how to install a carburetor screen
Вставка
- Опубліковано 5 чер 2018
- support us on Patreon
/ ichibanmoto
in this video, I demonstrate the proper process of installing a carburetor screen
Ichiban Moto links:
tee shirts: teespring.com/stores/ichiban-...
I am somewhat active on Instagram but not really.
/ ichibanmoto
Send me mail! - whenever there is enough stuff in the mail bag to put together a subscriber mail reading and shout-out, I will put up a video for you guys! Thanks to those of you who already sent me letters and gifts !
Send me stuff to use in videos !
Yes- I actually do send stickers out to those who contribute bits, parts, stuff for my projects and pretty much everyone who I talk about or thank in my videos. If you want to send me bike stuff, things for potential use in videos or tools to review etc. (or even just cash donations ! )
mail them to me:
Ichiban Moto
PO Box 1362
Highland Park, IL 60035
USA
Yes- you can just buy Ichiban Moto stickers - they are on ebay !
tee shirts and swag:
teespring.com/stores/ichiban-... - Авто та транспорт
In case you haven't remembered yet... Those alla-brassonium nipplets at the end are replacement cartriges for an injection molding difusilator combustion anti-twist module. You're welcome😁
Hey! I got pinned! Does this mean we are going steady? 🤣🤣🤣🤣
Nice tip. I will install them on my Volvo V40 :) So much trouble with pelikans around here. Feathers everywhere.
The Capricorn.... It's not the feathers you have to worry about, it's sucking in the Pelikans thats the problem.
So you had pelican in the turbine? Those are very often the cause of malfunction.
Nice to get strait information from a master bike mechanic.
Auggies1956 My owner's manual was lying to me all this time.
Auggies 1956
Where?
C4H10N4O2 You weirdo, reading the manual and all that ?!? (-;
Morten Kristoffersen I like to do things right.
If the japanese engineer say to put 142ml of 10w oil in earch fork tube, that's what i'll do.
If there's no information, only then will i use the hammer and the huge flat screwdriver (as a chisel and a prybar).
*Slaps down six ichiban Moto stickers*
Because 5/5 is so badass that it deserves one more.
You might be a little new here. That was clearly only 5 out of 5 stickers.
If you count starting at zero that's five stickers. (0, 5)
It's 5 in imperial.
..the Ichiban sensei wears his glasses... what he sees.., and if he sees,..nobody really knows..
2:33
I give this 7/5 Ichiban moto stickers for being badass.
Thank you so much for producing these! I used to have to weave my own with high tensile bailing wire and gauze from used band-aids.
Having failed to obtain genuine carburettor screens I found that round teabags fit perfectly and are also a cheap alternative.
You're getting waaaaaaay too good in leading people onto the wrong track! Lovin' it.
Love you ichiban. I couln’t have built my cafe without you useful advice. And your wife wont miss that mesh from her kitchen
Missed you! Don't disappear to long again.
I'm so happy you are making "Bad Ass" videos again!
awesome stuff, I never knew velocity stacks could cause such chaos. Good job you had a clean rag too
The most respectable channel out there!
Thanks for the badass stickers. Have a powerful weekend.
You are one crazy guy! And I love your video clips. Thanks so much for the entertainment.
You forgot to use the taco bell green sauce to seal the gasket.
lmaoooo everything in this video so on an other level
A considerable improvement on the old trick of using coffee-filters or the random bit of choir-boy pad for protecting one's carb.
Well done sir!
These look great. I've been running regular filters (the coffee type) on my honda. I'll have to give yours a try!
I have been using these carb screens with succes. Use them in conjunction with those cheapo pod air filters, and the engine will after fitting screens respond much better on the throttle, and you will no longer have to ride all day with the choke fully engaged. Badass!
I did a port and polish on my carb throats and they sucks so good I lost my wedding ring and shoelace in the carb throat. Ill be getting these asap to calm things down.
Are you going to offer a full-race version of this kit with the high-flow mesh manufactured by Keikuni that was used on the 70's superbikes built by Pops Yakazuki?
We have very healthy air here: it's high in fiber. I've been looking for something to filter the excess fiber from the air, while not constipating my petcock. Awesome and badass! Thanks Ichi.
