I have a set of the tiniest micro-screwdrivers you EVER saw. Cost me almost diddly at the local Chinese shop. I sanded the tips into blades. The narrowest is about 1mm wide. They kolrose like a DREAM. The trick is to slide the 'blade' in at an angle. That cuts across the fibre and minimizes slippage. Goes in like butter and the narrowest tip takes the most minute and sharp curve. Easy peasy lemon squeezy. Oh, and to make the wood softer? Spray your wood with a 50/50 solution of 91% alcohol and water.
Try a final polish with abrasive wood polish like Yorkshire Grit. That should remove any unwanted staining from around the actual kolrosing without damaging the kolrosing.
Thumbs up great video. Linseed and Tung oil are safe on rags, it's the boiled linseed oil (BLO) that's not safe, as it had chemicals in it to aid the drying speed, this causes the potential heat/combustion. I have a separate idea for withholding the unwanted stain from kolrosing, I will let you know how it goes.
Although 3 years ago, I'm guessing that you are still out there somewhere 🤔. You use finely ground coffee for pigment, but, do you use jar coffee granuals crushed or is it filter coffee powder fresh or used ??. Hope you can help me out. Cheers Les.
A rather important note, tung oil is food safe (and very durable) once oxidized. But during the oxidization (15-30 days, depending on how many layers) it is actually toxic. Edit, please please do your research before using oils, especially if you're planning in putting it in your mouth
No flammability worries with natural oils containing no solvents. Boiled linseed yes..walnut oil, real tuna oil, flax oil etc are not going to spontaneously combust.
Great video, love to see more!
Someday soon! Thank you for your comment!
Thanks for showing us. Take care.
Thanks for the nice and informative video. Excellent work
Thanks for making this Carlos, I have never watched videos on how to kolros before, so I learned a lot!
Thanks so much for your demonstration.
Another great video, cheers
Amazing!
Very helpful, thanks!
I have a set of the tiniest micro-screwdrivers you EVER saw. Cost me almost diddly at the local Chinese shop. I sanded the tips into blades. The narrowest is about 1mm wide. They kolrose like a DREAM. The trick is to slide the 'blade' in at an angle. That cuts across the fibre and minimizes slippage. Goes in like butter and the narrowest tip takes the most minute and sharp curve. Easy peasy lemon squeezy. Oh, and to make the wood softer? Spray your wood with a 50/50 solution of 91% alcohol and water.
Try a final polish with abrasive wood polish like Yorkshire Grit. That should remove any unwanted
staining from around the actual kolrosing without damaging the kolrosing.
Thumbs up great video.
Linseed and Tung oil are safe on rags, it's the boiled linseed oil (BLO) that's not safe, as it had chemicals in it to aid the drying speed, this causes the potential heat/combustion.
I have a separate idea for withholding the unwanted stain from kolrosing, I will let you know how it goes.
Although 3 years ago, I'm guessing that you are still out there somewhere 🤔.
You use finely ground coffee for pigment, but, do you use jar coffee granuals crushed or is it filter coffee powder fresh or used ??.
Hope you can help me out.
Cheers Les.
I am still alive! I have been busy with family but I will be back someday soon. I use regular canned coffee, pre crushed and pre used.
A rather important note, tung oil is food safe (and very durable) once oxidized. But during the oxidization (15-30 days, depending on how many layers) it is actually toxic.
Edit, please please do your research before using oils, especially if you're planning in putting it in your mouth
No flammability worries with natural oils containing no solvents. Boiled linseed yes..walnut oil, real tuna oil, flax oil etc are not going to spontaneously combust.