Waste Oil burner Melting a scrap Aluminum Head and lawnmower motor
Вставка
- Опубліковано 24 сер 2024
- In this video I melt an aluminum engine head and an aluminum lawnmower motor with a waste oil burner. using waste oil from lawnmowers that I have scrapped, and some of the oil comes from refrigeration compressors that I have scrapped, I hope you enjoy the video
Thanks for watching, Please Subscribe, Like & Share
“As an Amazon Associate I earn from qualifying purchases.”
www.amazon.com...
Siphon Nozzle
www.patriotsupp...
I live in Nebraska I have no interest and melting metal I'm a caregiver my hobby is fish tanks and aquatics I sat here and watched an hour of this and I had the time of my life so you do UA-cam well keep it up two thumbs way way up
I am glad you enjoyed the video, there is just something about a fire and melted metal. fun to watch and do, Thanks for stopping by
Oh really I live in Nebraska also go Big Red
Wow....also a caregiver here . Oregon. Make aquariums. Small world? 😋
Ok you got it on your chest ,that explains it .my father was a welder in the coal mines for 45 years and he breathes the same way but of course he has copd and black lung i guess thats why i notice so much ,sorry sir did not mean to sound rude and im glade you are healthy. I just subscribed because i really like your channel. thanks for your knowledge on scrapping.
I get quite a few mention my breathing, not much that I can do about it, I did quit smoking about 35 years ago. I am pushing about 300 lbs. around I need to loose about 80 lbs. the wife has copd and on inhalers Thanks for watching
The burner is a great idea, using the old oil keeps your overhead down, American ingenuity at its best, thank you for your videos. Hope you have a great retirement.
Thank you, Thank you, Thank you, a guy a work gave me a bunch of 5 quart jugs full of old motor oil, it will last years
We need more metal melting videos! You have one the most badass setups
Thank you. I wish I had more time to use it, between work and scrapping I stay busy, and the Oklahoma wind. I will retire nest year and build an addition onto the shop so that I can use this in bad weather, but I will have to have some good ventilation, but block most of the wind
Just a tip from an old mechanic. You can use a deep well socket or pipe section and a hammer to whack the top of those valve springs and the spring keepers will pop out and the valves will slide right out. This will be an easy way to speed up heating and make cleanup easier afterwards.
Thanks for the tip
No idea why I'm recommended this but I watched the whole 58 mins so I ain't complaining!
Thanks for stopping by
Same. Enjoying it tho. 👍
I've melted Aluminum with oil. Gravity feed into a forced air stream(small centrifugal fan). Fan takes a lot less HP than an air compressor.
On aluminum if you get it hot it gets "short" and a blow from a hammer can make it shatter like tempered glass. It's effective for getting the iron out of castings.
I really like the idea of a waste oil burner instead of propane.
I agree. The only cost is running the compressor. You can get waste oil for free.
yeah I just use a little propane to get it started Thanks for stopping by
@@Okiescrapper UM.DID YA NOT see that the propane tank was in use,
@@ROADKILL4147 the propane is used to start the burner only
@@Okiescrapper already been used fry oil could be used when you're out of waste oil
*This whole setup is INGENIOUS, nothing fancy and it just WORKS! Best of luck to you Sir post retirement and when you can do this more on a FT basis.*
Thank You, yeah kind of ruff it's a prototype I will add a little more refractory to it and most likely make a better one next year
I used to do the exact same thing, i got sick of muffins and started using bread loaf tins so i could stack them like cinder blocks on a pallet.. i even had the bright idea to bronze braze them together like a brick wall with silver bricks and gold mortar 😂 so i could build a polished silver brick dog kennel with gold mortar 😂..
I remelt the cupcake ingots as they get trash in them that falls through the hole, and then I sell the small ingots on Ebay.
It's like watching a campfire. It's so relaxing to sit and watch that molten goodness flow out!!! Kept you on your toes there for a while though! LOL!!
Yes it is a good relaxing way to spend the day and make a few dollars, I think I figured 130 small ingots will weigh about 35 lbs. so price on eBay would be around $70.00 for the box full, around $17.00 for shipping and eBay and PayPal fees. should make just over $50.00
i clean my dirty aluminum the same way but i let it run into a kettle of water and remelt the little beads in a crucible later and pour it into ingots
I may try that, I will have to cut a hole in the bottom plate so the aluminum can flow through, and I will have to put this thing on a table frame
that sounds perfect. don't need to worry about baby sitting the muffin pans
I would make sure to keep a good distance between the water and the aluminum "spout". If there isn't enough time for the dripping aluminum to form an oxide layer before hitting water it will create hydrogen gas, and an explosion that will send your bucket of water and molten aluminum flying everywhere.
i have poured molten aluminum into water beads and water no explosions @@austinhemp9422
I have also poured aluminum shot once, and didn't have a problem. But it can happen, and there's a video here on UA-cam that shows it pretty well. Not a big firey explosion, just an eruption that sent water and aluminum everywhere. If I have time I'll find it and post the link.
