I'm gonna ask more out of curiousity sir. -Why wont the fingerprint / touch id work? Isn't the tool in here is literally write the old home button data to the new button? -if i have 2 original iphone button (not jc), the left is original fully functional (fp, touch id works) and the right is from another phone. Can i copy the data from the left button to the right button and then put the right button on the phone and makes the fingerprint / touch id works? Thankyou sir before
Answer 1: You are just copying the serial number form old to new. Unless you can do micro-soldering the firmware chip for touch id is located on the old button. There are some videos that shows how to do it. Based on experience, copying the serial number will make the new button a bit stable when pressing the button. I also would suggest adding the jc-flex cable. I do have the video, and explained why I strongly suggest adding the flex cable. Answer 2: Each buttons are uniquely paired to each iPhones. How🍎do it is to replace the whole screen assembly and they use a proprietary software to reprogram the new screen. This is similar to battery replacement on iPhone XR and above where you literally have to take the BMS flex from the old battery and transfer to the new battery. Even worse if you want to replace an iPhone 11, 12 Series battery besides from taking the BMS flex you have to have the add-on flex to reprogram the battery health percentage. Videos coming soon for that process. Thank you for subscribing and I welcome your questions, comments and suggestions
My iphone 8 home button sometimes won't open. Thus far, I have been able to get it to work again by turning my iphone off then on. Should I replace home button now? Will this 'sticking' keep getting worse?
1. do a backup first of your device 2. try doing a reset of settings. Go to Settings, General, then Transfer or Reset iPhone, then Reset, then choose RESET ALL SETTINGS. 3. Try it out and let me know how it goes. 4. Did you have the screen recently replaced?
@@DaKabayanTek -thanks- I will try and let you know. No I did not replace the screen. It has had a small crack on the side for over a year - could that be the problem? How do I "back up" my iphone?
Hi Shelly * see this link to backup your device, ua-cam.com/video/njNYfKg-IHQ/v-deo.html *if the crack is on the screen and not on the actual home button. Home button should function
There are times that when u dont copy the serial number the button does not function or when u press it is not doing what it suppose to do... when it comes to the touch id feature only apple can reprogram that feature
@@muhammadhabibie6620touch id will not work. This solution in the video is to atleast have some functionality of the home button but again no touch ID function
@@DaKabayanTek very2 informative sir.. I've noted this. So unless we change it in the big 'A' service center, no way to make the touch id works, right? (for any ip below ip X)
Nope, home button is paired to the motherboard that came with it… if u want a touch id to work to another board u need to to bring it to apple and have the display replaced and they have the software to re-serialize the home button. Hope it helps
Clarification: so when I do this, it will be like I never swapped the home button? Everything will be the same, same functionality, but the actual home button and Touch ID. Only Touch ID won’t work
Same functionality, as long as the button u purchase is a JC id home button… yes, touch id does not work. Based on using the Jc Home button… functionality is a hit or miss…
**Touch Id will not function after you replace the original home button *For the home button www.mobilesentrix.ca/home-button-solution-for-iphone-7-7-plus-8-8-plus-se-2020-gold *I would also suggest you also install the add-on flex cable for better control of the home button www.mobilesentrix.ca/restoration-home-button-flex-cable-for-iphone-8-no-touch-id-functionality
Using same button but sensitivity is very high even if i touch clothes or nail with button it start tapping even in my pocket it does touch with my body it start working
Additional question po. Yung lcd naibabalik po yung serial nya kahit wala na yung original serial no. Possible din po kaya yan dito sa jc home button? Di na po ba gagana dito ang touch id?
di ba pwedeng i jailbreak yung iphone 8 tapos iconnect dyan tapos icopy yung orinal serial ng iphone 8 home button at icopy dyan sa replacement? may nakita kasi ako gumawa sa face id wala lang ako nakita sa touch id. thanks
No need to jailbreak para sa home button… yung touch id bro mawawala talga kase serial number lang ang copy nung jc v1s may mapapansin ka sa home button flex mo na may chip siya dun nakastore ang properties ng touch id at only apple has the reprogramming tool for it to work. your other option is to slice the original flex cable and transfer it to a new jc home button kaso u need microsoldering… about dun sa face id talgang need i jailbreak siya para matransfer lahat ng serial numbers walang secure chip yung earpiece flex ng face id kaya posible na palitan ang earpiece flex without losing the face id function.
