I have a used E55 with no bulb for some reason. After changing the fuel filter it was impossible to start, I ended up using about 5 psi from an air hose, through a gasket where the gas cap goes. That primed the system great, but it sure was a pain until i figured out that trick.
Good explanation of priming and fuel pickup. Access to tank and pickup tube looked easy on that cabless E50. How to access top of tank and fuel pickup on E55 with cab? Very helpful video. Thanks!
I keep a little 12v inline pump on the truck with several feet of wire with alligator clips. Makes priming stuff so much easier when people run stuff dry (not that it ever happens lol)
Thanks for the information. Looks like the same mechanically injected motor as my 763. I'm unclear on the jet valve, is it just allowing it to bypass to the return line by opening it?
Hey love the content you put out and Im a avid watcher of all your vids! I have a question about a e80 excavator not working the way it i assumed it should..(lol I am far from a mechanic). The right joystick has a rocker and a button on the top of it. The button extends the thumb... and I can't retract it... should the rocker not control the thumb or am I missing a setting? Is there an aux switch I am missing to push????
Enjoy your videos, I have a 341G that the swing brake locks up intermittently. Swings smooth as glass one day and the next will slow down and lock up within 30 minutes, Got any ideas?
Thank you so much for watching and reaching out! Due to my hectic schedule, I am unable to answer all the questions I get on UA-cam. I want to be able to help, but focusing on one person takes more time than I am allotted! (My wife keeps me busy!) If you are in need of assistance, please feel free to reach out and schedule a consultation through our website. This will ensure that I set aside time for your call and even before and after so I can research your issue and work with you to resolve it! Thank you so much for your understanding! www.4tetradgroup.com/consultations
hello, I have a problem with a bobcat e27z, after about 15 minutes of work the controls on the arm become very slow (I checked the hydraulic pump is ok) the tracks and the blade work ok, could you help me with any advice?
As someone who works in bobcat parts, these videos have helped me diag customer issues over the phone. Thanks!
Great job! Your channel is educating owners and is a great service!
Thank you! I enjoy being able to help!
I have a used E55 with no bulb for some reason. After changing the fuel filter it was impossible to start, I ended up using about 5 psi from an air hose, through a gasket where the gas cap goes. That primed the system great, but it sure was a pain until i figured out that trick.
Thanks, I picked some good tips on how to trouble shoot: #1 Don't let me machine run out of fuel.
Definitely #1 on the list!
Love these videos, please keep them coming!!! I own an E20, T450, & MT52. These videos are EXTREMELY helpful!!!!
Thank you. Im new at bobcat and I love it. Your no start videos are very help full I watch them all and learn a lot from you.
Good explanation of priming and fuel pickup. Access to tank and pickup tube looked easy on that cabless E50. How to access top of tank and fuel pickup on E55 with cab? Very helpful video. Thanks!
I keep a little 12v inline pump on the truck with several feet of wire with alligator clips. Makes priming stuff so much easier when people run stuff dry (not that it ever happens lol)
We call that easy money, oh wait it's snowing. Good job
Thanks!
Another good job thanks for posting it.
Awesome job, so they left the bleeder open, that was the key
Thanks!
Thank you for your support!!
Good tip on the primer bulb.
Huh. And the true story finally comes to light. Very fascinating. Fuel system can be a PITA, can't they?!!?!! Thx!!! Stay warm!!!
You really do good explaining thanks
Thanks for the information. Looks like the same mechanically injected motor as my 763. I'm unclear on the jet valve, is it just allowing it to bypass to the return line by opening it?
Great job! Very helpful!
Glad it was helpful!
Hey love the content you put out and Im a avid watcher of all your vids! I have a question about a e80 excavator not working the way it i assumed it should..(lol I am far from a mechanic). The right joystick has a rocker and a button on the top of it. The button extends the thumb... and I can't retract it... should the rocker not control the thumb or am I missing a setting? Is there an aux switch I am missing to push????
Starting fluid and Kubota is a no no.Was there a bleeder valve right above the fuel water separator?
I have a T-650 that has a intermittent aux hydraulic problem. It keeps Turning off the aux hydraulics. Ever seen this ?
Enjoy your videos, I have a 341G that the swing brake locks up intermittently. Swings smooth as glass one day and the next will slow down and lock up within 30 minutes, Got any ideas?
Thank you so much for watching and reaching out! Due to my hectic schedule, I am unable to answer all the questions I get on UA-cam. I want to be able to help, but focusing on one person takes more time than I am allotted! (My wife keeps me busy!) If you are in need of assistance, please feel free to reach out and schedule a consultation through our website. This will ensure that I set aside time for your call and even before and after so I can research your issue and work with you to resolve it! Thank you so much for your understanding!
www.4tetradgroup.com/consultations
hello, I have a problem with a bobcat e27z, after about 15 minutes of work the controls on the arm become very slow (I checked the hydraulic pump is ok) the tracks and the blade work ok, could you help me with any advice?
I have two questions 1) on a 2018 E42 is there a way to adjust the travel speed?
2) where do I find the hydraulic air bleed hose you sell?
On your blade down lever
Great info ....Thanks
Glad it was helpful!
When you post I watch don’t even get to see just listen in the car better than nothing
Haha- thanks!
Why did the gauge say 3/4 tank
good vid dood!!!
Shame on Bobcat for such a poor primer bulb design. They've had plenty of time to make it work correctly. 😬
Thank you for another great video! Keep safe and warm.
Thank you! Will do!