Beautiful piece Tanya! Just a thought.......The tree is beautiful when it is alive. By turning and finishing the dead wood we bring it back and it lives again. And you did it! Great work! Be Safe...
Thank you so much, Jeff! I have seen any like this until now. It is one of those pieces you can't stop staring at. Have a blessed weekend! Take care, Tanya 😊
Thank you so much, Clive! It turned out so much better than I expected. Still have to buff it and remove the tenon. Can't wait to share those pics. Have a blessed day! Take care, Tanya 😊
Thank you so much, Rob! I am blown away with the number of curls in this piece. Some of the most beautiful wood I have worked with. Have a blessed day! Take care, Tanya 😊
Hi 👋, Tanya, I hope you are both keeping safe and well, That was a amazing peace ☮️ 😂, of wood turning, the grain looks amazing, I no the camera doesn’t give it justice, as I have machined, literally tens of thousands of pounds worth of Maple another type of wood, I worked for walkers organ building company in the 90s and early 2000s, making pedal boards and pedal sticks to go in the paddle boards, wooden pipes, et cetera, and of course it is all part of nature, something conduct, quite boring at one piece of board and you go three or 4 foot down the length of the board and it can look amazing, a great looking platter, stay safe, I look 👀 forward to seeing your next project, next Thursday, same time same place, 😂, Phil from the moulin France.
Thank you so much, Phil! That sounds like a very interesting job. It always amazes me when you run into that with wood. Have a blessed weekend! Take care, Tanya 😊
Nice platter and that is some beautiful wood! Had a neighbor cut down a 42" diameter poplar that I unfortunately didn't get any of and by the pics made of it it would have made some beautiful pieces. It all wound up in the landfill. Keep turning these pieces as they look amazing!
Thank you so much, George! It is sad it went to a landfill. This is some of the most prettiest wood I have turned. Have a blessed day! Take care, Tanya 🤗
I changed the word I wanted to start 5 times now. The word I’ve been looking for is STUNNING! Absolutely beautiful piece is wood. You did a fantastic job of releasing the beauty. I would only question the resin, as you did. I thing with shavings or even coffee grounds may have been better. No matter. Any prettier and you’d have to hide it away. Great work on this stunning piece.
Poplar is just sooooo beautiful - I hope you get a piece of Poplar burl to turn sometim it cuts lovely and such beautiful figure! Beautiful bowl Tanya - hope all is well with you - look forward to your next one!
Thank you, Paully! I hope I can get some of that as well. I am doing very well. Thank you for asking! That means a lot. Have a blessed weekend! Take care, Tanya 😊
Thank you so much, Ronnie! It sure does. I will be posting the finished pics here in a bit, so please check out my community tab. Have a blessed day! Take care, Tanya 😊
Thanks for sharing Girlie.. Such a beautiful piece.. I can only turn about 11 inches across. Perhaps one day I'll move up to a larger lathe.. God Bless. Full View and Like..
That lathe is getting pretty old by now. I'm sure you could buy a bigger new one and sell me that used one now😅😅😅. Great turn as usual Awesome blank with amazing figure.
It is getting old, so I definitely need to upgrade. Better make room for the rikon70-3040.....lol! I think this beast will treat me right for many, many years. In the case I ever upgrade, you get first dibs. Have a blessed weekend! Take care, Tanya 😊
Thank you, Nik! I wasn't at first, but the more Poplar I turn, the more I like it. I absolutely love this rikon. It is so quiet and smooth. It makes turning even more enjoyable. Have a wonderful day! Take care, Tanya 😊
O Tanya what a gorgeous piece how much bigger are you going to turn I have just turned a 18 inch by 4 inch bowl can not go any bigger how about you xxx
Thank you so much, Charlie! This one started out as a 17" blank, now it's around 16". With the rikon, I can turn 23 ⁷/32" with bed closed, 31 ¼ with bed opened. Have a blessed day! Take care, Tanya 😊
Very nicely done, I just love that grain. Thank you for sharing your video. I was wondering if I could ask a question. Do you have an email address that I could send the question to?