Dipende po sa location nyo po.. dito sa Canada sa mobilesentrix.ca po ako umorder.. make sure unorder the jc home button at jc home button flex para stable and home button. Also remember hindi na po mababalik yung touch id.
Even if you use an original home button coming from another device touch id will not work. Even the haptic response when you press the home button will not work. That's why I use a JC home button brand so atleast I have the haptic response. I have not tried other brands or class a home button
@@niwdegamali7586 for the home button www.aliexpress.com/item/1005005626381548.html?spm=a2g0o.productlist.main.1.5d7e3b21zwvPCP&algo_pvid=5f1903b8-c20e-426e-8777-b0eb4ad7e344&algo_exp_id=5f1903b8-c20e-426e-8777-b0eb4ad7e344-0&pdp_npi=4%40dis%21CAD%211.75%211.71%21%21%211.26%21%21%40210318cb16931844650823066e35ac%2112000034301991168%21sea%21CA%211851285636%21&curPageLogUid=sAQUu8Yeq7V7 for the flex: www.aliexpress.com/item/1005002484713701.html?spm=a2g0o.productlist.main.31.5d7e3b21zwvPCP&algo_pvid=5f1903b8-c20e-426e-8777-b0eb4ad7e344&algo_exp_id=5f1903b8-c20e-426e-8777-b0eb4ad7e344-15&pdp_npi=4%40dis%21CAD%2124.87%2121.89%21%21%2117.90%21%21%40210318cb16931844650823066e35ac%2112000027412028392%21sea%21CA%211851285636%21&curPageLogUid=CkOneORztYOV
Unfortunately unless u are good with microsoldering you can connect the original flex to the jcid home button. Otherwise, uou have to have it fix thru the Big “A”
Watch the other video that suggest to use a jc flex together with the jc home button. Also as Ive mentioned in my video ur touch id function will not work
@@DaKabayanTek And the copy There's no home button The original home button is broken Is there a product that you can use without copying? Can you recommend a home button?
Hindi na po, ingat nalang or kung natatanggal ang maliliit na glass pede nyo po patungan ng film or transparent tape... kase if u want na maayos physically yung home button need ng apple na palitan yung buong display nya
Di po talga gagana yung touch id... kase yung chip sa original touch id naka pair po yun sa board ng iphone.. Kaya lang po natin copy yung data from the old home button to the jc button para hindi erratic ang pressing behaviour po. Based on my client’s repairs pag di ko po copy yung data masyadong sensitive yung button
@@DaKabayanTek sir tnung lang po ulit pag nagpalit po ng lcd ng iphone n hindi original may nag message alert po b s po n genuie no detect apple?slmat po
@@guillermoherilla2479 kung iphone 11 and above lalabas yun kase tulad ng touch id need iprogram yun sa apple talga... sa battery naman from iphone xr and about may lalabas din nun...
@@caelari1722 hindi po pwedeng ibang brand po pero mawawala na ang touch id function... Apple lang po ang kayang mag program ng touch id function pag nagreplace sila ng screen
Appreciate you making this video in English as well as your native language so everyone can understand 👍
Thank you…
I'm gonna ask more out of curiousity sir.
-Why wont the fingerprint / touch id work? Isn't the tool in here is literally write the old home button data to the new button?
-if i have 2 original iphone button (not jc), the left is original fully functional (fp, touch id works) and the right is from another phone. Can i copy the data from the left button to the right button and then put the right button on the phone and makes the fingerprint / touch id works?
Thankyou sir before
Answer 1: You are just copying the serial number form old to new. Unless you can do micro-soldering the firmware chip for touch id is located on the old button. There are some videos that shows how to do it. Based on experience, copying the serial number will make the new button a bit stable when pressing the button. I also would suggest adding the jc-flex cable. I do have the video, and explained why I strongly suggest adding the flex cable.
