Chicken Plucker Upgrade

Поділитися
Вставка
  • Опубліковано 8 вер 2024
  • Simple and quick plucker upgrade for most pluckers. We actually have a Yardbird plucker.
    -Replaced factory plug with regular 110 v male plug.
    -foot switch plugs in between plucker and extension cord.
    -Added 3 way on water inlet, can control water inside plucker and have additional water to sprayer.

КОМЕНТАРІ • 19

  • @drunkwoodswyllia4885
    @drunkwoodswyllia4885 Рік тому +1

    Can you make one of these, for the folks that don’t have that kind of money to buy one?

    • @squarecountyhomestead
      @squarecountyhomestead  Рік тому +1

      I could if I had the time and money myself. There’s a lot of videos out there that show how to build your own. Thanks for watching!

  • @pauliexcluded1
    @pauliexcluded1 3 місяці тому

    Okay, just FYI, you have chopped off the ground fault protection. You need to plug that into a GFI outlet.

    • @squarecountyhomestead
      @squarecountyhomestead  3 місяці тому

      Thanks for watching Paulie! As I do have an electrical background. Are you supposed to have GFCI? Yes. But in the real world…no. Works just fine.

  • @mattallen9546
    @mattallen9546 2 роки тому +1

    great idea

  • @MotoRecon
    @MotoRecon 2 роки тому +1

    I just assembled mine and it won't turn on. The magnet senor is not aligned with the latches. I want to bypass it but don't know how

    • @squarecountyhomestead
      @squarecountyhomestead  2 роки тому

      Thanks for watching Billy! Yea I’m not sure how to bypass the sensors.

    • @tommiller9743
      @tommiller9743 2 роки тому +1

      Readjust the tub to align with the magnets.

    • @tommiller9743
      @tommiller9743 2 роки тому

      ua-cam.com/video/n0-dd7tCzFs/v-deo.html

    • @tommiller9743
      @tommiller9743 2 роки тому +1

      This shows the tub coming off easier!
      ua-cam.com/video/pSNJ0XJulaU/v-deo.html

    • @MotoRecon
      @MotoRecon 2 роки тому +2

      Well I got good news the manufacturer allowed me to redrill the holes for the magnets so they can align up and they are still honoring the warranty

  • @TheYellowRose63
    @TheYellowRose63 2 роки тому +1

    Can you tell me the brand of plucker you have? Haven’t saw this one before. Really need one and DONT want to pay $4-600 for it. Thanks!

    • @squarecountyhomestead
      @squarecountyhomestead  2 роки тому

      Thanks for watching Uncle Jabbo! Our plucker is the Yardbird. Yea they’re all pretty expensive.

  • @AmericanOne9621
    @AmericanOne9621 Рік тому +1

    You just cut off your G.F.C.I. protection when you cut your electrical cord. So now if your motor faults or anything else electrical you'll provide a path to ground..... which will be you.... bad..bad..idea..

    • @squarecountyhomestead
      @squarecountyhomestead  Рік тому

      It was trash! We’ve been using this hard and heavy for about 2 years. Thanks for watching!

    • @AmericanOne9621
      @AmericanOne9621 Рік тому +1

      @@squarecountyhomestead I was not trying to bash you at all. There is a reason the engineers placed a G.F..C.I. (Ground Fault Circuit Interrupter) on the end of the cord. I hope at least your plugged into a plug on the outside of your house. It as well as those around your kitchen sink, garage, bathroom are protected. (required by electrical code) across the USA.

    • @squarecountyhomestead
      @squarecountyhomestead  Рік тому +2

      I didn’t take as bashing my friend. As an electrician myself, I completely understand GFCIs. But I’m in Mississippi and an Outlaw of sorts. No codes apply to us. 😂