Very helpful video. Please add more information about the detailed settings for engraving. Also if you could provide an acronym list for these functions. I'll be watching for more videos. Thank you!
Thank you for the very thorough video tutorial. It's a bit too detailed on a few occasions for my taste, but the chapters help a lot where to find the relevant information. Maybe you could do another tutorial how to combine engraving and cutting in one go. Although I think my LP2 is not really suited for cutting most materials (I only got it to cut with very thin wood).
Vielen Dank für das tolle video, ich habe eine Frage, ich nutze einen LP und habe in der Software zur Bildbearbeitung den Punkt "Bitmap copying" nicht gefunden. Was muss ich tun, damit diese Funktion angezeigt wird ?
May I know if there will be smoke if I engrave stainless steel with IR 1064nm laser? Btw this video is helping me to know how to engrave perfect image. Thank you
Thank you for the informative video When I open design space I do not have the blue or red rectangles in mine. Also, is there any way to "send to back" if you have one item on top of another?
Thank you for your appreciation! Regarding the absence of blue or red rectangles in Design Space, did you remove the lens lid? Or it may depend on the version or settings of the software. Make sure you're using the latest version and check Design Space's online guide for any updates.^^
Enjoyed the tutorial. Sometimes a bit fast and relevancy not always described well. A written tutorial as an adjunct would make referring back to various aspects of the tutorial faster and less tedious than watching the entire video over again.
There are Adobe Illustrator video tutorials, how to set the various drawing layers and the layers for cutting the outline? and then a practical example of the usual cutting file in action with laserpecker 4? I'm also having trouble importing svg files into LaserPecker Design Space. This step would be interesting and fundamental. Thank you
Adobe Illustrator does offer video tutorials on how to set various drawing layers and outlines for cutting. You can find these tutorials by searching for them on Adobe's official website or by visiting their UA-cam channel. As for importing SVG files into LaserPecker Design Space, please ensure that the SVG files are properly formatted and compatible with the software. If you're still experiencing trouble, feel free to contact us, you may want to reach out to LaserPecker's customer support for assistance.☺
Thank you for the excellent video. I have two questions, how fast is the burning? In this video, you showed only x2 (or more) speed, but it would be very nice to know exactly the time needed to perform the same print. The second question is about the smock. Do you have an additional tool to evacuate smoke? What about the smell, and what about the protection (orange) we can see in the picture, do you use it? If not (as we can see) why?
Thank you for your feedback. 😉Our engraving speed is up to 2000mm/s, and we have the protecting shield and the matching air purifier to help absorb the smoke. Because we are shooting a video, we want you to see more clearly, we have the protecting shield and air purifier used in the live stream, ua-cam.com/users/liveGPLi_44-HZg, where you can see how we use it.😃You can start from the 10 minutes.
@@LaserPecker but what is the reason why we can't it makes no sense that was the major buying factor was the trolly feature and nowhere did it say when I spent 1,600 dollars that the feature was not available
why I can't rename layers name? If I copy one, then I get 2 pcs with the same layer-name and after the save and file reloading these pcs are sticked in one place...
We apologize for any inconvenience you're experiencing. If you're unable to rename layers ,there might be a software glitch. Please ensure you are using the latest version of our engraving software. If the problem persists, contact our customer service at support@laserpecker.com with detailed information about the software version and the issue you're facing, and we'll assist you in resolving it.
If the CH340 driver option is not showing up, please ensure that your USB cable is securely connected. If you're still experiencing issues, update your software to the latest version. If you have more problems, feel free to contact us.🥰
Yes, we offer the ability to adjust the font size dynamically based on the length of the text. You can typically find this option within the text editing tools of LaserPecker Design Space.
Vocês poderiam me ajudar a comprar a máquina novamente? tive que devolver porque houve um problema com o laser e tinha pego por um valor menor, agora não consigo comprar com o reembolso porque a laser peck 3 está mais cara.
Lamentamos saber de sua experiência. Entre em contato diretamente com nossa equipe de suporte ao cliente com suas preocupações específicas sobre preços e disponibilidade. Faremos o possível para ajudá-lo a encontrar uma solução adequada.
Hello, I am using LP Design Space in Windows 64 but when I place elements on my canvas, I see and select them without a problem, I can make changes to them, but it is not creating any layers and when I click on Preview, a message appears saying that the current artboard is empty. Can you help me, what should I do?
Hello，dont worry, place the pattern in the frame before you can preview it (there is a percentage value in the lower left corner of the canvas, which represents the size of the canvas. Click to return to the center of the frame), if you have more questions, feel free to ask us!
@LaserPecker We want to be able to cut several hardwood species of solid wood and can surface it to the necessary thickness. But need to figure out the settings. I would like to cut 1/8" Walnut into some ornaments.
@@LaserPecker What is the cut setting for plywood of 0.15cm & 0.3cm? - Which material to choose? - 450 or 1024? - Power? - Depth? - How many passes? I tried 450 and 20 passes but still unable to cut. Pls help. Thanks
Very helpful video. Please add more information about the detailed settings for engraving. Also if you could provide an acronym list for these functions. I'll be watching for more videos. Thank you!
Thanks for the feedback, ^^we will make more changes to these videos in the future!
Looking forward to downloading and giving it a try.
Cool，have a try!😘
Thank you for the very thorough video tutorial. It's a bit too detailed on a few occasions for my taste, but the chapters help a lot where to find the relevant information. Maybe you could do another tutorial how to combine engraving and cutting in one go. Although I think my LP2 is not really suited for cutting most materials (I only got it to cut with very thin wood).
😉We will have a new one very soon.