Not saying it's a bad idea, in fact I plan on doing this exact thing myself. I just wanted to point out that a bucket of water would need to be much further from the furnace than his current muffin tin.
This gentleman figured out how to roast aluminum 😂😂. Awesome to see liquid metal flow like that.
it does have a relaxing effect on a guy
@@Okiescrapper I appreciate your effort in sharing your pastimes. Hopefully you’ll have even more fun when you roast aluminum full time👍
Really clever using waste oil to melt aluminum.
First time iv seen waste oil used to fuel a foundry, really good idea tho, you've inspired me enough, i think ill build myself one 👍🏻
I have a play list for the waste oil burner and melting metal, with some info on the build, Thanks for watching
@@Okiescrapper ill give them a watch, thanks for making the videos 😎
Ahh.. The old garbage can table.... The best table I have in my shop... Sure there is some holes from welding on it.. but still works good...
I used that garbage can for quit a while, the melting pot sits on a very heavy table now
I am an Okie too. Like the oil burning melter. My son, daughter and I started doing this for fun. lol yes fun. Tulsa area here.
That is awesome! it is fun to do Thanks for stopping by
We sometime may need metals for money the way things are going. They are printing the dollar like one’s business. Makes for bad times.
yes some people are stacking copper, brass, and aluminum, lead, I need to get a few more crucibles and some molds so that I can make a few copper and brass ingots, some to stack and others to sell on eBay
@@Okiescrapper essa app
Essa
Kkkk kkkk
Eu bom BB BB BB BB BB essa kkkk kkkk
Kkkk
Vdd BB essa kkkk
Vdd BB BB BB
Ok ok BB BB essa esse
Kkkk que esse BB kkkk kkkk eu tô arrumando como
NN BB
Essa kkkk
QQ BB
NN BB BB juuu BB BB BB BB
Esse kkkk isso BB essa BB kkkk esse BB kkkk kkkk kkkk att esse de BB eu esse app
Kkkk kkkk kkkk kkkk
Kkkk kkkk
Kkkk kkkk kkkk kkkk como
Kkkk kkkk ok BB e DDD
@@paulohenriquefiore7945 nice little butt text lol 😂
Just a thought..move the cooling rack to the side instead of behind you. That should make it easier and quicker
I don't usually watch videos of this length but yours was so fascinating I would have watched you melt 5 or 6 more motors before bedtime, subscribed.
Glad you enjoyed it! thanks for the sub, some of the guys like long videos, and I figure the guys that don't will skip through it. I don't like to watch long videos either, I have lots to to but sometimes I just take it easy and don't do much all day. but that doesn't happen often, Thanks for stopping by
love that style of furnace.
Strangely captivating and satisfying.
Thank you John
Absolutely refreshing to see someone doing hot metal work wearing pants and men's shoes instead of being half necked and wearing Ho Chi Minh sandals.
Looks like we have an actual job rated man here.
Thank you, I need to get more safety stuff. I do have a leather apron that I should ware
Really an interesting video I'm impressed. 25 year submarine diesel mechanic
Thank You, that would be interesting working on submarine's, I should have joined the navy when I was 18 but I got into drugs and beer, , thanks for stopping by
Okie here too, great idea. i got a bunch of big stuff that would be better served small LOL
Thank you, and thanks for stopping by
Okay, I can see you or I can't please everyone. Thank you for doin' what you are doing stay safe
Thanks Michael, it's all fun my camera skills need some work, a scrapper I am, a camera man not so much, Thanks for watching
A lot work for $15,,,,but I admire you for making an honest living,,,keep healthy friend
my living is from Hobby Lobby I do conveyer maintenance for them, scrapping is a Hobby and gives me some mad money, I plan to retire in February and then I can spend more time on my hobbies. and melting metal is fun. Thanks for stopping by
My neighbors would love me. You gotta have a package of weenies or marshmallows and Graham crackers with chocolate as a decoy.
