Hi , my son has one of these sitting that broke years ago ! My daughter wants one for her paper round . Your video has gave us inspiration to make something of it instead of buying a new one love it and thanks for taking time to show what you have done.
How much more power should the primary controller pull relative to the secondary? I'm going to do this with a 12s system on dual custom batteries with BMS emulation. I might run dual displays to tweak on the fly or have the second motor available when I need it, but maybe not. More for tuning the motor. Where to start in terms of power draw? 30A max Primary motor, 25 secondary?
It might be. Just to get brakes to work right, its an extra 100.00 for the kit to put brakes on either the front or back. 100.00 or so for extra motor. 50.00 or so on eBay for extra controller. Then if you want to have the suspension upgrades you're looking at 350.00 usd for front and back. So somewhere along the lines of 600.00ish for these upgrades if you do them by yourself.
@@hoodoofps show me what $100 motor. Shit every m365 I see that can touch near 30mph looks like a janky death trap. Better to start with something better to begin with
@@Ww8.3 I'm not disagreeing with you but if you already have suspension and steering damper why not go dual motor. Myself I was given a "broken" m365 that just had an undercharged battery so I didn't spend any extra for the motor and controller. I already invested in monorim front and rear suspension myself plus steering damper. I also added a wider custom wooden board for better foot placement and steering.
@@mkfixitscooters308 Forgive me, but with only one dashboard, I have to load the firmware on the 2 escs, even when everything is disassembled. It's not clear to me when I decide to update or change the firmware via bluetooth on the dashboard, with this configuration will it act on both escs? Isn't there a conflict? Thank you
Where did you get the extra data/throttle plug coming from the dashboard? Did you just tear a plug off of an old dashboard harness or do you know what the part is? *(the yellow, white, red, black cable plug.)
just a general question, as a separate thing from your scooters normal controller, battery and motor....couldnt you hook up a battery to a switch/ button and a motor and have a secondary drive system, more simplified and just for longer rides?
GOOD TO SEE YOUR ALDI AND LIDL MAN AND FELLOW SCOOTER LOVER, WELL DONE BUD, SOLDERER FROM LIDL IS A BIT PRICEY ON TIPS? OR HAVE YOU FOUNDSOME CHEAP ? CHEERS
Hello im at he third xiomi . had 2 m365 with both 5500km , my last one it`s a pro 2with 5300km and i am thinking to upgrade the battery to 48v monorim like urs. beside the software, is the controller gonna bee able to handle 48v? at all of them the min/max cell it`s over or reaching 0.025v so basicly useless
Yes you can but you need to install one at a time so unplug data from 1, install then remove cable from the one u just flashed and plug in the second one and flash.
@@mkfixitscooters308 thank you very much, also, can you recomend a motor that will fit in a xiaomi 1S on the back? i dont know if monorim or stock one or what to put
Good evening .. I bought a 500w monorim motor .. I have a Xiaomi pro 2.. I would like to put it on the back .. I have to change the cables .. because I put it and it doesn't start .. thank you
the monprim 48v motor can be used with a 36v battery? pro and cons? I'm asking cos I'd like to make a 2wd with 2x250watt motor, won't fly but may be will have a better range compared to bigger motors
500w would work no real down sides to using them with 36v except it won't be as fast if you was using 48v or higher. 2x 250w motors will provide enough juice with a good cfw
Bonjour, alors j'ai tout ce qu'il faut , faut que en terme de batterie c'est 3 batterie dont celle de la xiaomi pro 2 Après j'ai 2 contrôleur v3, 2 moteur , 52 volt en sortie des batterie Donc est-ce que c'est possible de faire le montage avec cela , et quels est le bon flash à faire , ou le bms de la batterie xiaomi n'est pas un soucis , il reste branché à une carte ou peut-être les 2 ?
Hi dude. Can you help a little? I put everything like you and everything works perfectly. I only have one problem, there is no room for an x-tech brake, very little space is missing. Although as a second engine I have a monorim 350w, is it possible that it is. Maybe it must be the original xiaomi engine?
Hi I’m wondering if your be able to contact me some how I really wanna talk to you I got a 1000w M365 bassicly built I been doing some testing I also have built awd ones but when I’m at high speeds the motor starts to like jerk it’s hard to tell you over text I was wondering if you can help me I also recommend these controller boxes I have used on the M365 fits so nice
Hi , my son has one of these sitting that broke years ago ! My daughter wants one for her paper round . Your video has gave us inspiration to make something of it instead of buying a new one love it and thanks for taking time to show what you have done.
Thanks and we wish you good luck. Any parts feel free to get in touch
Respect from Greece 🇬🇷!!!!!
Very good work!!!!💯👏👏
Where did you find the cable to connect the Dashboard to both controller ?
Is the motors are running in 24 v front and 24v back or both 48v?
So practically u have put Ferrari engine into a Honda
😂😂😂
nice Job dudé keep doing thinks like this
Respect!
How much more power should the primary controller pull relative to the secondary? I'm going to do this with a 12s system on dual custom batteries with BMS emulation. I might run dual displays to tweak on the fly or have the second motor available when I need it, but maybe not. More for tuning the motor. Where to start in terms of power draw? 30A max Primary motor, 25 secondary?
