Removing a BGA (Destructive BGA rework)
Вставка
- Опубліковано 29 вер 2024
- Teardown Lab - Removing a BGA (Destructive BGA rework)
I will show you how to use a hot air blower to remove an IC. Care and practice rule the day with these if you have a hope in recovering your PCB, take it real slow!
Lets yank a BGA chip and see whats underneath. Scary stuff! Don't be a stranger, please click here for updates: www.backoffices...
Come chat with me on discord / discord
See my recommendations on Amazon: www.amazon.co....
If you would like to buy me a coffee or support the channel you can do so via Patreon at / backofficeshow
I do have some bits and pieces on my web store at backofficeshow.com
Please note: As an Amazon Associate I earn from qualifying purchases. As such links to Amazon products within this video may fall under this. Thanks to all of you who use these links and help support the channel - you are fantastic!
Thanks you lovely people, and keep on tinkering!
Good video... Maybe one of the best, how Not to do
🤣🤣🤣🤣🤣
😂😂😂😂😂
wrong nozzle, is very important to use a big one.
Best Regards.
wrong noozle size, those are for smaller smd parts not large BGA chips 😂😂😂😂
Nooozle nonstarter
Destroying more stuff? that poor bga.
What did it do to you mate?
Its sacrifice educates us all! (also tablet very dead by this point!)
thank you for the informative video; was looking to upgrade a dell inspiron's i7-3537u BGA cpu... i think i'll stick to overclocking lol
Good luck overclocking anyway.
very cruel...........
change a big head
How do I reset a bga chip?
Good video... I have a question for you: What's in the syringe?
Just some rosin flux
sry sir but u damage lots of track i suggest u to use quick fix paste for this and clear it with petrol
Sir , thans for your video, where I can find the syringe for the solution do you use in this process? thanks
after 1 millions video watched, noone ever explain what that water clear stuff you used. so i had to turn on the subtitle to see it. ebay solar flux and nothing came out except basketball cards.. WELP thats it
Solder flux
Za długo to trwało.
how to do it with 88i6745-TFJ1 ?
Japierdziu aleś narobił teraz to poskladaj
Or just replace ram chips :p
hahahaha....
Hmm, preheater needed for that size BGA.
Yeah good advice, they are pretty affordable now as well on Ebay.
NO YOU DESTROYED SOME BUSES
barbad krdeya pcb ko
how much air n heat should be used to remove ic ???
+shahid khan around 8 litres I would guess
:)
INtereseting to see what's inside these things. CHeers :)
Speaking of destroying, is the Dreamcast still on the list for repairing? ;)
+treguard1982 Good point, sounds like a video to be made this weekend!
What solution that you put on ?
Solder flux
@@backofficeshow tq
Hand balling these bga chips can be a little time consuming, especially the 0.2mm ones. Just try not to sneeze mid way through. :-)
haha, Yeah, those balls must be like dust!
The Backoffice A microscope is a definite must have. :-D
+Motovlogger Jamie I've just finished designing a new board, I purposefully avoided the BFA packaging 😀
The Backoffice I think I would have done too. :-D
+Motovlogger Jamie keep an eye out for that hardware, you might just be interested 😀
can u plz tell the station u use
+Ibrahim kayani I can't find exact one as it's too old but this is very similar Look at this on eBay www.ebay.co.uk/itm/152575852690
The Backoffice thank u
+Ibrahim kayani no problem, good luck 👍