Clawgear AK Rear Sight Mount - Installation Guide
Вставка
- Опубліковано 20 сер 2024
- See how the AK Rear Sight Mount for your AK is being installed. You can grab yours here: www.clawgear.c...
Claw Gear‘s modular firearms accessories products are designed to increase weapon performance and accuracy. Due to it‘s outstanding materials construction, this rugged and high quality Austrian made item will serve you in any combat situation.
NATO STANAG 4694 Rail
The nine slot Picatinny rail allows the user to upgrade his AK rifle with various aiming devices or accessories.
Adjustment Screws
Adjust the angle of the mount to align it with the point of bullet impact.
Shaped Contour
The design fits to the curve on the receiver cover and even allows to dissable the rifle without dismounting the AK RSM.
Emergency Sight
Even with an optical device mounted the sight can be used as a backup.
Compatibility: AK-47, AKM, RPK, AK-74 and all variants with the original Mauser-type adjustable rear sight
Installation: Dismount the existing rear sight and leaf spring. Put the AK RSM into the guidance on the rear sight base and align both holes. Punch the included roll pin into the bore so it is flush with both sides. Insert the big set screw on top into the middle thread on the rail and tighten it until the emergency sight aims to the point of impact. Finally insert both small set screws into the forward threads and tighten them stoutly. Warning: Torque for setscrew max. 3 NM
Best thing about this video is it doesnt have the long winded introductions, specifications and explanations about the weapons beforehand. Every other "how to" video seems to include the person explaining harping on about how they like their rifle or what mods they've added etc.
Extending the vid so that they can have more money. Greedy mediocres
By far the best “how to” video I have ever seen. Thank you so much.
I’ve never an instruction video with such precision ... thank you
And that, ladies and gentlemen, is how the perfect instructional video is made.
Perfect as in scratching the rear sight leaf without putting a cloth under the screw driver.
@@Sergei_kv82 Does it make the spring ... less springy? (-!
@@KKhhoorrnniittee Sergei it should not harm the springy if you do this correct and use cloth or it will scratch sight leaf. The spring is connected to rear sight block well for Kalashnikov rifles.
That was one wobbly sight. Ain’t gonna hit anything consistently with sights that move.
Dont think I would ever get this for my AK but that video was so satisfying to watch I sat through the entire thing
Hes a magician, he made the bore laser disappear :D
Bought it and already mounted it on my AK 74 ( easy even with not all the tools of the video) will test it soon on the range.
Is it holding zero?
I put it on my Arsenal AK74 and it's holding zero after several hundreeds of rounds. It's precise with the red dot as with the built in iron sight system
@@michaelpralong2916 What optic would you get for this with your eye being 11 or 12 inches away?
@@rcpro21 so far yes. But no extensive use.
@@bobbyb7127 I put a Holosun red dot. For me it does de job.
I was looking for an airsoft tutorial, but thanks youtube...
Mit integrierter Eisenvisierung, Top.
4th grade me taking apart my pen, and putting it back together
Not even interested in this part but damn this video is on point. 😂
Thank God! No jibber jabber🙏🏼👍🏼
Use needle nose pliers to pull out the leaf spring.
I saw this rail online how come nobody talks about it it seems really cool.
I bought that for my ak 47 and at first i was totally happy with it but after 3 weeks, when it suddenly broke after 20 min combat at cold temperatures. The metal of the rear sight base (with the two holes) on my AK broke. I wasn't even using a very heavy sight but that and the cold temperatures where enough to break it.
Hi, we are sorry to hear that, can you please write us an E-Mail? We will offer a free exchange!
Combat, Huh...? 😅
@@ShaneBraatenLarping in the snow.
IM FROM INDONESIA also wacth your video
Fantastic video. Exactly what I needed.
great video, really helped me, thanks a lot!
Ottima spiegazione! 👍
Now all you need to do is weld it on to hold zero and your good to go
يببوونث
Innovative.
Thanks 👍🏻
Well done
Great vid
THANK YOU!!!
Wow excellent 👌
Thanks
this guy is the hank hill of guns lol
new subscriber bro good work nd good luck
هها
prefect thank u
This is a video is awesome
Hi, great video and interesting product. Subbed.
Wow... and I've seen several videos of guys putting gloves over the sight and then proceeding to punch the rear sight off...
Seems like alot of set screws to me, but heck I’ll try one.
much appreciated
So 3 years later how’s it holding up?
Congcawawaz
احسنت النشر الله يبارك بيك
برافو
Excellent video. Never heard of this device. Been a few years - is it any good ?
No longer available, when will you get more? Almost $100 for this seems a little high imo. I'm a little nervous about the height of the optic will cause my cheek well to be way off. There are others options that let you co-witness and the cheek placement is the same as for the iron sights. What makes yours better?
+BlazingGex
We are currently (Jan 2016) re-producing new Rear Sight Mounts and they will be ready at the End of February. The specifications was to develop a lightweight mounting possibility for any standard AK with an included iron sight that can be used with the optics mounted. The instructors of our Special Forces work in countries which mostly use AK47 but they want to use their red dots as well without making too much modifications on the system itself.