Always great and entertaining!
I need to make new videos lol
Hilarious as usual. Also a good tip about shutting off the fuel before working on a carb! LOL!!
$20.00 filter will save you $1,000's in repair, so true! The carburetor tweeker at work! Awesome job Ichiban. I saw that brass part on your Instagram post!
I've been looking everywhere for this fix.
I Like the thought process that was put into these Carburetor filter screens. The first thing I noticed is your use of the 20 micron screening in front of the 1 micron mesh thus trapping large particles prior to clogging the 1 micron fabric filter.. Vey Well Engineered,, very well designed,, very well installed !!!!! Bad Ass !
There once was a man who posted.
He liked motorcycles and he boasted.
It was rather fake
But a very good break,
The commenter is toasted
Nice video bro
My green packet! Awesome, I know now I'm in the right place.
Thanks!
Great tip...
I’m gonna order 4 for my fz07!
I see your using the metric screens. Do you by chance supply standard size screens as well?
Badass!
Bad ass! More videos please!!!!
BADASS 👍🏼👍🏼👍🏼
OMG the carb gasket and the gasotone!
Way better information and explaining the whole thing then Matt the knobhead from the Workshop can ever do! No problems with the camera and tone at all. You are so much more a better teacher! And I understand every little thing! Matt is just way to much a try hard! (LMAO! I hope Matt reads this)
matt has some fun rants
I'm unable to find the #2 Carburetor Tweeker at Harbor Freight....which isle is that on? I did find a tweeker outside, he didn't know what I was talking about either... :( I'll try Oreilly Auto next...
Badass... That all i remember about you... But that kind of unique.. awesome...
Available only at Nickel town Customs?
Ive solved debris getting into my carb permanently, and I don't even use a air filter. Go to the hardware store and buy a 1 lb box of rockcrete quick drying hydraulic cement, mix it up with some water to a thick consistence and spoon it into the carb throat till its full then trowel it off even with the end of the carb. Nothin gets in there that can cause any harm! This saves big time on expensive filters and the engine stays in perfect shape forever.
Thanks ichiban for posting badass videos! Just decided to start donating on Patreon for $5 per video! Hope it helps you out
will it fit in my honda ?
Do you think round tea bags would do the same job ?
I'm told cafe racers require special Melitta filters. "1x4" on 4 cylinders, "1x2" on V-twins, "1" on monos.
Do Ichiban Moto stock 12-gauge starter cartridges for a BBC Micro-computer? I'm having problems sourcing them in the United Kingdom.
can i substitute screen with tube sock toe fabric if properly fastened with green zip ties? Thanks Ichiban
No use stockings like we did in the 70's
Don’t be ridiculous of course that wouldn’t work you have to buy the properly manufactured screen material and gasket.
put a sock in it Snobby Bobby
No a sock wouldn’t work. OEM is the only way to go.
the tube sock toe cloth works ok on the carbs. i cut the rest of the tube socks into strips and wrapped the exhaust of my badass Honda 250 rebel but they caught fire. Man what a MESS!
Glad to see you're expanding your product line. I noticed Nickletown's quality has been going downhill lately.
MEK is badass!
I just bought a shirt from you. If you can make a sleeveless shirt available, I'll buy those too. It's hot as bawls where I am.
Thanks for the great content!
Very informative. Have noticed that everybody seems to avoid diagnosing and fixing electrical faults on motorbikes? If you could throw some light on this problematic and neglected area then I think it would be a good thing. The Japanese metric electrics seem good when new but seem problematic when they get older,unlike British electrics that stay unreliable from new. At least Triumph electrics can be relied upon to be unreliable unlike Honda that can't be relied upon to be unreliable.
Great tip and nice how to will they work on a CB550? Bad ass!
Will these fit my goldwing?
"...and a clean cloth." LOL!
Fitting these screens also has other perhaps unintended benefits in that they significantly reduces intake noise and fuel consumption too. I recommend them to everyone I compete with.
when you tweak the velocity stack make sure to install the torque cons! more pow wah!
2:33 Look like main jet pickup straws for extended capacity float bowls, but I could be wrong.
