nice day
I am from Nagaland India. Can you please tell me the price and how to buy this table saw. I like it👍👍
BOSCH TABLESAW Model No. GTS10J The amount I purchased to use is $ 390. This is the amount purchased in Korea. Thank you. Have a nice day
Ei machine e Kato inch wide wood section possible?
Can cut up to 45 cm.
구매방법이없어요
Its great , my i know the size of cutter and price please ,
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 450. This is the amount purchased
in Korea. Thank you. Have a nice day
6204874322
👍👍👍
초보도 조립할수 있을까요?
넘 갖고싶은데~~
네 가능합니다.
조립은 그리 어럽지않습니다.
영상보면서 천천히 따라해보시기 바랍니다.
감사합니다.
멋저요
시청해주셔서 감사합니다.
i love it!!!
Thank you for watching.
Have a nice day
Can u tell me the price of this table saw in pakistan
شكرا لك اخي الكريم علي هذه الإفادة
Thank you for watching.
Have a nice day
The best...👍👍👍❤️
This machine can be purchased from food, plz tell me I am from India, can I get this machine much, please tell sir.
조금만 나무 자르긴 좋아보이네요.
다만 참고하실점이 4×8 사이즈 합판 재단할때에는 기계 자체가 작고 조기대도 짧아서 각이 자꾸 틀어집니다.
아마도 별도의 조기대를 설치하고 작업해야 4x8 합판 재단하실수 있을겁니다
네 말씀하신데로 4x8 짜리원판 재단은
힘들더라구요
그래서 저는 원판은 다루기 좋은 사이즈로 충전원형톱으로 먼저 가재단해서 사용하고 있습니다.
좋은 의견 감사합니다.
즐거운 하루 되세요 ^^
Beauteful! Amazing its m'y Dream tank you.
Thank you for the advice.
Have a nice day
Can u tell me the price of this table
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 450. This is the amount purchased
in Korea. Thank you. Have a nice day
저도 보쉬 테이블쏘를 쓰고 있는데 톱날을 오늘 처음 교체 하려고 너트를 풀려고 하는데 안풀리네요
영상보니깐 회전반대방향으로 잠그시던데 너트를 풀때 톱날 회전방향으로 풀어야 되나요?
센타에 물어보니 회전반대 방향으로 돌려서 풀라고 해서요...알려주시면 감사하겠습니다~~영상 항상 잘보고 있습니다^^
시청해주셔서 감사합니다.
회전방향으로 풀어야 풀립니다.
회전반대방향으론 잠기는것이구요
너트 입장에서 보면 회전반대방향으로 잠겨줘야 톱날이 회전할때 더 단단히 잠기겠죠
참고 하시기바랍니다.
전동회전하는 제품들 모두 그렇죠.
선풍기 날개 잠금도 그래요.
회전으로 나사 풀리면 안 되니까.
I have the same saw , can you please do an adjustment video
Thank you for watching and have a look other uploads. Lots of fun!
Yar ye mujhe b chaheye aor iss ka rat kya ha
큰돈들인 새 장비 개봉 씐나~
시청해주셔서 감사합니다.
👌
Máy cắt bàn này ở VN có ko bạn
What is the name of the wood used at the end
Thank you for watching.
Have a nice day
Классный инструмент
Thanks Have a nice day
Trimakasih sangat menginspirasi
Onde comprar ,qual o preço
I also use this model too, i love it
Thank you
Nice to meet you too.
@@leemaker6801 you made a nice VDO
In Indian rupees
How much is the price?
where is the best place to buy tools in korea?
You can search in the Google site of Korea.
Thank you.
does it accept dado stack
In what country this machine made
Thank you for watching.
Have a nice day
예전엔 사고 싶었는데, cnc재단 맡기는데 시간절약!
부럽습니다.
정확한 치수 얻을수 있겠네요..
관심가져 주셔서 감사합니다. ^^
The same German bosch?? Where can i buy in Kenya?
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
How much tish products?
What is the cost of this machine? Is available in India?
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
Cost and availability in India??
Guardntee, warrenty, services facilities??
Availability of India made if there is?
👍
Thank you for watching.