Answer 2: Each buttons are uniquely paired to each iPhones. How🍎do it is to replace the whole screen assembly and they use a proprietary software to reprogram the new screen. This is similar to battery replacement on iPhone XR and above where you literally have to take the BMS flex from the old battery and transfer to the new battery. Even worse if you want to replace an iPhone 11, 12 Series battery besides from taking the BMS flex you have to have the add-on flex to reprogram the battery health percentage. Videos coming soon for that process.
Thank you for subscribing and I welcome your questions, comments and suggestions
Also check this link that completes this repair and will make the home button more stable ua-cam.com/video/nb8GBVh0c3g/v-deo.html
Is that button feel like original? I mean has 3d touch in it or worse than original
Its a hit and miss. But i do suggest having the jc flex cable too for smoother response
My iphone 8 home button sometimes won't open. Thus far, I have been able to get it to work again by turning my iphone off then on. Should I replace home button now? Will this 'sticking' keep getting worse?
1. do a backup first of your device
2. try doing a reset of settings. Go to Settings, General, then Transfer or Reset iPhone, then Reset, then choose RESET ALL SETTINGS.
3. Try it out and let me know how it goes.
4. Did you have the screen recently replaced?
@@DaKabayanTek -thanks- I will try and let you know. No I did not replace the screen. It has had a small crack on the side for over a year - could that be the problem? How do I "back up" my iphone?
Hi Shelly
* see this link to backup your device, ua-cam.com/video/njNYfKg-IHQ/v-deo.html
*if the crack is on the screen and not on the actual home button. Home button should function
@@DaKabayanTek -thank you !
Kung napunit po yung original working flex cable at papalitan ng bago na flex cable, gagana pa kaya yung touch ID?
Hindi po
what is interest to copy s/n on 6Gen button if we can't have fingerprint or delete pop-up message? thanks
There are times that when u dont copy the serial number the button does not function or when u press it is not doing what it suppose to do... when it comes to the touch id feature only apple can reprogram that feature
@@DaKabayanTek soo not even tools / program from JC could make the fingerprint / touch id works, is that correct ?
@@muhammadhabibie6620touch id will not work. This solution in the video is to atleast have some functionality of the home button but again no touch ID function
@@DaKabayanTek very2 informative sir.. I've noted this. So unless we change it in the big 'A' service center, no way to make the touch id works, right? (for any ip below ip X)
@@muhammadhabibie6620 That is correct my friend
what if I change motherboard and used the original touchID and change the serial of NSrn same under purple screen will it work the Touch ID?
Nope, home button is paired to the motherboard that came with it… if u want a touch id to work to another board u need to to bring it to apple and have the display replaced and they have the software to re-serialize the home button. Hope it helps
gracias gracias por la información ya podre reparar los botones
Clarification: so when I do this, it will be like I never swapped the home button? Everything will be the same, same functionality, but the actual home button and Touch ID. Only Touch ID won’t work
Same functionality, as long as the button u purchase is a JC id home button… yes, touch id does not work.
Based on using the Jc Home button… functionality is a hit or miss…
@@DaKabayanTek thanks for the answer
where can i buy this button? I've looked and can't find it anywhere
**Touch Id will not function after you replace the original home button
*For the home button
www.mobilesentrix.ca/home-button-solution-for-iphone-7-7-plus-8-8-plus-se-2020-gold
*I would also suggest you also install the add-on flex cable for better control of the home button
www.mobilesentrix.ca/restoration-home-button-flex-cable-for-iphone-8-no-touch-id-functionality
Does it work on iPad home buttons?
Have not tried that sorry
Using same button but sensitivity is very high even if i touch clothes or nail with button it start tapping even in my pocket it does touch with my body it start working
I would suggest adding the home button fpc flex with the jc home button for better performance
Pwede ba to kahit wala na ang original?
Hindi po. Home button po is paired with the logicboard. Saka po this fix is to help you use a new homebutton to have basic functions except touch id.
May store ba sila sa shopee?
Additional question po.