We have tested it on a polish AKM recently which was equipped with our RSM, a Magpul Zhukov Stock (www.armamat.com/p/en/Zhukov-S-AK-Stock-AK47-AK74-Dark-Earth-Magpul/18483/1535/), a 0,25" cheek riser (www.armamat.com/p/en/AK-0.25-Inch-Cheek-Riser-Black-Magpul/18489/901/) and a Aimpoint Micro T-2 (www.armamat.com/p/en/Micro-T-2-2-MOA-Aimpoint/20004/810/) which was a great and comfortable combination to shoot with.
We are pretty proud of our product: It is made out of high grade aluminium with a Mil-8625-F type III, Class II anodising process for a robust finish and we produce the sight in-house and meet exactly the SOF needs as it was made for. Of course you are free to choose any AK accessory on the market which fits your personal demands.
Hmm, looks like an alternative to use vs going through a mess to my M64 RPK, also quite curious if this can be applied to Vepr rifles (especially 54R/308 Win/51 NATO variants)
Hard to find parked polish rear sight :/
Bringe das alte visier nicht weg hab aber auch keinen schaubstock eo ichs montieren könnte..
Theres no way those 2 little screws allow you to hold zero
I think the same: I have another similar thing, but mini-screws dont hold up, even with loctite… (and then I am even talking about airsoft one, with blowback)
I don’t believe this holds zero
احسنت شكررران
nice
You rock!!!!!
Bagus...keren bgt
how do you install side red dot on ak
Will you also make an video on how to install the AUG SOF Compensator? I ordered it yesterday and I am wondering how I will be able to put it on my AUG-Z A3
+TheMeoled
We just uploaded a tutorial video for the AUG SOF Compensator - have a look on: ua-cam.com/video/fEosQJ9pJXA/v-deo.html
Is the location of the rail practical ? Isn't the scope too far away from the eye ?
This will be best for a reflex sight or similar, in which case its position is fine, traditional scopes dont really mix well with AKs at all. I have one on a converted handguard, so even further down the gun and I like it a lot, it means you have plenty of room to also look around the scope to avoid tunnel vision and its out of the way of triggers/selectors
Do these hold zero good? My stock DDI came with his part but I've heard they're worthless as far as the sights holding zero over time
Medium loctite?
အကိုတစ္လက္ေလာက္ရခ်င္တယ္
Great video .
Will this fit on my yugo?
Cool
What optic would you get for this with your eye being 11 or 12 inches away?
Does this fit on Yugo's?
the rail does not move? is it well fixed?
How the sight is adjusted to 100 meters without a test fire, if the 100 meter selection is there, it should be shown in the video.
Can I put this on an air soft gun specifically a GHK RPK? I haven’t found any rail mounts that don’t require any drilling. This looks like a good option because it retains its the functionality of the iron sights with the added benefit of mounting an optic.
AKM + 2X
Lol could that optic BE any higher? I’ve had mounts like this, namely the strike industries. Hope you enjoy shooting with one inch worth of chin weld. Attaro is where it’s at. Much lower.
بدي عاده السلاح ليش تبيعه طبيعه
Excelente Job bro
منو شاف ملكفا طلقه
شنو هاي الخلاها بالسبطانه وبعد مطلعت بيهة ليزر
Would this work on a Russian SKS?
👍👏
Hello, does this hold zero?? Those mini screws without loctite…. where are they made of, and why can this hold zero, if any at all??
I have similar one of another branr, but thise mini screws dont hold (even with loctite)
Hello vaya it is nor nary
Как работает АК 47 @Ca14
Website says this can't ship to USA? 😢
Go to MidWayUSA.com and search, “Samson Rear Sight Rail”. Got one for my Arsenal AK101 and it’s awesome. It’s solid steel, unlike this one
Did you have to put this irritating music in the background?
mute it then, dumbass
هل من شخص عربي مر من هنا
أي يوجد عربي هنا
@@user-sj4bf1qs6t تحياتي الك شرفتني غالي وغالي
عماني يوجد هناء أيضا
@@yamenalhumaimi9342 تحياتي الك تشرفت بمعرفتك الغالي
Could this fit on an airsoft gun?
We are men, we don’t do airsoft. Lol
Go ask one of the kids on the airsoft field.
@@Va.2Azwell in the UK, it’s the closest you can get. I still managed to get it working and now I have a knockoff EOTech on it
How did he just took it off so easily (1:10)??? I'm stuck here for days with my airsoft gun and I just can't take it off, please help (ak model is CM.042A)
my airsoft gun has this too holy shit
لا احسن شي ...المفاجات....دايم تدلخ وتنهي
Waters
اه
How hard is it to vocalize the instructions? Or would you have to pay the guy more?
what language would you prefer?
Not all of us are stupid. This video show all you need to know.
Will this also work on a Russian SKS?
if your hammer is NOT 100 grams you CANNOT preform this installation. Sorry.
ثلاثه
1986🇧🇩🏅👍👍♥️♥️♥️♥️🌹🌹🌹
Holds zero for 1 shot. Lol
هواو
😕😕
OMG I just got glock 9mm from cashmain on wickr he also has different type of guns
Pubg akm
Good video without all the Bullshit yakking.
Just straight up video instruction.
Looks like a very good product, IF it keeps its zero.
Hhhh
شتى جاكة. وةالله
ههههههههههه ههههههههههه dash
,☢️☣️🤫😬
Was soll das ??Versau die KALASCHNIKOW nicht. Das bleibt so wie es ist. Dadurch schießt sie auch nicht besser ( genauer )
Poor little thing is being butchered, he doesn't like it.
,☢️☣️🤫😬