The seat for the cannon was designed without studs for a reason. They don't want figs attached by studs anymore cause it causes stress and over time cracks the figs legs.
I really love your videos. unfortunately Iv'e had bad experience with Jonak. Would definitely recommend AVfigures though. they are truly amazing with customer service.
For anyone wondering the printing cloth works. Yes it works basically perfectly although cut it a little bit more on the edge for the holes but it's basically perfect, recommend 👌
Ok I'll use on general div (I have them all names like madman carp and fire:) ) P.s madman is specialist carp is heavy divi is general fire is the other heavy one (they hold there guns differently so ik which one if 'em is carp/fire
@@comeonmang How were they great? the clone gunner and 212th had goofy-looking helmet holes that bulged out and the 212th had a wrong helmet print. While the holes aren't an issue for Cody, he has another big problem in the form of a comically oversized and outdated visor and a printed jetpack.
The paper waist capes and pauldrons look good but maybe you should use index card paper Which is stronger or put a thin layer of tape around them so they dont rip apart
I’ve actually used felt so and made a couple accessories not many just testing it out really i made a hood quite a basic light saber holder with a hole for one piece to hold the hilt and then used some stitching to make another holster which can perfectly fit a lightsaber in it attached to the leg i seriously rate any ways of doing this it’s great
i wached you yesterday one of your old videos and when i saw this i thought you were a totally fulltime 1milloindoller lego youtuber! nice work on the videos!
1:14 Why did you use the DC-17m with the sniper attachment, that was meant for the clone commando, plus the blaster just doesn’t go well with the normal clones.
Damn, almost 300k views! Great video with great ideas! The quality of your videos really improved since the last time I watched your vids (which were these blaster design and cloth videos)
@Jurassiclover2424 click the link in description and it gets the printouts then you just print them and cut them out colour them and put them on the minifigs
A cool idea fore a series: how to improve you’re (clone legion here) where you improve Lego clone legions like the 501st and 212th. In this series you can focus on in improvements of the legions that have unique things fore the legions.(sorry fore my bad English I’m not a native speaker of this language)
Thanks for watching! What was your favorite tip? Will you be using them?
The heavy trooper bomb pack
kamas
Sniper rifle
The seat for the cannon was designed without studs for a reason. They don't want figs attached by studs anymore cause it causes stress and over time cracks the figs legs.
I really love your videos. unfortunately Iv'e had bad experience with Jonak. Would definitely recommend AVfigures though. they are truly amazing with customer service.
For anyone wondering the printing cloth works. Yes it works basically perfectly although cut it a little bit more on the edge for the holes but it's basically perfect, recommend 👌
Ok I'll use on general div (I have them all names like madman carp and fire:) )
P.s madman is specialist carp is heavy divi is general fire is the other heavy one (they hold there guns differently so ik which one if 'em is carp/fire
0:31 The sniper rifle looks very good and most importantly it can be assembled from extra parts!
Woah Woah Woah. This deserves WAAAAAAAAAAAAAAY more than 32 views
It was just uploaded
*14k. 👺👺👺👺
31k
39k
40k
It's awesome to see how much your editing has improved since you were a kid!
Thanks!
Didn’t know this new 501 st set was French, but I dig it! 😂
That shield design looks awesome, I think you did a really fantastic job
Thank you!
I am a follower since 2019, i think, and you are the only one lego youtuber that can make things more simple and accurate.
You can paint or edit on PC to texture lego body parts.
Print to use a sticker for the body
I remember when your first “how to improve” videos came out, you have come a long way with your editing!
How did you cut the little holes? (The paper tent, bag, etc.)
What items do you use to cut the holes
This set honestly feels like a last minute idea/design by Lego.
alot of the clone sets do nowadays barring the og 501st bp and the atte
@@comeonmang not only the clone sets
@@comeonmang I wouldn't quite say the atte. While it did have a great build, the figs were abysmal.
@@marwana4834 huh? cody and the gunner were great. I do understand the dislike of the 212th troopers and lack of crab droid however.
@@comeonmang How were they great? the clone gunner and 212th had goofy-looking helmet holes that bulged out and the 212th had a wrong helmet print. While the holes aren't an issue for Cody, he has another big problem in the form of a comically oversized and outdated visor and a printed jetpack.
I was using that ideas and my clones are much better now, regarding prints I used them with fabric and is very good, thanks for the advices
the paper print-outs were exceedingly helpful, thank you for giving the link I appreciate it!
How do you cut out the holes in the cutouts
The print doesn’t even work
@@Mustercerfbirf it does for me
This will really help me build my clone army ,thank you hope you make more these videos help me a lot
The paper waist capes and pauldrons look good but maybe you should use index card paper Which is stronger or put a thin layer of tape around them so they dont rip apart
Wow this is the most helpful lego upgrade ever!
The micro binocular can be put on the phase 1 helmets
I’ve actually used felt so and made a couple accessories not many just testing it out really i made a hood quite a basic light saber holder with a hole for one piece to hold the hilt and then used some stitching to make another holster which can perfectly fit a lightsaber in it attached to the leg i seriously rate any ways of doing this it’s great
For how old you sound in these videos you make really high quality and useful tutorials(now and when you were a kid you made good videos)👍
Thanks for showing me Jonaktoys, I’ll definitely be using those printed legs to upgrade my figures
You're welcome! make sure to use our code to get 5% off :D
@Sanders3Studios do you know how to cut out the holes without a hole puncher
He is just a Legend!