Yung lcd naibabalik po yung serial nya kahit wala na yung original serial no. Possible din po kaya yan dito sa jc home button?
Di na po ba gagana dito ang touch id?
Sa aliexpress po ako bumibili. Macocopy po ang serial number pero since may encrypted chip yung home button hindi po gagana ang touch id.
Can this be done with only JC branded components or can I do that with any non original touch sensor?
Have not tried a none jc home button sorry
di ba pwedeng i jailbreak yung iphone 8 tapos iconnect dyan tapos icopy yung orinal serial ng iphone 8 home button at icopy dyan sa replacement? may nakita kasi ako gumawa sa face id wala lang ako nakita sa touch id. thanks
No need to jailbreak para sa home button… yung touch id bro mawawala talga kase serial number lang ang copy nung jc v1s may mapapansin ka sa home button flex mo na may chip siya dun nakastore ang properties ng touch id at only apple has the reprogramming tool for it to work. your other option is to slice the original flex cable and transfer it to a new jc home button kaso u need microsoldering… about dun sa face id talgang need i jailbreak siya para matransfer lahat ng serial numbers walang secure chip yung earpiece flex ng face id kaya posible na palitan ang earpiece flex without losing the face id function.
So touch id still not working ? But can use for normal button right
Yes button will work normally except the touch id… i would suggest using the jc home button & jc home button flex for better stability
But way the id fingerprint not working??
UPDATE: JC HOME BUTTON works on ios 14.5
Do I need JCV1S? I didn't transfer My serial number. My JCID button doesn't work.
@@corporatetool2563 u do not need the jcv1s you can just put in the jc home button and will work except the touch id
@@DaKabayanTek Thank you for fast reply. Maybe my JCID 6 button is bad. No return function. Even after restart and factory reset.
@@corporatetool2563 try re sitting the home button if still same issue then its a broken jc home button… it happened to me once
Magkano kaya for replacement for iPhone 7?
Dipende po sa location nyo po.. dito sa Canada sa mobilesentrix.ca po ako umorder.. make sure unorder the jc home button at jc home button flex para stable and home button. Also remember hindi na po mababalik yung touch id.
where have you bought apple authorized screwdrivers :P?
Ordered them from a local electronic store that distributes wiha brands… but i am using a different set now
Did you try other brand like class A(replacement or original homebuttom fron another unit. Did it work ?
Even if you use an original home button coming from another device touch id will not work. Even the haptic response when you press the home button will not work. That's why I use a JC home button brand so atleast I have the haptic response. I have not tried other brands or class a home button
I have an iPhone 7 Plus I watched your video but I need more info about shat I’m doing it going to do
Sorry I do not get what you are saying? Mind to elaborate more?
does it work on ios 14.3? bought 2 jcid's from different suppliers none of them worked
Yeah it does work with 14.2.
@@DaKabayanTek o trapi
I mean iOS 14.3
@@mindsetmasterytoday319 havent tried that yet
What about 14.6.
Ok lang ba ios 15.0 yan iphone 7
Yes po, pero suggest ko po use jc home button and jc home button flex para maging stable. Also mawawala na po ang touch id pag pinalitan nyo po
@@DaKabayanTek salamat po ahh. Magkano po kaya ung jc home button at san po kaya mka order
@@DaKabayanTek bka meron po kayong link sir
Philippines po kayo Sir? Sa aliexpress ko po yun kinukuha before@@niwdegamali7586
@@niwdegamali7586 for the home button www.aliexpress.com/item/1005005626381548.html?spm=a2g0o.productlist.main.1.5d7e3b21zwvPCP&algo_pvid=5f1903b8-c20e-426e-8777-b0eb4ad7e344&algo_exp_id=5f1903b8-c20e-426e-8777-b0eb4ad7e344-0&pdp_npi=4%40dis%21CAD%211.75%211.71%21%21%211.26%21%21%40210318cb16931844650823066e35ac%2112000034301991168%21sea%21CA%211851285636%21&curPageLogUid=sAQUu8Yeq7V7
for the flex:
www.aliexpress.com/item/1005002484713701.html?spm=a2g0o.productlist.main.31.5d7e3b21zwvPCP&algo_pvid=5f1903b8-c20e-426e-8777-b0eb4ad7e344&algo_exp_id=5f1903b8-c20e-426e-8777-b0eb4ad7e344-15&pdp_npi=4%40dis%21CAD%2124.87%2121.89%21%21%2117.90%21%21%40210318cb16931844650823066e35ac%2112000027412028392%21sea%21CA%211851285636%21&curPageLogUid=CkOneORztYOV
exist some solution to remplace the touch id function ot work again..?