my neighbors east and west are a few hundred feet away, cow's to the south and 1/4 mile to the north, it is loud, Thanks for stopping by
The waste oil burner is brilliant!!! Two things. 1) I'd be very curious to see you sift the ash at the bottom of the forge. I'd imagine there's about half a mason jar worth of tid bit treasure down there. 2) I wonder if it's possible to hook the air compressor up to some solar panels really cutting the costs down? Waste Oil and Solar seems like a winning combo.
lot's of steel in the ash. I toss it into the shred load. you would have to have a good sized solar setup to run the compressor for any length of time. I have 200 amp hours of battery, and it will draw it down fast. so I would say a guy would need about 2000 amp hours to run the compressor for an hour or two. just a wild guess. on my electric after I hit a certain point on kilowatt's I drop down to 0.06 a KW here in Oklahoma
beats stripping them, but I agree with let it run into some Angle iron straight into a bucket to make beads,
I may take a small piece of channel iron and weld up a bracket to hold it up to the hole and see how it works. It would be nice to have the bucket on a turntable to rotate it as I go may need more then one bucket of water, with what I melted in this video and what I melted after the video total for the day was 54 lbs. used about 1.5 gallons of oil
@@Okiescrapper WHat do you get for each Ingot in scrap though? 15 pounds and getting - I'd estimate $80 - $120 doesnt seem all that worth it to me
@@shoominati23 I’d bet a lot less than that.
@@nsboost yeah he said he selling a lb. For 2$ so that would be 30$ but seems worth it since he dosnt use propane he uses oil that's been used so it's way cheaper
I'm hopping to build one some day when I get to my retirement and have the place for it. I'm sure you already thought of it, but probably insulating the outside of your foundry will help with the melt even faster, but with that oil burner set up it might be a minor thing to consider. Cool vid, thanks.
I have a thin layer of refractory cement around the inside, I need to add more, when I retire I may build a better one
“Hopping?” 😂😉
You might try to come up with a holding pit in the bottom, with a way to keep it warm. Then you control the pour into your billet cans with a channel or drain with a plug of some kind so you don't need to be there for every billet as it gets melted.... keeping it hot and keeping your drain system working are probably the most troublesome parts.
I saw another youtuber was doing something similar but the drain hole was over a bucket so every drip of aluminum formed into pellets. Thank you for taking the time to make this extensive view and showing us some of your shop as well. I am also glad you mentioned the other video with the siphon nozzle because I wanted some more specific details. Great work scrapper!
With the pellet method you don't have to be changing out the muffin pans etc.
yeah I am tossing around a few ideas on how I want to modify the melting pot, I am thinking of a hole under the other hole and take an axel that I have cut it down to just above the wheel weld a plate on it for the bucket to sit on and as the aluminum drip's into the bucket I can turn it with my foot, so the aluminum will hit in different places,
@@Okiescrapper with the drops dripping into the water bucket you wouldn't have to tend it at all. the pellets would naturally stack up and you don't have to turn anything or replace any muffin pans. Just pour out the water when finished and then when you remelt you can easily add pellets to your crucible.
Of course the muffins may be more space efficient to add to your crucible.
Anyway, not trying to tell you how to do your own project just sharing what seemed to be a good design I saw on another channel. Thanks for all your efforts in sharing your approaches. I really appreciate it!
Dang! Once you get that aluminum to temperature those cupcakes fill up fast.
yes they do, total for the melt yesterday I did 54 lbs.
Watched all 58 minutes! Very relaxing!