Please see the description and leave your comments in the comment section.😘
Vielen Dank für das tolle video, ich habe eine Frage, ich nutze einen LP und habe in der Software zur Bildbearbeitung den Punkt "Bitmap copying" nicht gefunden. Was muss ich tun, damit diese Funktion angezeigt wird ?
Sie müssen das Bild auswählen und es auf den Gravurtyp „Dithering“ einstellen. Daraufhin wird die Bitmap-Kopierfunktion angezeigt.
May I know if there will be smoke if I engrave stainless steel with IR 1064nm laser? Btw this video is helping me to know how to engrave perfect image. Thank you
Thank you for the informative video When I open design space I do not have the blue or red rectangles in mine. Also, is there any way to "send to back" if you have one item on top of another?
Thank you for your appreciation! Regarding the absence of blue or red rectangles in Design Space, did you remove the lens lid? Or it may depend on the version or settings of the software. Make sure you're using the latest version and check Design Space's online guide for any updates.^^
Enjoyed the tutorial. Sometimes a bit fast and relevancy not always described well. A written tutorial as an adjunct would make referring back to various aspects of the tutorial faster and less tedious than watching the entire video over again.
Thanks for the feedback, because we try to cover every detail🤣, next time we will make it more tidy and well-organized.
There are Adobe Illustrator video tutorials, how to set the various drawing layers and the layers for cutting the outline? and then a practical example of the usual cutting file in action with laserpecker 4? I'm also having trouble importing svg files into LaserPecker Design Space.
This step would be interesting and fundamental.
Thank you
Adobe Illustrator does offer video tutorials on how to set various drawing layers and outlines for cutting. You can find these tutorials by searching for them on Adobe's official website or by visiting their UA-cam channel. As for importing SVG files into LaserPecker Design Space, please ensure that the SVG files are properly formatted and compatible with the software. If you're still experiencing trouble, feel free to contact us, you may want to reach out to LaserPecker's customer support for assistance.☺
I would appreciate it if you could explain to me how I change the direction of writing. I am from Israel and I need to write text from right to left
Sorry, we can't change the direction of writing right now. We will keep it updated.
Thank you for the excellent video. I have two questions, how fast is the burning? In this video, you showed only x2 (or more) speed, but it would be very nice to know exactly the time needed to perform the same print. The second question is about the smock. Do you have an additional tool to evacuate smoke? What about the smell, and what about the protection (orange) we can see in the picture, do you use it? If not (as we can see) why?
Thank you for your feedback. 😉Our engraving speed is up to 2000mm/s, and we have the protecting shield and the matching air purifier to help absorb the smoke. Because we are shooting a video, we want you to see more clearly, we have the protecting shield and air purifier used in the live stream, ua-cam.com/users/liveGPLi_44-HZg, where you can see how we use it.😃You can start from the 10 minutes.
@@LaserPecker On the laserpecker website it says that it is an engraving speed of 4000mm/s. Is not true?
I was so disappointed that I couldn't use the trolley feature with my laser picker 3
Hello, only LP2 can use trolley mode, we can't use LP3 with the trolley mode.😆
@@LaserPecker but what is the reason why we can't it makes no sense that was the major buying factor was the trolly feature and nowhere did it say when I spent 1,600 dollars that the feature was not available
why I can't rename layers name? If I copy one, then I get 2 pcs with the same layer-name and after the save and file reloading these pcs are sticked in one place...
We apologize for any inconvenience you're experiencing. If you're unable to rename layers ,there might be a software glitch. Please ensure you are using the latest version of our engraving software. If the problem persists, contact our customer service at support@laserpecker.com with detailed information about the software version and the issue you're facing, and we'll assist you in resolving it.
What should I do it the option for CH340 driver does not show up ?? I am using a usb cable to, not sure what to do
If the CH340 driver option is not showing up, please ensure that your USB cable is securely connected. If you're still experiencing issues, update your software to the latest version. If you have more problems, feel free to contact us.🥰
Is there a way to Dynamically change the size of the font size based on text length?
Yes, we offer the ability to adjust the font size dynamically based on the length of the text. You can typically find this option within the text editing tools of LaserPecker Design Space.
@@LaserPecker Where will I find this option? I have looked but can't find it.
Vocês poderiam me ajudar a comprar a máquina novamente? tive que devolver porque houve um problema com o laser e tinha pego por um valor menor, agora não consigo comprar com o reembolso porque a laser peck 3 está mais cara.
Lamentamos saber de sua experiência. Entre em contato diretamente com nossa equipe de suporte ao cliente com suas preocupações específicas sobre preços e disponibilidade. Faremos o possível para ajudá-lo a encontrar uma solução adequada.
Hello, I am using LP Design Space in Windows 64 but when I place elements on my canvas, I see and select them without a problem, I can make changes to them, but it is not creating any layers and when I click on Preview, a message appears saying that the current artboard is empty.
Can you help me, what should I do?
Hello，dont worry, place the pattern in the frame before you can preview it (there is a percentage value in the lower left corner of the canvas, which represents the size of the canvas. Click to return to the center of the frame), if you have more questions, feel free to ask us!
What settings do I need to cut with my LP4? I cannot find any settings to get it to cut any material.
What material do you want to engrave? We have different engraving settings recommendations😉.
@LaserPecker We want to be able to cut several hardwood species of solid wood and can surface it to the necessary thickness. But need to figure out the settings. I would like to cut 1/8" Walnut into some ornaments.
How to use the cut feature?
You can choose "cut" and set the setting in the "engraving layer" on the right.
@@LaserPecker What is the cut setting for plywood of 0.15cm & 0.3cm?
- Which material to choose?
- 450 or 1024?
- Power?
- Depth?
- How many passes?
I tried 450 and 20 passes but still unable to cut.
Pls help. Thanks