👍Badass!
Bought a new carburettor and fitted these screens, now my Tesla runs real Bad Ass.
But i did this work naked as usual and it was soo cold outside I need to get my brass balls to drop down - how do i do this ?
Bad ass!
Will this work for my Viper?
What about the flange on the gurkin rod?
With this filter i really don't need a air filter :) That is a really bad ass product...
As im situated in the 3rd world i cant afford to import your bespoke carburettor screens so i stole the used bon cafe coffee screens from my local short time bar. After fashioning 1 up to fit my KDX i noticed i was out of 2 stroke oil so i filled the tank with carnation condensed milk, now i rip from bar to bar with the aromatic flavour of latte as i ride..... castrol R is soooo last century.
Sweet! I see no reason this wouldn't work on a throttle body.
Have you ever tried setting the -set nails- set screws with a hammer? I find it's quicker and more gratifying!
Will this work on injection?
As always, bichin' video! Hey, do you sell custom #2 carburator tweekers? I think I really need one for my japanese motorcycle survival kit! Any help would be mucho appreciatto!!!
i'm going to give one away soon
If I pour a kilogramme bag of iron filings into my fuel tank I reckon it will help repair the new carb screens if stones or other debris causes tiny holes in them
how can I get my hands on this. I really don't wanna use a filter on my 125cc dio stroker. this happen one's, a lil rock flew right into my carb through manifold through my boyseen reeds 🤦 crazy day I remembered
Is your #2 carb tweaker snap off or Fakeom?
my carb adjustment tool video shows you how
Where can I buy a Number 2 Carb Tweaker?
We're do you get those
bring back ichiban!
what are your top three favorite Ichiban videos?
#1 Restore old hard rubber parts (love the skit)
#2 Remove dents from gas tank (First one I ever watched)
#3 Vibrating parts tumbler (classic bun cake design)
I really loved the how to videos. Tumbler, cleaning and polishing parts all the how to videos. But the tool roll video is probably the funniest one you've done.
I need to calibrate my screwdrivers, do you have any advise on how to do so?
i will add that to the vid list
Stacktastic!
Ive tried this on my carby and it fuked up. how do you get yours so perfect.
Do they work on FI bikes?
Note: filter paper goes on the top, not the bottom.
Methyl ethyl cacetone!
Carnegie first, ham sandwich later
Is there an equivalent for fuel injected bikes?
LogoSeven Just use these on the other side and you'll be fine 👍
I bought a Zero S motorcycle. Any tips for bad ass mods?
Trade it in on a 2 Stroke.
I put tide pods in my bikes diesel tank for that ‘60s kind of feel when I’m cruising.
Those looked like model 45-70 carburetor upgrade jets for naturally aspirated top fuel bikes.
just look at all that Damage!
Whoa! That thing almost got away from you! You should have used a green zip tie to hold it till you can get that set screw started. Close one WHEW!!!!
Awesome! But do they guard against grasshoppers and June bugs?
Uh... your air filter "screens" whatever needs screening.
Only on a fuel-injected bike, mind, the older ones don't run on battery and the screening would be manual, which is a pain in the ass to get refilled every 1000 miles (or 1600 on a Honda).
Shrapnel, brass-balls & micro-passages XD
Awesome advice. I'm glad my bike has fuel injection cos I ain't touching it.
Where can I get one of those carb oilers?
i will add that to the vid list
Another thing that sucks a lot of air, my vacuum cleaner, it will get one of these, for sure.
BWAA!
MUCHOASSOFBADNESS!!!
If a carburetor needed a screen, manufacturers would've installed them. Right up there with the Tornado and cold air intakes.
Yo momma needs a screen
Yea dude right on👍
That is part of the scam. They just want you to buy new carburettors before the regular 10k interval replacement is due.
Sooo you don't get satire. You dont even have a grasp of it. Gotcha.
@@RabidDogEOCF Satire... WHAT?
Imagine him using thouse tools fro real 😂😂😂
I have a client in Dubai that wants to submit a bulk order. I'll have my people contact your people.
"Use a clean cloth" 1:24
Uses a dirty cloth