Glad you enjoyed it! Thanks for stopping by
I did not know you can use motor oil to do that one more use for oil that is a really good idea
some are using a drip feed to heat their shop, this setup uses a syphon nozzle, others use a drip feed and a blower on the burner, some use a tank and pressurize the tank. lot's of videos on UA-cam, Thanks for stopping by
Great video! My favorite vids are by people who can take things that others have thrown away and use them to make D.I.Y. items that could cost thousands to buy. I sold my shop about 15 years ago (I built and designed custom machinery) and retired--for about 2 months. I closed in an old tractor shed behind my house and bought some old machines. I brought in 2 South Bend lathes, a 14 1/2 inch swing with a 6' bed, and a 9 inch with a 3' bed. A9" Clausing lathe, an Enco milling machine, a drill press, and a welding area with gas, stick, MIG, tig, and plasma cutting. I started getting interested in foundry work by watching it on UA-cam. I started out small and before I knew it I was building bigger flasks than I could lift, filled with sand. At that point, I knew I had to make some changes. The first thing was to be able to lift these flasks, so I built a crane from pressure-treated 2x12 laminated together to make a pedestal crane that could swing a 12' rad. The next step was a ramming-up table. It had to be very strong and very flat. I built the table frame from P.T.4x4 and to get the flattest top possible I poured a reinforced concrete slab with the top1" self-leveling cement. Now to test the crane. It wasn't possible to pour the top in place so I used my new crane to set it. With all the material used that top had to be just shy of 1000 pounds, far more than any mold I would make. It made some scary noises but did the job. The new foundry can do 17 pounds of aluminum in 17 min. Something I don't see anyone else doing is using 10 and 12-pound dry chemical fire extinguisher tanks that can no longer pass the certification test. I cut the tops off and use them as crucibles. They last for years, in fact, I still use the first one I ever made. My new burner is a four-channel setup. The middle handles waste oil, the second propane, the third, compressed air, and the space between the inner and outer tubes is for high volume air. For my larger flasks, I use a concrete mixer to tune the moisture in the sand. When the sand is ready, it is dumped into a box hooked to the crane. The mixer is next to the crane, so it is easier to get the box in position to open the side and start filling the cope. When the cope is rammed up, the box is set down and a 3/16 steel plate is screwed to the bottom to hold the sand in place while it is being moved. A special flask lifter hooks onto the cope and the crane lifts and turns it over. The other halves of the patterns are installed then the drag is bolted in place. The tubes for pouring and venting are placed and the drag is rammed up. When the ramming up is done. the tubes are removed and the drag gets a steel plate too. Now the bolts are removed from the flask and the flask lifter lifts the drag and turns it over. The patterns are stripped, gates and sprues are cut, and repairs are done. The crane lifts and flips the drag and places it back on the cope and the bolts go back in. The crane and lifter now hook onto the lugs on the cope and bring the flask to the pouring station. The steel plate is removed from the drag and the riser is placed and we are ready to pour.
sounds like you have a very good setup, it sounds like you should start a youtube channel, I am sure a lot of guys would like to see your setup
@@Okiescrapper I really don't want to commit to a UA-cam channel, but when the weather breaks I can get back to doing my castings. When I saw your setup with a continuous melt foundry, you got my attention. The only thing for mine is it has to be cleaned between batches as I sort by alloys. I melt everything from cans to 7075T6. I even scored a block, heads, and pistons with rods from a funny car, 100 pounds of billet 7075T6. I will probably do some videos of the foundry and some of the machines I built for fun, but I don't want to do it on a regular basis.
Yes you have earned my subscription, this is a type of furnace I haven't ever seen. I look forward to your other videos and to building one of my own.😄
Welcome aboard! and thank you very much, my channel is on scrapping metal and some aluminum items take to long to try to clean all the nut's and bolts off of and you still have steel items in the thing so I melt it to save time, scrap yards won't take ingots so the plan is to sell the ingots on eBay to the guys that do sand casting. I have a play list for the waste oil burner and melting metal ua-cam.com/play/PLDwjkWgPa7QhOsBMArmxSoyMnJRJ9XGNk.html
hi, what a great setup, i loved this and i could do this full time i am so envious of where you live it looks beautiful even though its foggy.
i can see how much you love scrapping. thanks for the video.
it is fun to do when it's not hot out, this fall I will start using it more, going to try to make some improvements on it too
You are a genius. That is fantastic burner. Used oil, who'd a thunk it!
Glad you liked it!. I watched a guy on UA-cam called oil burner, and got the inspiration, another guy on here had a burner and gave the link to the siphon nozzle so I gave it a try. I new I needed a lot of heat to melt in an half open pot. that is why I went with waste oil. and it is cheep, I get the oil from old mowers, my oil changes and I got a lot from a guy at work, Thanks for stopping by
I really enjoy your philosophy and presentation. I wish I lived in an area where I could this, but for now I will watch and learn.
it's kind of fun and relaxing at the same time, but it can keep you on your toes at times too, I just don't get the chance to do this as often as I would like
Try this in Calif and you will be arrested and charged with LOTS of laws broken, true and imaginary.
@@AffordBindEquipment Move way out, that should do it!
@@richardmccann4815 out of state would be preferable...
You need a sliding iron cover for the bottom to temporarily stop metal flow! Cool vid!!
that is an idea, I may have to try that, thanks for watching
Nice tool! Gotta love making money out of scrap.
You got that right!
Waste oil...amazing process ....nice work ❤️🇺🇸❤️
Yes, thank you. and thanks for watching
How about installing one of those crazy powerful fishing magnets to on a swivel next to the outlet to catch any iron/steel trying to get through said hole...
