Interior insulation half-timbered house or brickwork and clinker construction. Here's how to do it

Don't be afraid of internal insulation. With the right insulating material, I have the structural advantage as well as great heat and cold protection without a vapor barrier or vapor barrier.
Structurally demanding interior insulation without mold problems.
Category: natural building materials and product systems. at: eiwa-lehmbau.de
Expertise and experience at: Lehm-waldemar-...
The interior insulation in old buildings has proven itself for us since 1989.
The wall structure for the interior insulation External wall with clay, clay primer, then apply the clay plaster as an adhesive, embed the insulation board and fasten with plate dowels.
Internal insulation of the outer wall with soft wood fiber boards or straw insulation boards, both products are state-of-the-art. Both products have good heat and cold protection.
These insulation boards will not damage the masonry.
We also use these products for roof insulation in old buildings and of course also in new buildings. Revised as over-rafter insulation or under-rafter insulation with clay plaster.
Applying clay plaster by hand or plastering machine is no problem, it works. The clay plaster inside
apply, for example, with a plaster thrower, this device is inexpensive and you can work on surfaces quickly.
Lay wall heating, this can be done with the bending spring without damaging the metal composite pipe. Laying aids for wall heating can be found on our HOMEPAGE.
There are also ready-made wall heating dry construction elements as clay construction panels.
Call in case of questions
0636492100
You can find more information about our products at
Advice on site, inquiry to
lehm-waldemar-...
[e-mail]
Waldemar Eider
Information on interior insulation Lay clinker bricks with soft wood fiber panels and wall heating. The clinker bricks have one disadvantage, they are very lime. In the interior, the bricks always radiate cold, retrofitting wall heating is technically not a problem.
Subsequent insulation would be interior insulation and/or wall heating.
Internal insulation is not a problem in terms of building physics.
Trying to insulate across the intermediate gap, the air layer between the two clinker brickwork, is problematic. Tell me, can be or become problematic.
The air gap can be too wide or too narrow.
There is water at the bottom opposite the concrete slab.
Beware of thermal bridges if the insulation is not completely filled.
You can no longer see the insulation system and you have no access to the insulation.
Blown-in insulation is inexpensive insulation, but it hides problems.
Interior insulation of a half-timbered house with the eiwa Thermo HW insulation has three in one insulating and wall heating as well as drying the masonry.
About Clay.
Claytec technically prepared clay.
Clay is used in automobile designers to produce three-dimensional plastic models.
Claytec is a putty that is solid from the start. Clay is heated to about 50 - 60° C for plastic processing to form Claytec. As the temperature increases, clay becomes more malleable. After cooling to room temperature, a thin reapplication of clay can be applied. Almost all types of clay have a light brown color, which makes it easier for model builders to assess a mold.
Clay's main area of ​​application is automotive design. Clay becomes Claytec and is used as a model mass for factory designs. The manual shaping is done with clay tools such as the clay planer. Cooled Claywtec can be machined with CNC machines. The orientation for clay models is aimed at car construction.
Cleaning clinker, in and of itself, clinker is very durable. In some cases, however, the ravages of time take their toll on a clinker brick facade. Nevertheless, there is a need for remediation in the case of salt efflorescence due to rising water and the clinker facade may be leaking.
Cleaning clinker, clinker is easy to clean. Light dirt can be removed with hot water and soft soap or with a root brush. Under no circumstances should you use acidic cleaning agents to clean clinker.
You should take your time when grouting clinker facing masonry. Grouting clinker bricks should be carried out by building up the clinker bricks. The necessary tool for grouting the clinker must be carefully selected. The joint trowel should be the correct width. Short joint iron for the butt joint, long joint iron for the horizontal joints and a joint scraper. And now ready to go.
Brick as exposed masonry.
Brick as exposed masonry.
As exposed masonry, the brick often has white efflorescence as a veil. It is well known that bricks are acidic, and this should be approached with caution. Grouting old brickwork. Good grouting with the right material is a guarantee of long-term durability of exposed brickwork. The grout should be cement-free and not damage the bricks