Sorry for such a delay. Your correct around 30 on the front and 25 back is more than enough
Price wise if you buy this scoot and all the upgrades would it be cheaper than just getting say a Kaabo mantis base?
It might be. Just to get brakes to work right, its an extra 100.00 for the kit to put brakes on either the front or back. 100.00 or so for extra motor. 50.00 or so on eBay for extra controller. Then if you want to have the suspension upgrades you're looking at 350.00 usd for front and back. So somewhere along the lines of 600.00ish for these upgrades if you do them by yourself.
@@hoodoofps show me what $100 motor. Shit every m365 I see that can touch near 30mph looks like a janky death trap. Better to start with something better to begin with
@@Ww8.3 I'm not disagreeing with you but if you already have suspension and steering damper why not go dual motor. Myself I was given a "broken" m365 that just had an undercharged battery so I didn't spend any extra for the motor and controller. I already invested in monorim front and rear suspension myself plus steering damper. I also added a wider custom wooden board for better foot placement and steering.
how did you make that front suspension?
This took alot of washers and modifications it is a sharkset kit
whats the battry amigo
Can you make test climbling hills to see the diference ?
Soon we will show you the difference
@@mkfixitscooters308 ??
Is that monorim battery cable a xt60 ? and you made the xt60 to xt30 split cable ? is it available on your site ?
We did make it unfortunately not for sale currently
You only need 1 dashboard? I saw other builds with 2 dashboards, the 2nd one is hidden on the stem.
More mess using the dual screen method
@@mkfixitscooters308 Forgive me, but with only one dashboard, I have to load the firmware on the 2 escs, even when everything is disassembled. It's not clear to me when I decide to update or change the firmware via bluetooth on the dashboard, with this configuration will it act on both escs? Isn't there a conflict? Thank you
@@landscapes3798 you remove the data cable from 1 controller at a time (only 1 is plugged in while flashing) you can't flash 2 at once.
Hey 2 years later is there a better-performing or cheaper battery on the market yet? £200 for the Monorim is stupidly expensive for what it is
@@Edward.44 not that I'm aware of mate. Battery's in general are not cheap unfortunately :(
So, do you connect 2 controllers with one battery?
@Motorcycle_shorts yes that's correct
Dobro very nice your scooter my friend 👌🇭🇷
Thanks bro
Do you think you can manage to keep the rear light working ?
Yes you can use a wireless LED or you can wire the LED to work from either controller using the bms line
@@mkfixitscooters308 where can you connect it ?
@@raphael5067 you can measure from the plug on the main motherboard where you originally connect the wires (plug) from the bms/battery while braking
Ground and L pin of controller (bms connector plug)
Where did you get the extra data/throttle plug coming from the dashboard? Did you just tear a plug off of an old dashboard harness or do you know what the part is? *(the yellow, white, red, black cable plug.)
We build them cables our self and sell them
@@mkfixitscooters308 can you please send me the cable for 2 controllers?
@@bojanvarga5035 yes sorry if still needed
did you use the one dashboard panel and one throttle on 2 controllers?
Yes sir
@@mkfixitscooters308 thanks
What is your bms ? I dont see connection beatween battery and esc card.
just a general question, as a separate thing from your scooters normal controller, battery and motor....couldnt you hook up a battery to a switch/ button and a motor and have a secondary drive system, more simplified and just for longer rides?
Yes this was just more work for a simple build and did not want to make it any harder to install
Where to find paraller controler cable?
Sorry you could contact us directly and we can sell
مرحبا متابعك من العراق
Can you run 2 battery’s with this set up ?
Yes certainly
GOOD TO SEE YOUR ALDI AND LIDL MAN AND FELLOW SCOOTER LOVER, WELL DONE BUD, SOLDERER FROM LIDL IS A BIT PRICEY ON TIPS? OR HAVE YOU FOUNDSOME CHEAP ? CHEERS
Soldering seems to be a bundle of joy lol. If I'm honest just replace the unit once I've had 2 weeks out of it 😂
Do you sell V3 controllers? I've need one more 🤣 and monorim motor cover for pro?
YES
Hello im at he third xiomi . had 2 m365 with both 5500km , my last one it`s a pro 2with 5300km and i am thinking to upgrade the battery to 48v monorim like urs. beside the software, is the controller gonna bee able to handle 48v?
at all of them the min/max cell it`s over or reaching 0.025v so basicly useless
Original v3 controller is great for 48v but I do suggest to add thermal paste or cooling pads behind the mofsets.
Hello, would i be able to flash doing this my own firmare? the shfw i mean, if so how do i flash the two controlers if there is just 1 BLE?
Yes you can but you need to install one at a time so unplug data from 1, install then remove cable from the one u just flashed and plug in the second one and flash.
@@mkfixitscooters308 thank you very much, also, can you recomend a motor that will fit in a xiaomi 1S on the back? i dont know if monorim or stock one or what to put
@@hecctoor_19 stock is fine but you need suspension kit to use or mount with disc brake.