This is a really neat setup. Way better than trying to cut up the raw materials to go into a crucible
yeah that's for sure, If I were to cut it up I think I would get a plasma cutter, aluminum plugs the teeth on saw blades. Thanks for stopping by
Great channel ive just stumbled across! You clearly work very hard, massive respect to you from Wales UK
Thank you very much! I need to get off the pc and get outside weather is great and much to do. Thanks for stopping by
That's the best set up I've seen on UA-cam yet
Thank you
I think the burning used oil is a genius idea!
I knew with the waste oil I could get the heat that I needed, I got the idea from a guy called oil burner
Have you ever melted magnesium by accident and hit it? OOO boy what a bright flash.LOL
no I haven't, and hope it doesn't happen, I know how to test for that now
Great idea two stage melting and oil burner to boot, yer awsome
Glad you liked it!, thanks for stopping by
Add a pipe under your 3/4 drain for your melded aluminum right in to your second unit and save a step .I am also using a blower so no compressor running .i am also using bigger trays . Thanks for the good ideas. I am melting a 6x6x8 foot pill of aluminum and a pile of aluminum car rims .
I need compressed air for the siphon nozzle
@@Okiescrapper if u have the time . I used a 6 inch solid round 3/4 inch and driled 2 3/16 holes down the center one above the other about 5 inches .from the tip drill in to the two holes with 1/16 taper that end . the uper is for propane the lower one is for oil .tap and use brake lines . U nead 2 inch pipe 5 inches one end 90 degrees the other 45 degrees. Use a nother pipe cut at 45 degrees drill a 3/4 hole in the back of the 45 degrees so it lines up with 5 inche center of small piece . Depending on your blower and jet size. No brass all steal . I even got fancy and used self starting propane controls off a expensive barbecue I scraped. I spent a lot of time billing it . Still modifying it. I enjoy this kind of stuff. Thanks .
Everyone knows you're meant to rub butter round your cupcake pans first! Come on man...
Hes showing him self to do really well
Use a cookie sheet then cut it into strips. It will melt faster for the second pour
If you build old oil burner you can build a car engine the also burned old oil.
Enjoyed your video best of luck on your approaching retirement
Thank you! Will do!
OMG, the post office has gotta loooove you.... LOL!!!!!
I use the if it fits is ships the mid size box holds about 40 lbs. think they have a 70 lb. limit
@@Okiescrapper well if it ain't broke, don't fix it.
That old hillbilly from Arkansas I've talked about used a cast iron bathtub and ran the aluminum out of the drain lol. He'd get drunk and keep a fire in and around that thing all night. By morning, he had aluminum ingots everywhere. He'd pay me to collect them out of the dirt. I think he let them drop into the dirt for extra weight lol.
I know a maintenence tech when I see one. Keep up the excellent work friend.
Thanks, will do! and thanks for stopping by
Good and informative video. There's a man in England showing how he uses static electricity too power an outlet.
that would be neat, free electric
the motor at 41:30 is a lawnboy 2 stroke motor. I'm sure you would have made more money selling it, than melting it. I bet you on ebay it would have sold pretty fast with no reserve. I'm glad I found this video. Waste oil is so easy to get. The scrap is easy to get too.
I get a few of the old lawnboys now and then, didn't know there was a market for them. I need to get some storage cleaned up to start putting stuff like that on eBay. will have to set stuff aside until I retire then I can get stuff done
Seems like alot of BTU s for a gallon of old oil great video
and that is a 1 gallon per hour siphon nozzle. and still if I turn it oil up to much it will drip out the back of burner, I may need a bigger pipe and think what a larger nozzle would do.
New sub here ... Love the idea that you have there with that old oil ... Cheaper than propane ....
Thanks for the sub! a little work and expense getting it together. but worth it lot's of fun. and the videos are doing very good
so I heard that if yall click on the ads it opens a new window and play the ads all way thru except the 30 min ones then just X out of ad he gets a lot more revenue from it thinking if you swept the bottom of the tub out and collected it to put in crucible it would make your ingots a bit more cleaner I highly enjoy the melt videos thanks
not sure on clicking on adds, I need to blow it out with the air hose and clean it up and add a little more refractory around the bottom to angle it to the hole, I want to get some more molds and try to do a copper and brass melt in the blue furnace.