I found this video very helpful because I picked up this set very recently and felt like it needed improvement.
Glad it was helpful!
I watched some of their other vids and I still use the shield design in my mocs
This looks so cool I hope next time I go to Target I can get the pack and can use these amazing tips. Thanks
gotta be one of the best lego yters
i wached you yesterday one of your old videos and when i saw this i thought you were a totally fulltime 1milloindoller lego youtuber! nice work on the videos!
THE LEGEND IS BACK!!!!!!
Thank you so much, my clones look so trash but now they look like beauty
I tried the tent thing but when I put it on the base plate thing it looked kind garbage how did you make yours look so good?
What pieces did you use to build the controls at 6:21
those legs really make a difference!!
Love all your content
1:14 Why did you use the DC-17m with the sniper attachment, that was meant for the clone commando, plus the blaster just doesn’t go well with the normal clones.
Brilliant! Been waiting for this vid! Nice one
Damn, almost 300k views! Great video with great ideas! The quality of your videos really improved since the last time I watched your vids (which were these blaster design and cloth videos)
Bro he started to put memes in his videos😂 btw the video is so cool
This is perfect. Great improvements!
U could put the blue and white legs on the original piece for it to look even better
You deserve so many more subscribers
Jonak's redeemed royal guards and redeemed Vader minifigs look like they would fit the 501st aesthetic really well too.
Thank you for putting the link in the description these look amazing on my clones
When will you make the 332 clone trooper battle psck
Or in this harry potter set its a carriage and on of the mini figures bring a blue bag just like the on in clone wars
So with those half white and blue legs you could get some decals from jonak and put them over too and it would look awesome!
I used your printouts and made my mini figs 10x better!
@Jurassiclover2424 click the link in description and it gets the printouts then you just print them and cut them out colour them and put them on the minifigs
THE GIGACHADS ARE BACK! AKA the kings of printouts.
You can use the Kama of nya from the Ninjago movie and Flip it around if you don't have any other kama
Can you make a video on how to improve the new 2023 tie bomber
I don't want to make 20$ set into 50$ set but it is all good and the best things I think are custom guns
Been watching your clone improvement videos, really helped a lot, great work!
The regular Lego white rucksack doesn't work with these Clone troopers. The back of the helmet extends too
Epic. It’s quite astounding how much this channel has grown.
The printed arms add so much to the quality of the figures. Really cool
This is really cool bro! I love the print - outs! I work with brickfilms a lot and I think some of these ideas would be sick!!!!
Could you show how you made that brick-built mortar? I cant quite see the bottom half of it while it's on screen
Cool video!😀😧, this figures looks 10 times better!
I’m going to try print out those waist capes!😮😊
Holy cow I’ve been a subscriber for almost a year I think and your editing has insanely improved!!
WOOOOOO!! YEAH BABY, ITS WHAT WEVE BEEN WAITING FOR!! WOOOOO
A cool idea fore a series: how to improve you’re (clone legion here) where you improve Lego clone legions like the 501st and 212th. In this series you can focus on in improvements of the legions that have unique things fore the legions.(sorry fore my bad English I’m not a native speaker of this language)
“How to make your clones look much better!”
**spend your entire bank account**
A masterpiece!
1:59 someone that is so kind that you can give me the link of that article that I can't find it or how to look for it
Someone please tell me the name of the son that plays at 09:03 (and it’s not “dance of the knights”)
So good I improve mine and it’s way better
The clones vs droids battle pack is almost here! We need a video out of it!
thats not flick-fire its a spring loaded cannon 4:25 flick fire is the thing on the war machine hulk-busters left shoulder look it up
This is sick!
Impressive, very nice
Ok so. How tf do I print out the pauldron and Kama designs
i used sharpe on the maco visor thing
I used your kamas, but i coloured them in on my tablet and brinted with colours
Wow cool! that's a good idea!
@@Sanders3Studios drive.google.com/file/d/14_HUN7ETXmRUkFWFFynElJl1zadBokzy/view?usp=drivesdk my designs
hey i know a way to make a brick built obi wan's lightsaber but idk how to send you a video of it
Omg i remember the first one you made and I watched it :)
Love this dude
Lego is taking notes now
Wow you are so good at building
Thanks!
awesome I would love to see more 501st to help my clone army!
thanks so much. i actually used a couple if theese with my sets. i loved the back pack tip
I see you guys Improved a lot
Thanks!
Great video
Epic Video keep up the good work!!!!!!!
Thanks!
@@Sanders3Studios your videos helped me a lot i have given you a shoutout in a video!!!
How to build the complex shield tutorial
What cloth do you use for the kama's?
Ty for prints
There are awesome custom shields for example for Doom Troopers, you should try that :)
I personally improved the set by well. Making the cannon an alternate mode the officer and the specialist's torsos switched. That's it
Thish is so cool!
i love your vids i love it
YOOOOOO, QUALITY OVER QUALITY. Absolutely great video.
The halo 1 pistol
Great tips
Glad you like them!
love the side clothes its free and good looking
better than most vids to improve this set
u deserve more views and attention
How did you manage to cut out the skirt? It ripped when I tried it
I used the white backpack with the bedroll cut off
Very nice 😎
@Sanders3Studios where did you buy the custom guns and visors. like which one of the sites you said in the vid?
It was jonaktoys.com :D Use S3S as a discount code for 5% off
Keep up the good work