Have a nice day
Hi can you tell me the price of machine and it can be available in nepal
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 450. This is the amount purchased
in Korea. Thank you. Have a nice day
How i wel bay dhes mashin
가격은 얼마나 할까요?? 2020년기준
현재 가격은 인터넷에 검색 해보시면 나올겁니다.
시청해주셔서 감사합니다.
Is it available in india
Very good
Qual o preco dessa maquina. ?
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
Nice
How much can be found in Bangladesh
👍👍👍👍👍👍👍👍
Thank you for watching.
Have a nice day
컷팅최대두께는요?
구입한지 좀 되어 기억이 잘안나네요 ㅠㅠ
인터넷에 모델명검색 해보시면
상세 스펙 나올듯합니다.
참고하시기 바랍니다.
감사합니다.
Best video👍👍👍
Thank you for watching.
Have a nice day
How much is prize of this
good machine
Thank you for watching.
Have a nice day
Wonder why Bosch designed a non-standard slot in their table saw deck casting? Solutions
The T-slot track opening is 16.42mm wide at the throat. The throat lugs are 3mm thick. The internal track width is 21.1mm so far too sloppy for any standard 3/4 inch track runner accessory even if you did mill the throat away so it was a trough rather than a T-slot. (Note the bottom of the T-slot is also profiled with ledges on the base of the T slot so depth at throat is 0.9mm greater than depth under lugs). The runner under the OEM angle gauge is a T shape with 20.0mm wide bottom section 6.94mm thick and top section 16.04mm wide and mm edges. One solution is a sled with hardwood runner. I use a waxed oak strip about 16.2mm wide and 7.0mm deep. No significant dimensional change evident in runner strip within the climatic variation evident in my garage in 5-30 deg C temperature range and relative humidity range 54-78% through summer into winter. An option I have yet to develop is using a 20mm wide metal strip 5mm thick running in the running in the T-slot with a metal "packer" strip say 15mm wide 3mm thick screwed on to the runner fill the gap caused by the 1.4 mm wide throat of the T-slot. Little tolerance for rough handling by accidental bending of Al strip so hardwood may be quickest solution.
Thank you for watching.
Have a nice day
How much does this product cost
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 390. This is the amount purchased
in Korea. Thank you. Have a nice day
How much it cost?where can I order?
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 450. This is the amount purchased
in Korea. Thank you. Have a nice day
bela ferramenta
Thank you.
Have a nice day
@@leemaker6801 bom dia ficou muito mesma
Please let me know the cost and delivery time
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 550. This is the amount purchased
in Korea. Thank you. Have a nice day
BOSCHのtablesaw欲しい。
Thank you for watching.
Have a nice day
Price in pakistan .and where from we buy it.
nice divaice, i want to by it, and where get, price
What is the price
I need this product
Thank you for watching.
Have a nice day
구입가격대가 얼마인지요?
Excellent
Thank you for watching.
Have a nice day
how many price for this machen?
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 550. This is the amount purchased
in Korea. Thank you. Have a nice day
Good
Price please I want to buy it
How much this cost sir please reply
Thank you for watching and have a look other uploads. Lots of fun!
검색해보니 똑같은 모델로 40 만원 80 만원 검색되는데 얼마주고 사신건가요?
43만원정도 했던것 같습니다^^
@@leemaker6801 가격차이가 왜이렇게 날까요?;;; 80만원짜리 살뻔했거든요;;
@@user-cd5fq6oz6s 글쎄요 저도 살때 그부분이 궁금했던것 같습니다. ㅎㅎ
오 혹시 구매는 어디서 하시나용
لو سمحت ممكن السعر ومتوفر في اي مكان والكهرباء كام
BOSCH TABLESAW Model No. GTS10J
The amount I purchased to use is
$ 460. This is the amount purchased
in Korea. Thank you. Have a nice day
Gostei máquina muito boa 👍👍👏
Thank you very much.
Máy này tầm bao nhiêu tiền nhỉ?
BOSCH TABLESAW Model No. GTS10J The amount I purchased to use is $ 390. This is the amount purchased in Korea. Thank you. Have a nice day
Mantap
Thanks Have a nice day
Is this machine made in taiwan? Or china
It is made in China.
Made in china. Is this the original bosch? Im here in korea and im planning to buy it online at coupang
Yes original bosch
@@leemaker6801 thank you for the information. I ordered now. It cost 505, 000won.