Beautiful piece Tanya! Just a thought.......The tree is beautiful when it is alive. By turning and finishing the dead wood we bring it back and it lives again. And you did it! Great work! Be Safe...
Thank you so much, Mike!
I like that thought!
Have a blessed day!
Take care,
Tanya 😊
The camera never captures how awesome things look when you're all done. Projects Looks Great.
Thank you so much!
Totally agree 👍🏻
Have a wonderful day!
Take care,
Tanya 😊
I’ve never seen Poplar that looked like that. Beautiful job on the platter Tanya.
Thank you so much, Jeff!
I have seen any like this until now.
It is one of those pieces you can't stop staring at.
Have a blessed weekend!
Take care,
Tanya 😊
You're right Tanya. beautiful piece of wood! Let the character shine. Oh yeah, great platter!
Take care, Dave
Thank you so much, Dave!
I hope you have a blessed day!
Take care,
Tanya 😊
Beautiful platter Tanya
Thank you so much, Glenn!
Have a blessed day!
Take care,
Tanya 😊
Well Mrs.B. Another home run! You may have had doubts but keeping it simple with a bead to draw the eye into the piece..beautiful. Keep safe . C.
Thank you so much, Clive!
It turned out so much better than I expected. Still have to buff it and remove the tenon. Can't wait to share those pics.
Have a blessed day!
Take care,
Tanya 😊
Simply gorgeous!! The character of the platter is amazing. God Bless!!
Thank you so much, Laurie!
Have a blessed weekend!
Take care,
Tanya 😊 🤗
Love the platter!
Thank you, kiddo 😘
WOW! Nothing better than a great piece of wood on the lathe. Hang in there and keep up the great work.
Thank you so much, Monty!
Have a blessed day!
Take care,
Tanya 😊
Gosh, the grain is fantastic!!! A very pretty platter.
Thank you so much, Jane!
It is one of the most beautiful pieces of wood I have turned so far.
Have a blessed day!
Take care,
Tanya 😊
Beautiful platter Tanya. You are right. The wood is gorgeous. Take care. 😊😊😊
Thank you so much, Rob!
I am blown away with the number of curls in this piece. Some of the most beautiful wood I have worked with.
Have a blessed day!
Take care,
Tanya 😊
OH my OH my Tanya!! That is absolutely gorgeous. Fantastic content and thank you so much for sharing. Awesome lathe!!😊
Thank you so much!
Have a wonderful day!
Take care,
Tanya 😊
Beautiful wood Tanya! Really takes an exceptional finish!! Such unusual character on this platter! Really a difficult blank to find anywhere again!
Thank you so much, Joe!
It definitely has unusual character.
Totally agree this is a once in a life piece.
Have a blessed weekend!
Take care,
Tanya 😊
Very nice turn!
Thank you so much!
Have a blessed weekend!
Take care,
Tanya 😊
That cane out beautiful. Yes I like the bead you added.
Thank you!
I am so glad you like it.
Have a wonderful blessed weekend!
Take care,
Tanya 😊
Looks good, Tanya.
Thank you, Brad!
Have a blessed weekend!
Take care,
Tanya 😊
Hi 👋, Tanya, I hope you are both keeping safe and well, That was a amazing peace ☮️ 😂, of wood turning, the grain looks amazing, I no the camera doesn’t give it justice, as I have machined, literally tens of thousands of pounds worth of Maple another type of wood, I worked for walkers organ building company in the 90s and early 2000s, making pedal boards and pedal sticks to go in the paddle boards, wooden pipes, et cetera, and of course it is all part of nature, something conduct, quite boring at one piece of board and you go three or 4 foot down the length of the board and it can look amazing, a great looking platter, stay safe, I look 👀 forward to seeing your next project, next Thursday, same time same place, 😂, Phil from the moulin France.
Thank you so much, Phil!
That sounds like a very interesting job. It always amazes me when you run into that with wood.
Have a blessed weekend!
Take care,
Tanya 😊
Great looking platter, good job. Like the wood
Thank you, Vern!
Have a blessed weekend!