@@Okiescrapper I clicked on about 5 guess you can see if it makes a difference I just read it from a comment from another I subscribe to
Your oven definitely needs to re-lined with refractory cement, time to show it some T.L.C.👍
when I first started this thing I had no refractory, and I bought some to fill the low area in the bottom, then thought I would add a thin layer around the side, I need to add more and build the back edge up so everything will flow to the hole, I had it out in the rain and it did a number on it so now I keep a garbage can lid on it. it's my prototype
@@Okiescrapper That would be cool if you could build a bigger and better one that you could put whole car engines or transmissions into and perhaps a bigger or dual oil burner could be build.
Hi here's looking all the way from Auckland New Zealand, you could boil up water and have a cup of coffee at the same time.
yeah but not sure how it may taste, but the coffee does sound good
For aq bit of a while I have been thinking about collecting and melting down scrap metal myself.
Your video has given me a bunch of ideas how to go about deciding how to melt down metal
I hope your endeavors to go full time into scrapping goes well
it is fun and relaxing to do, I plan to retire next February If I can force myself to get up and go to work every day, UA-cam and SSI should work out well for the bills. Thanks for watching
@@Okiescrapper I just wanted to say thank you for your videos being online, because those videos will help others 🙂😊😊
You did not get to sit down very long! Great video!
Yeah I need to turn the oil down a bit let it melt slower, but it is fun
Put a pouring spout on the furnace and the aluminium will run out leaving the ash behind. A small lump of clay on a rod to plug the spout and you can melt all day
good idea
Wow thats a hole other level then those fancy devil-things in fancy garages: this is the real deal 💪🏿
thank you, I got the idea from a youtuber called oil burner, I wanted something big enough to melt lawnmower motors
@@Okiescrapper - Well i guess you figured that out 🎖 ands its pretty bad-ass & no-nonsens
I asked myself why am i watchin this video and watched the whole thing to the finish......and i thought never to old to do something ....and the idea to sell em on ebay ...thunbs up
Cast aluminum item's with bolts and other steel in them bring a dirty aluminum price some yards call it aluminum breakage and get about 10 cents a lb. by melting in into usable size ingots the guys that do sandcasting as a hobby pay from $2.00 to $4.00 a lb. for them. so I thought I would try my hand at it. Thanks for stopping by
Have you tried to just let the aluminum drip into a bucket of water you would get beads of aluminum
I may try that I will have to cut a hole in the bottom plate for the aluminum to flow through, and put it on a table frame. I saw a video of a guy that tried that and it looked like an ant hill casting
in stead of cutting a hole you could just place a piece of angle iron under there and the aluminum would flow down the angle iron into a bucket of water or whatever. I totally get why you would want it to go straight into a muffin pan. those hockey pucks are just the right size. but you could just ship the pellets. I wonder if you could weld a heavy duty brass valve in the hole and open it with a long piece of metal welded onto the handle when you are ready. also a grate at the bottom might help keep it from clogging. love the design everyone else I have seen uses a crucible and tongs to awkwardly pour, I never thought of just letting it pour right out of the foundry.
Molten metal on water makes a steam explosion with molten projectiles.
that is an excellent point. a safety splash shield would be wise.
I would be down for watching a full day of this.
I used up about 1 1/2 gal of oil and melted a total of 54 lbs. yesterday, started at 3:15 and shut it down around 5
@@Okiescrapper yeah, I'm down to watch the whole thing. It's great to watch while I'm sharpening knives and doing other shop stuff.
Sarcasm much Brando? If not, then you gotta get out more often son!
Because watching a full day of this is like kissing your sister more than once just to see if it really isn’t all that bad!
Just saying
@@klausvonschmit4722 🤬
Probably a few Lawn Boy mower collectors that are mad now...
I think you are right on that, I had a few guys tell me I could have sold it, I guess I need to clean the next one up and put it on eBay
I may try this next year as an Earth Day project for Homeschool group.
that would be neet
Highly poss you already kniw about it.... you can use normal tablesalt to flux the Aluminiumslag to pull out the remaining metal out of the slag. Simple, cheap but effective.
thanks for the tip I think I saw on a forging group non iodized table salt & baking soda 50/50 mix. so I will need to make a trip to the store before I do my next melt, repairing the furnace right now, new refectory on the bottom. the heat melted the perlite cement mix
I love the sound of a burner roaring away
yeah nothing quit like it, Thanks for stopping by
baking cupcakes of aluminum... fascinating video. anyone ever tell you you sound like keith jackson, the sports announcer? the "whoa nelly!" guy.
