Nice video......Great tool if you have a lot of Solar to clean..... If you have super amounts of solar either a Robot system or tractor system is the best next upgrade ..
Great info thanks!! Two questions 1) Running 120m-150m hose, what size pump would you recommend? 2) What is the internal diameter of the hose? Would appreciate your help.
You would step up into the range of 3500 psi at 15lpm. Reduction gearbox driven. Setting up your hose length and checking pressures with the machine on the 1/4 I’d hose. Aim for 1800psi at the head, set by rpm 👍
Yes, 'Pure Water'. Always a great presentation and guidance. Thanks mate.
Great video on the C1000
Thanks Guys, you are the Solar Panel Cleaning KINGS🏆
@@BlueTongueIndustries1300884566 I wouldn't say that… but thank you
Great video and great brand, finally in Australia. It could be nice to see that test with a dirty pv (mould or dust). Thanks.
Appreciate reply, we sure will be active with it over the next few months. Both commercial and farms.
Nice video......Great tool if you have a lot of Solar to clean..... If you have super amounts of solar either a Robot system or tractor system is the best next upgrade ..
Great review, , prefer the brush looks good, will have to purchase 👍
Wait unit you have to do a few MegWatt per day. 10 times quicker with rotation👍 Currently a record may stand at 9800 panels in one day😮
You did 9800 panels in a day with the solatec c1000?
@@foreverhumbled Set number carried out in USA with well know business
@@BlueTongueIndustries1300884566 They must of had wings!
Excellent vid for maintenance
Thanks, another good one with full tear down from start to finish.👍
ua-cam.com/video/tILYeuxnuSA/v-deo.htmlfeature=shared
You need the splash guard 100 % !!
Great info thanks!! Two questions 1) Running 120m-150m hose, what size pump would you recommend? 2) What is the internal diameter of the hose? Would appreciate your help.
You would step up into the range of 3500 psi at 15lpm. Reduction gearbox driven.
Setting up your hose length and checking pressures with the machine on the 1/4 I’d hose.
Aim for 1800psi at the head, set by rpm 👍
Super cool brother
What's the water pressure out of the nozzles when sprayed on the panels? Thanks..
No pressure just a flow through wide nozzles. The water 💦 has driven the gearbox and then exits through large holes which is used as rinse water.