@@mkfixitscooters308 do you have in your website somewhere where i can see all the parts i need?
@@hecctoor_19 sorry brother not now this was an old project but still very effective if done correctly
Good evening .. I bought a 500w monorim motor .. I have a Xiaomi pro 2.. I would like to put it on the back .. I have to change the cables .. because I put it and it doesn't start .. thank you
The answer have been given to you on a Facebook post by myself already.
Sorry not understand
bonjour combien mesure la longueur de votre deck car j ai une copie de xiaomi m365 une MP MAN tr 420 et j aimerais faire les meme modifications
the monprim 48v motor can be used with a 36v battery? pro and cons? I'm asking cos I'd like to make a 2wd with 2x250watt motor, won't fly but may be will have a better range compared to bigger motors
500w would work no real down sides to using them with 36v except it won't be as fast if you was using 48v or higher.
2x 250w motors will provide enough juice with a good cfw
ممكن سؤال اني عندي محل سكوتر وعندي مشكله في احد السكوتر ات البطاريه شغله والعقل شغال بس كارت الشاشه مرات يشتغل ومرات يطفا ماهو الحل
Where can I buy those 19mm extended nuts?🙃
We sell them www.mkfixitscooters.uk
Bonjour, alors j'ai tout ce qu'il faut , faut que en terme de batterie c'est 3 batterie dont celle de la xiaomi pro 2
Après j'ai 2 contrôleur v3, 2 moteur , 52 volt en sortie des batterie
Donc est-ce que c'est possible de faire le montage avec cela , et quels est le bon flash à faire , ou le bms de la batterie xiaomi n'est pas un soucis , il reste branché à une carte ou peut-être les 2 ?
Hi dude. Can you help a little? I put everything like you and everything works perfectly. I only have one problem, there is no room for an x-tech brake, very little space is missing. Although as a second engine I have a monorim 350w, is it possible that it is. Maybe it must be the original xiaomi engine?
Xtech is to hard to fit with disc cover for motor I'm afraid mate
@@mkfixitscooters308 Ok thanks a lot for the reply. Can you just tell me which brake you put on?
@@goranlovric6128 we use the original calliper from xiaomi pro or pro2
very good , but the rear light where it should be connected since the battery does not have its attachment
You can use 5v from the bms line and negative from halls or display
Podrías compartir el fitware..?
Hi I’m wondering if your be able to contact me some how I really wanna talk to you I got a 1000w M365 bassicly built I been doing some testing I also have built awd ones but when I’m at high speeds the motor starts to like jerk it’s hard to tell you over text I was wondering if you can help me I also recommend these controller boxes I have used on the M365 fits so nice
Do you have a link for the controllers ?? The Jerks are probably related to maximum voltage ?
How fast can this e scooter go?
With 48v battery it's speed is limited to around 30-35mph.
@@mkfixitscooters308 ok nice thanks I think I would do the same with my Scooter👌
Because of the non original battery,no bms connectors plugged in. How abt. Error 21 ? Somewhere disabled or Jumper ?
Simple software update that can be found here www.mkfixitscooters.uk/software
What modifications did you make on the original controller? I’m planning to get a 48V motor, will there be any issues?
Cooling pads and reinforced traces. I suggest to use v3 controller
Would the pro 2 have the v3 controller?
@@Shane41667yes
@@greenmoneybag8935Can the v3 handle 48v?
Where is the conector of information of the batery?
MAN! Great design and modification and your video material was very nice to watch ✌️
You make this battery?
How many S and P?
Thanks bro. Battery is made by monorim 48v 13s3p 21700 cells. 14.4ah
@@mkfixitscooters308 48V and nothing happened to the driver?
By default, this driver works on a voltage of 36V?
Unless I'm wrong?
@@nightmoon90 using v3 controller you should be good but as mentioned in the video depending on usage will reflect on reliability
@@mkfixitscooters308 THX 👌
you probably already fried 5v stepdown in ecu and its nice as brick now😉
Sorry bud I didn't understand.. The scooter works perfectly fine 3 years later.
you said "Deez Nuts", epic!!
bro i made 60v baterry 60v controller dual motor xiaomi pro 1 its very strong
What speed are you getting
hi, can the control unit handle 48v (53.6v)? will there be no need to edit anything?
Max voltage is 54.6 on 13s (48v) With the modifications mentioned for me it works perfect.
Hello , i'm french , what name exately white clips please . Sorry for m'y englich,🤪
What white clips ?
@@mkfixitscooters308 for mother card
Your video is very good, but have a look here on You tube Xiaomi 1s E-Scooter Upgrade Tuning 4.0 and 4.9
cant hear you, music way too loud
@@samprom655 use subtitles
Struggle to hear what you saing because of the music 😢
Try closed captions bro
SUBTITLES
اللهم صل و سلم على سيدنا محمد
ياربي انصر اخواننا بفلسطين
You don’t use an external mic, are way to far from camera, and use loud background music, how in hell are we suppose to hear a word you saying 😅
Turn auto caption on or use headphones. Appologies.
how do brake light function ? since monorim doesn't have them by default.