Thank you, Keith Jackson no one has told me that, thanks for watching
That's a really awesome video I appreciate it. Just prove you don't have to wear a belly shirt or have multiple camera angles and music to make a interesting video
Thank you, I try to keep it simple, I ordered a different tip for the burner, it will be in tomorrow, ready to try it out and see if I can get more heat from it, could use more heat in the melting pot, the tip I am using works well in the furnace, and get's the job done in the melting pot, thanks for watching
This is the first time i seen your videos. I felt like i was sitting down next to you. You talking about your projects, stuff around the yard and the weather. I going to build a oil burner just like yours. Thanks for the information and i subscribed cause i like your videos.
Awesome! Thank you! glad to have you on board. I just try to be myself. and upfront and honest about everything I do, I enjoy scrapping, at one time I was going to get out of it, I stopped picking things up and slowly got most everything scrapped around here, then I looked around and said I will miss not having anything to scrap, so I started running my add again, Thanks for stopping by
its so basic but so effective at doing what you need to melt the alloy , but i would use bigger loaf tins instead less handling as it appears to make clean ingots
trash does fall through the hole so some are dirty, so I remelt them in a crucible, and the plan is to keep them small for sand casters to put them into their crucible.
All I can say is ,,you are the man wow
I didn't want to through all that dirty aluminum into the shred, or spend time cleaning it to get 10 cents a lb. breakage price, the plan is to sell it on eBay for $2.00 a lb. If I get to sell it there, I have 2 buyers lined up now. thanks for stopping by
I watch many videos of this type, but never have seen the "put it in and melt what melts." Not sure why, out of 330k views, only 15k subscribed?
Thanks for watching, I wanted to take lawnmower motors and melt them for clean aluminum and sell the ingots on Ebay. a lot of aluminum items it is very hard to get all the other metal off so I thought melting it would work, and I thought waste oil burner would be the way to do it
We've watched lots on the TV so I may have my comments muddled but we enjoyed looking around the outside space and the alu melting👍
it is nice out here, a mile of gravel road, cow's to the north and south, only 4 houses past me so very little traffic, and I have 5 acres. It's hard to scrap and live in the city, too many laws and rules. I may have to do a walkaround of the back field some day
@@Okiescrapper I love living in the country too.
That sounds great because I find it fascinating seeing what beautiful places other people live in!
recyclers would like you to think that you need certain chemicals like special expensive fluxes to melt aluminum without burning it up, but I've just seen different here. Way to go! Also waste oils are much, much cheaper to do the recovery process.
yes trying to keep it simple and cheep, and it's a lot of fun, Thanks for stopping by
The T 1000 terminator is very scared of this man
lol. I only want the aluminum parts
you know when your melting like this you can record 3 or 4 hours of vid but just release it over a week or two in 1 hr segments a lot of channels do that
More fun than making cupcakes thats for sure!
you got that right. thanks for stopping by
Great and simple setup. Just FYI, 4 nuts to remove the fan , then once that’s off there’s another 3 or 4 holding the steel bracket on. Definitely a lot easier than grinding it off.
yeah I took it into the shop and broke it down
Torch? --- Maybe I'm showing my age before everybody started using cutoff wheels for everything.
Nice job
Thank you! Cheers!
I bought a devil forge to melt beer cans but to be honest I prefer the look of that. I'll still use the gas burner from it but I'll be able to just pour them in by the bag full instead of loading them into the crucible one by one. Cheers for the great idea.😉👍 I subscribed a couple of days ago after watching you strip the compressor down.
welcome, the main reason I built the melting pot is lawnmower motors, lot's of bolts and metal sleeve hard to get totally clean so you have to sell as breakage or irony aluminum, so here I can melt it into ingots and sell them on eBay
@@Okiescrapper I was planning to sell bars on eBay too. Copper bars can fetch £50 if they are stamped and exactly 1kg and polished. Do you follow big stack d channel? That's where I got the idea of the forge and selling the bars. It's a lot more than scrap price for a little time spent. I'm not sure how much aluminium bars sell for but I thought making high priced useful things from it to sell.👍😉
Wicked cool furnace you got there 👍
Thanks 👍 aluminum breakage pays so little thought I could melt it down and sell the ingots on eBay to sand casters
@@Okiescrapper I don't know about your scrap yards but mine buy hand poured ingots. They take hand poured aluminum and copper. I'd just sell them to the yard if you can.
I would love to do that but I haven't got the conference thanks Howard
it is fun and relaxing, kind of like sitting around a camp fire, but louder
Or maybe the confidence
Very interesting . Good job. Please be careful. Many dangers. Breathing the air is usually forgotten quick
Thank you, I will and thanks for watching
Get “u self” some lotion or gloves. Those are the hands (palms) of a working man! The video is great, but the audio (commentary) is very well done, too! Please don’t think I’m criticizing, quite the opposite. Only Respect. Very informative.
