It turned out great! As far as I know, this amplifier does not turn off completely when the potentiometer is set to 0, only Bluetooth is turned off. Preferably a separate power switch that breaks the circuit.
You could make this video in 20 minutes, well done, educational and explanatory. Example: the laser cutting part at the beginning gets boring, as the pieces are similar and so is the process. You can reduce time. I myself had to advance the video. I'm an editor for 3 channels. Don't be mad, just constructive tips.
You could try engraving the letters deeper, filling with black paint (sand) and then lay the clear. Very nice little battery pack. End result looks good, i've always loved the layered plywood look.
I would like you to make a video clip teaching how to connect a crossover network circuit in detail. Please continue. I just happened to be interested in the circuit you connected in your video clip. But I couldn't keep up with the look. And I don't know Your crossover network is a 2-way crossover. Mid-treble or treble-bass or 3-way treble-middle-sub. If it's not too much of a bother. Please help make a video clip to teach me. I would like to try doing both 2-way audio and 3-way audio. I will wait to follow and watch from Thai fans.❤
Tengo varias dudas, existen laptop que traen el almacenamiento soldado a la placa, puedo soldar a los pines de un USB una adaptador de USB a disco duro? Esa idea funcionaría?, puedo arrancar el sistema desde ahí?
So much material wasted... For folks that actually buy their own materials dont do it like this, with a bit more planning you can save 60-70% of plywood...
Well, you can just use those leftovers for smaller sized objects. But yeah, cutting the individual frames into C-shaped halves and laying them out in a staggered manner, would reduce the amount of full size plywood sheets. 😊
Big Fan of your project but two drivers are completely unnecessary for such a small speaker, because they complicate the Build and bring no advantage. A good Broadband speaker would have been the better choice. Some good options are: Dayton Audio PC83, Dayton RS100-4, Visaton FRS8-4, Peerless TC9FD-18-08, Tectonic BMR65-8 (which is great, with low directivity and a lot of bass), Monacor SPX-30M, Lyeco LY302F, Dayton PS95-8, Tangband W3-315E or omnes audio BB3.01 .
Судя по виду, одна из C50 на TPA3116D. Неплохой усилочек, звук простой, но энергичный и баба на китайском не базарит, заводится от 5V. На Али таких как грязи. Один нюанс: крутилка полностью не выключает усилок, желательно ставить выключатель в разрыв питания
It turned out great! As far as I know, this amplifier does not turn off completely when the potentiometer is set to 0, only Bluetooth is turned off. Preferably a separate power switch that breaks the circuit.
I am listening on Bose headphones and i feel Marshal have more clear vocals and crispy sound. your speaker is good as well for bass & tribal 👍
Wow, that's very cool, I was just thinking about buying a laser, and after watching the video, 100% will buy it, you're a jacket guy
Wetting the leather before embossing will yield a crisper edge.
Looks great! The only comment I have is the back panel can have half the screws he used.
You could make this video in 20 minutes, well done, educational and explanatory. Example: the laser cutting part at the beginning gets boring, as the pieces are similar and so is the process. You can reduce time. I myself had to advance the video. I'm an editor for 3 channels. Don't be mad, just constructive tips.
skip with the right key :))
Looks great! The only comment I have is the back panel can have half the screws he used. Great project!
Great build! Happily provided you with the parts :) Keep up the speakerbuilding!
Increíble trabajo, felicitaciones Sr. Terek
You could try engraving the letters deeper, filling with black paint (sand) and then lay the clear. Very nice little battery pack. End result looks good, i've always loved the layered plywood look.
Might you have the cut file for this? Lightburn?
The Marshall only can hold ur trebble, really great speaker thanks for the vid, really great portable speaker
nice work, so you have a 4S setup, but using a USB-C? you have a step up module or one of those PD things to boost the input to 14v?
I had Harman Kardon Onyx Mini which left 2 adapter speakers on it. Does it could be used to make it?