Take care,
Tanya 😊
Nice platter and that is some beautiful wood! Had a neighbor cut down a 42" diameter poplar that I unfortunately didn't get any of and by the pics made of it it would have made some beautiful pieces. It all wound up in the landfill. Keep turning these pieces as they look amazing!
Thank you so much, George!
It is sad it went to a landfill. This is some of the most prettiest wood I have turned.
Have a blessed day!
Take care,
Tanya 🤗
Very cool looking!
Thank you, Laura!
Have a blessed day!
Take care,
Tanya 😊
I changed the word I wanted to start 5 times now. The word I’ve been looking for is STUNNING! Absolutely beautiful piece is wood. You did a fantastic job of releasing the beauty. I would only question the resin, as you did. I thing with shavings or even coffee grounds may have been better. No matter. Any prettier and you’d have to hide it away. Great work on this stunning piece.
Thank you, Doug!
Have a blessed weekend!
Take care,
Tanya 😊
Poplar is just sooooo beautiful - I hope you get a piece of Poplar burl to turn sometim it cuts lovely and such beautiful figure! Beautiful bowl Tanya - hope all is well with you - look forward to your next one!
Thank you, Paully!
I hope I can get some of that as well.
I am doing very well. Thank you for asking! That means a lot.
Have a blessed weekend!
Take care,
Tanya 😊
That is a fantastic piece of wood. I know it looks better in person.
Thank you so much, Ronnie!
It sure does. I will be posting the finished pics here in a bit, so please check out my community tab.
Have a blessed day!
Take care,
Tanya 😊
Bom dia Tanya
É incrível como cada projeto fica diferente. Lindíssimo trabalho, parabéns.
Forte abraço
São Paulo - Brasil
Thank you so much, Valter!
Have a blessed day!
Take care,
Tanya 😊
Hugs from the USA
Beautiful piece have a great weekend ✌️
Thank you so much!
Have a great weekend as well.
Take care,
Tanya 😊
Looks great.
Thank you, Walt!
Have a blessed weekend!
Take care,
Tanya 😊
Nice
Nice platter! The spots,I think are sugar spots.
Thank you so much, Rory!
Sugar spots are awesome. Kinda is a sweet platter.🤭
Have a blessed day!
Take care,
Tanya 😊
Great job as usual! Beautiful platter!
Good morning!
Thank you, John!
Have a wonderful day!
Take care,
Tanya 😊
Thanks for sharing Girlie.. Such a beautiful piece.. I can only turn about 11 inches across. Perhaps one day I'll move up to a larger lathe.. God Bless. Full View and Like..
Thank you so much, Allen!
I hope you have a wonderful week!
Take care,
Tanya 🤗
That lathe is getting pretty old by now. I'm sure you could buy a bigger new one and sell me that used one now😅😅😅. Great turn as usual
Awesome blank with amazing figure.
It is getting old, so I definitely need to upgrade. Better make room for the rikon70-3040.....lol! I think this beast will treat me right for many, many years. In the case I ever upgrade, you get first dibs.
Have a blessed weekend!
Take care,
Tanya 😊
Not usually a fan of poplar, but that grain is exquisite. Nice piece, Tanya. How's the Rikon working out?
Thank you, Nik!
I wasn't at first, but the more Poplar I turn, the more I like it.
I absolutely love this rikon. It is so quiet and smooth. It makes turning even more enjoyable.
Have a wonderful day!
Take care,
Tanya 😊
O Tanya what a gorgeous piece how much bigger are you going to turn I have just turned a 18 inch by 4 inch bowl can not go any bigger how about you xxx
Thank you so much, Charlie!
This one started out as a 17" blank, now it's around 16".
With the rikon, I can turn 23 ⁷/32" with bed closed, 31 ¼ with bed opened.
Have a blessed day!
Take care,
Tanya 😊
Very nicely done, I just love that grain. Thank you for sharing your video. I was wondering if I could ask a question. Do you have an email address that I could send the question to?
Thank you so much, Mark!
I do it's in the video description. My email is tsbecher745@gmail.com
Have a blessed weekend!
Take care,
Tanya 😊
Beautiful platter Tanya
Thank you, Tim!
Have a blessed weekend!
Take care,
Tanya 😊