You should change your name to Metal Chef! Lol. The baker of metal.
gloves are kind of on and off for me, when I handle sheet tin I know how it can cut you so I ware the gloves but at times I just do it bare handed not the tin I know better, I have always enjoyed working with my hands, Thanks for stopping by
Brilliant video...
Some say videos should be short...
and edited...
I haven't watched you before and was unsure at beginning then the next 50 minutes went quick..
As you say in reply to another comment .. you need to hone your camera skills...
But you definitely have the content with what is happening and your narration...
Thank you... Inspiring... both what you are doing and for long form video.
Greetings
from
Mark in England UK.
Thank You some of my viewers ask for long videos, I like short one's my self, but I think if they don't like the long one's they can skip through it. I do try at times to pause the camera for long boring parts. Thanks for stopping by
@@Okiescrapper
Thank you for replying.
I've been having a think and hope this might be of help.
I'll give general idea...
An upgrade on your melting furnace...
Do you still have that big U shaped wood? burning stove?
Is it at least 8 inches larger than an oil drum?
If so...
Cut off end pieces.. so they are about a foot taller than an oil drum..
I would get both ends and make 2 of these..
Put a few bricks in wood burner bit to hold oil drum up..
Remove oil drum...
Add " Air Creet " to just cover bricks... see below...
Put oil drum back in .. fill gap all around with air creet... Might do in stages?
Will need to put a load of iron in oil drum or it will float...
I'm not sure if to cut holes before or after air creet .. annoying as it might be .. probably after... Air Creet will leak out..... It's easy to drill....
Hole for outlet 6 inches square with a gate from top.. at side of bottom of internal oil drum..
Flame inlet at angle pointing down a bit so it swirls... It might take a bit longer but you could load it up and keep lid on.. with little gap... With most exhaust coming out of liquid metal outlet...
Air Creet.. have you heard of it?
Cheap and easy...
It's cement filled with bubbles...
Brilliant insulation...
Stiff foam is made with cordless drill with fan blade .. in bucket of soapy water then add cement etc ...
Ratio is 70% or 90% bubbles and mix in powder and pour quick...
You can make wall panels with it...
One channel I found over a year ago... he doesn't say in some of the episodes .. then .. they are filming in his workshop and he has been doing proper tests... His job is working with cement!
He is making fire bricks... He also paints them with water glass... Which you can make yourself..
They last quite a while... We just cast a load and when they crack swap for another they are really cheap..
Look up..
Air Creet...
The UA-cam channel is Honey Dew Carpenter... I don't know how it got that name...
Also .. have you watched "Oil Burner" channel? He seems crazy but underneath he is very safety aware... Also uses vegetable oil ... He also uses some burners which get even hotter .. one type uses your burner and it goes into a swirl pot and more fuel is added ... really hot...
When it gets warmer I will be casting aluminium name plates for my boat... and some other bits..
I intend to film it and put on You Tube.
Hope this all makes sense and helps.
Mark.
Pretty cool technique
Thank you! Cheers!
today I just got around to cutting up an old propane cylinder while it was filled with water,, ir has a perfect set up for your smelter, a tapered neck with a valve and it is thick walled about 3/16"... i may use the top half of this tank and make a burner like you did just have to line it with fire bricks or thermal material... very interesting how you made your nozzle, would a drip feed fuel delivery as used in old diesel stoves work to regulate the nozzle flow?
I am sure it would work well a drip feed and a blower, I may need to build one myself someday, check out the guy called Oil Burner He has a bunch of good videos on drip feed oil burners and he is back from a 4 year vacation
Hell iv probably got 10 gallons of old oil at the house its yours lol
I think that I have about 50 to 60 gallons on hand, Thanks for watching
Your channel just popped up into my q and I was impressed with your setup for melting metals , well this video was aluminum and very nice and a good way to dispose of waste oil . So now I am a new subscriber to this channel and looking forward to seeing your next one .
Thanks for the sub! and welcome aboard, I do a lot of teardown videos. and I got into melting as the aluminum breakage price is like 10 cents a lb. and I see aluminum ingots going on eBay for $2.00 a lb. and up to about $4.00 a lb. and a guy at work gave me a lot of waste oil about a year ago, for this. so this melting pot has been in the making for a while. Thanks for watching
I think youtube are doing a good job on this lately, I've had so many good recommendations recently! 👍