Excellent project👍
I would like you to make a video clip teaching how to connect a crossover network circuit in detail. Please continue. I just happened to be interested in the circuit you connected in your video clip. But I couldn't keep up with the look. And I don't know Your crossover network is a 2-way crossover. Mid-treble or treble-bass or 3-way treble-middle-sub. If it's not too much of a bother. Please help make a video clip to teach me. I would like to try doing both 2-way audio and 3-way audio. I will wait to follow and watch from Thai fans.❤
wow it's amazing design 😊
Stunning!!!
Simpatiška, stilinga ir originali kolonėlė 👍🏻
Great job! I like what you done. But I trust this speaker not for sell.
están espectacular y debe sonar muy bien, pero al ser portable las bocinas deberian tener alguna protección.
Great work! 👏
Tengo varias dudas, existen laptop que traen el almacenamiento soldado a la placa, puedo soldar a los pines de un USB una adaptador de USB a disco duro? Esa idea funcionaría?, puedo arrancar el sistema desde ahí?
Excellent Work 💝
Да, лазер очень сильно расширяет просторы для творчества 👍
You can grow a boombox with this laser machine to look like JBL
Yeah, I think it's really similar, too.😂
Es un trabajo muy fascinante e increíble 👍🥰
So much material wasted... For folks that actually buy their own materials dont do it like this, with a bit more planning you can save 60-70% of plywood...
My thoughts exactly, there are far more resourceful ways he could have achieved the same result
Well, you can just use those leftovers for smaller sized objects. But yeah, cutting the individual frames into C-shaped halves and laying them out in a staggered manner, would reduce the amount of full size plywood sheets. 😊
Glued plywood, so maybe cutting stripes and curves, and gluing them, you can make all one enclosure with a single panel of plywood.
It's like people don't know how to curve plywood. Or just layer the corners instead of the whole thing. Make 90° layered corners.
I wouldn’t say it’s a waste necessarily, I’m sure he’d have a few more projects in mind that would make use of the leftovers🤷🏽♂️
Wow y como hago para conseguir una de tus creaciones?
La verdad que estoy de acuerdo, tiene muy buenos diseños
Hello, can you make something like Devialet Mania or equivalent to its power?
U come back ❤❤❤❤❤❤
Big Fan of your project but two drivers are completely unnecessary for such a small speaker, because they complicate the Build and bring no advantage. A good Broadband speaker would have been the better choice. Some good options are: Dayton Audio PC83, Dayton RS100-4, Visaton FRS8-4, Peerless TC9FD-18-08, Tectonic BMR65-8 (which is great, with low directivity and a lot of bass), Monacor SPX-30M, Lyeco LY302F, Dayton PS95-8, Tangband W3-315E or omnes audio BB3.01 .
U can just 3d printed the case for it , will be more easy and efficient. But also great job my friend
NICE!!!
What amp are you using?
I think its zk-301 from wuzhi audio
very nice vid hat down
Trust me
If you combine the stepUp chager with LED typeC female
Charging doesn't work well 😁
Какая плата унч использовалась?
Судя по виду, одна из C50 на TPA3116D. Неплохой усилочек, звук простой, но энергичный и баба на китайском не базарит, заводится от 5V. На Али таких как грязи. Один нюанс: крутилка полностью не выключает усилок, желательно ставить выключатель в разрыв питания
Using the laser to even drill holes is crazy
🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩 beau travail j adores😍😍😍😍😍😍😍😍😍😍😍😍😍
how can you charge 13 volt battery by a 5 volt type-c module
Isn't it for charging your phone on the go?
great
show em
Do not solder cables in screw terminals.
And after everything is ready, put a 1200 battery when you put a pendrive in, I can't play 3 songs
❤
So another UA-camr who wastes material, has products and tools gifted but still thinks it’s ok to bombard you with ads
💓
What's the point of doing everything thing with lasers when you have skills😢
IMO Marshall sounds better...
I mean why waste so much material just for the sake of the video 👎
Жирный минус за то что моно !!почему все только стараются сделать хуже ,то что уже есть ,бесите
Laser cutting for nothing,,,skip