Unfortunately unless u are good with microsoldering you can connect the original flex to the jcid home button. Otherwise, uou have to have it fix thru the Big “A”
Thank you for the video
You are welcome.
Link of all products please, where I can buy this...
Sorry for late reply.. I got all my parts from Aliexpress.
saan po pala nakakabili ng jc v1s at yung 6th gen. home button?
Aliexpress lang po. Unless nasa Canada po kayo may local supplier po kayong pwedeng pag orderan
I made a purchase
But there's no machine to copy
It doesn't work
Sometimes it works a little and then it doesn't work
Watch the other video that suggest to use a jc flex together with the jc home button. Also as Ive mentioned in my video ur touch id function will not work
@@DaKabayanTek I don't have a jcplex
Then should I buy another home button? I don't know how
@@DaKabayanTek And the copy
There's no home button
The original home button is broken
Is there a product that you can use without copying?
Can you recommend a home button?
@@엘지김-p2j use a jc home button and jc flex for me this brand works the best
@@엘지김-p2jmobilesentrix.com
Pano ba ayusin yung home button na nag crack lang pero gumagana parin naman yung toucg id naayo pa ba yun?
Hindi na po, ingat nalang or kung natatanggal ang maliliit na glass pede nyo po patungan ng film or transparent tape... kase if u want na maayos physically yung home button need ng apple na palitan yung buong display nya
Fingerprint working aur not
Touch id will not work
Pwede po pahingi po ng link sa store kung saan niyo po nabili yung JC Home Button po?
AliExpress lang po Bro
Bkit sir dp rin nagana ung touch id nya king nakacopt nmn ung data?slmat sna masagot
Di po talga gagana yung touch id... kase yung chip sa original touch id naka pair po yun sa board ng iphone.. Kaya lang po natin copy yung data from the old home button to the jc button para hindi erratic ang pressing behaviour po. Based on my client’s repairs pag di ko po copy yung data masyadong sensitive yung button
@@DaKabayanTek sir tnung lang po ulit pag nagpalit po ng lcd ng iphone n hindi original may nag message alert po b s po n genuie no detect apple?slmat po
@@guillermoherilla2479 kung iphone 11 and above lalabas yun kase tulad ng touch id need iprogram yun sa apple talga... sa battery naman from iphone xr and about may lalabas din nun...
@@guillermoherilla2479 san ka Canada bro?
@@DaKabayanTek pnu sir ggwin dun e ririprogram po b ng jc vs1 kya po un?slmat ng marami sir
Paano po yung sa 5s hanggang SE(2016)?
Pag may nakuha akong unit na se idedemo ko ren siya
@@DaKabayanTek yung gagamitin po bang replacement na home button from 5s to SE(2016) galing rin po ba sa JC?
@cutie aycea: wala pong jc home button para sa 5s-se ist gen. meron nabibili na third party pero mawawala na po ang touch id capability...
@@caelari1722 hindi po pwedeng ibang brand po pero mawawala na ang touch id function... Apple lang po ang kayang mag program ng touch id function pag nagreplace sila ng screen
@@DaKabayanTek kaya nga eh, they are against 3rd party repairs, ang iphone 12 nga kapag pinalitan ng camera magloloko na...
What if yung original home button niya ay nareplace na? pano mo gagawin?
The.n jc id home button at jc home button flex nalang ang gamitin mo kaso yung touch id hindi na talga mag work yun
fingerprint unable🤣
Yeah touch id will not work as mentioned on the video..