#306
Вставка
- Опубліковано 12 вер 2024
- [Builder's view] Tamiya 1/24 Subaru Impreza WRC '98 Monte-Carlo is in progress.
I will create the details of the door opening step and the side sill area. Then, I will move on to the cockpit and do a bit of work there.
The composer Takatsugu Wakabayashi, known for creating music for games like "Street Fighter V," anime such as "Dragon Ball Super," and dramas like "The World's Most Amazing Stories," has crafted the BGM for this channel. The BGM "Plastic Dream" plays at the beginning of the video (00:06). It's a wonderfully enchanting piece, so please give it a listen.
Follow composer Takatsugu Wakabayashi on social media:
Twitter: / cocoa2448
UA-cam: / @takatsugu
※ Except for the first piece, the other tracks are composed by different individuals.
I will make tweets such as the announcement of the start of the live broadcast on X(Twitter)
/ nandemo_seisaku
Various photos are published irregularly on Instagram.
Instagram / nandemo_plamo
Web site nandemo-seisak...
The photos of the finished product are summarized here plamodel.info
Facebook page / nandemoseisaku
Contact info@nandemo-seisaku.com
#scalemodel
Hi Kenji, sill, and jamb plates really set the look on this. I like your custom sanding blocks for custom work. I'm enjoying your work as usual. I hope that you don't work too hard. Thank you for sharing Kenji, and take care.
Hi Brian, thank you as always. I'm making sure not to overdo it, so I'm okay. However, the summer heat is really tough. Please drink plenty of water and stay healthy!😊
制作動画、穏やかで心地よくてよく見ています。
昔はプラモデルは改造してナンボでしたね。モデルアップされてない車を作ったり。Kenjiさんの制作動画を見ていると、改造の楽しさ・ワクワクが蘇ってきます☺
ありがとうございます。
人それぞれ好きな作り方があると思いますので、自由に作るのがいいですね😊
私は自分のこだわりたいところだけ手をいれる感じです
Fantastic work and details, like always. Well done sir 👍🏼👍🏼
ペーパーのバックアップ材、スチレンボードも良いのですが、お薦めは「カルプ材」です。
厚さは10㎜、14㎜、19㎜、24㎜、30㎜、50㎜とあり、柔軟性に富む上、反発力もあるためペーパー掛けに重宝しています。
主に看板屋さんが使われる材料ですが、問い合わせてみれば端材をわけてくれると思いますよ。
カルプ材は知りませんでしたが、100円でたくさん作れるのでしばらくこれでいいかな…
無くなったらまた考えます。
Maybe simulate a door latch using magnets?
I might not install magnets this time.
❤ВОВРЕМЯ.... СПАСИБО!
Кенжи отличное видео, кое какие приемы принял в работу правда такого пенопласта у нас нет но думаю найду замену
色々な車で車中泊、楽しみにしています!
?
Fantastic work.What may i ask is that flat metal sanding sheet that you use.?
At what minute and second in the video does the tool appear?
You are and artists sir
お疲れ様です。
スタイロフォームはジオラマやビネットの基礎工事によく使いますが、成程…ペーパーの当て木としても利用価値がありますね。
サイドシルやトランク周りの処理って、日本車が結構丁寧に仕上げられていて、欧州車とか比較的いい加減にコーキングされていたりするんですよね。😅
まあ、仕事に対する姿勢というか、職人気質的な問題なのでしょうが、これをまた模型で再現しようとすると下手ウマな技術が必要になってくるという訳わからんことになるんですよー。
まぁ、Kenjiさんなら難なくこなしてしまうのでしょうが。😅
しかし…コンソール周りスイッチだらけのクルマですね。ラリー車だから仕方ないのかもしれませんが…
お疲れさまです。
このへんの造形は複雑なので結構適当にしています。それらしければ、まあいいかと。
(実際ドア開けたときにしか見えないし)
ストリップゴムとかも省略するので、それほどこだわっていません。
確かに外国車はゴムとかも適当なのがありますね😂
コンソールはスイッチだらけなのがカッコいいのですが、トグルスイッチは突起が危なくないのかなとか心配になります。
Only you would count the buttons Kenji- san. Thank you and best wishes.
Thank you, English has some peculiar ways of expressing things.
カメラ変えました?
なんか最近の動画、ピントあってない箇所が多いなと感じます。
カメラは変えてないですが作業により違うところにピントが合いやすかったり。
ちょっと設定を見直してみます
使用してるカメラは何ですか?
amzn.to/3WdmzDC
これですー
大型カッターの刃は、テフロンコーティングされてるOLFAのスピードブレードがお勧めですよ。
そのスピードブレードなんですよ。これ。