Hi, congratulations on your video. I have the same drill failure. When I press the switch the drill does not react as in your video. The rotor and stator are working. Can there be a problem in the capacitor? Thanks
Thank's for the vid. My machine has the same signals as yours and does not run. Unfortunately I can't exactly see in your video, where the exact problem was and what you did to run it again. Some exchange of peaces?
HI Thanks for the video, I have a very similar Metabo SbE 1000 which appears to be slightly older. the brush configeration is significantly different as there are no wires directly connected to the brushes but connects via a brass ring, the brush housing is of brass and rectangular. i cannot find a way of removing the brush housings to replace the brushes. do you have any idea please? Much appreciated.
It's an older machine, maybe you can find one by searching for parts on the internet or looking for a broken machine with a good switch and then swap the switch. Good luck
Hi, what kind of product are you blowing into the switch ?
It is WD 40. Good luck
Hi, congratulations on your video.
I have the same drill failure. When I press the switch the drill does not react as in your video. The rotor and stator are working. Can there be a problem in the capacitor?
Thanks
thank you, if the stator and rotor are good, maybe the switch/speed regulator unit is not working or the brushes are worn out. good luck
My friend congratulation !!! 👍
thank you
Is it a 1000 rpm and 3000 rpm speed drill machine
This machine has a speed controller and low and high gear, it's a 3000 rpm. Good luck
Thank's for the vid. My machine has the same signals as yours and does not run. Unfortunately I can't exactly see in your video, where the exact problem was and what you did to run it again. Some exchange of peaces?
Cleaning was this time enough to let it run again. good luck
what do you clean the collector ?
sandpaper
the commutator yes. good luck
HI Thanks for the video, I have a very similar Metabo SbE 1000 which appears to be slightly older. the brush configeration is significantly different as there are no wires directly connected to the brushes but connects via a brass ring, the brush housing is of brass and rectangular. i cannot find a way of removing the brush housings to replace the brushes. do you have any idea please?
Much appreciated.
Maybe you can search by machine number for schematics, I hope you find something. Good luck
Hai,maybe you can help,I am looking for the switch on off to my SB edv 1000 same as yours,can you help where I can get it?thank you
It's an older machine, maybe you can find one by searching for parts on the internet or looking for a broken machine with a good switch and then swap the switch. Good luck
Yo vivo en guasimo limón Costa Rica me gustaría aprender más sobre erramientas
Thanks 🇮🇩
😉👍
Faltan mas primereros planos.detalles.