**They are £150 each to replace hence the effort to repair but if its too hard Get new ones here** Right hand amzn.to/3JZewWz Left hand amzn.to/3XsZ3B0
IMPORTANT: you have to unlatch the ribbon cable and remove it from the socket Which is important here yet not mentioned, do not tear it off there are separate tutorials on how to properly detach the ribbon.
I managed to fix it ok and yes the ribbon cable is very delicate and you must be careful i was also worried about the glue it used to repair the pivot getting onto the ribbon and damaging it
After hours of active game, my right trigger spring does not working and falls inside. Probably I will do the same job. Already fixed the left one...damn why those things are so expensive... At least 60$ one...but bot 150$
What happend with my controller is that my home button broke and I had to factory reset my headset and I can’t get back on what should I do because I can press the button but the light won’t show up
Im somewhat annoyed here, 6:05 so with the Torx 4 screw driver i got all eight screws but then the last one is pentagon or hexagon shapes it has 5 or 6 sides to it, and i dont have a screwdriver for it, it looked the same and same size but ofcourse it had the 1 singular different screw
I solved where the main trigger works. There is a bar that holds it together. Be careful as the spring may somehow launch from the work area. Remove the bar. The spring can fall out at this point, but the inner side should be hooked *underneath* the motherboard. When putting back the spring, bar, and trigger; lift the motherboard until you can hook the semi-circle part of the spring around where one of the screws would go (a screw from the top, not motherboard side). Release the motherboard and screw down the motherboard. Insert the two prongs of the spring into the trigger. It should come in contact with a hidden metal plate. Flex the trigger and watch the spring from flying out. Re-insert the bar. Congrats, you removed the main trigger and put it back.
**They are £150 each to replace hence the effort to repair but if its too hard Get new ones here**
Right hand
amzn.to/3JZewWz
Left hand
amzn.to/3XsZ3B0
SCAM, they cost half that at Meta store mate!
Why not post the link and share the saving on here then?
they cost £69.99 direct from meta, usually take two days to arrive
Share the link then
@@DeathLazerBoy here u go www.meta.com/gb/quest/accessories/quest-2-controllers/
IMPORTANT: you have to unlatch the ribbon cable and remove it from the socket Which is important here yet not mentioned, do not tear it off there are separate tutorials on how to properly detach the ribbon.
I managed to fix it ok and yes the ribbon cable is very delicate and you must be careful i was also worried about the glue it used to repair the pivot getting onto the ribbon and damaging it
can you put a link to a vid on how to do that plz
Sorry I just eased it out with the tweezers slowly. I didn't capture it on video I apologise. Just be gentle
After hours of active game, my right trigger spring does not working and falls inside. Probably I will do the same job. Already fixed the left one...damn why those things are so expensive... At least 60$ one...but bot 150$
Yeah really expensive go careful and prepare before fixing
What happend with my controller is that my home button broke and I had to factory reset my headset and I can’t get back on what should I do because I can press the button but the light won’t show up
Have tried to fix the home button?
Thanks for the video, had the same problem with a loose trigger. The plastic twisted off and its beyond reparable. Thanks for nothing meta....
Thanks for watching good luck rebuilding it
So a ribbon cable in my oculus quest 2 controller ripped is there any way to fix it?
Oh dear in theory if you connect the torn parts back up but you could buy a broken one on ebay and use it for parts 😉
@@DeathLazerBoyAll right I'll try. Thanks for answering.
What was the super glue you used?
This stuff
amzn.to/3JF2ZKI
Where can I buy that same broken part to replace it?
Here amzn.to/3pC7Ntf
Or here cheaper ebay.us/o7zWn3
does anyone know what the wires in the ring are and if there detached then i can reatach them
Sorry just did the trigger
Thanks for showing what kind of screws go where
Its a pleasure glad to help please consider subscribing to help me grow the channel
Hi, what is your screwdriver. I need it
I used a Torx 4 best get a nice set here
amzn.to/3XB4Gy8
@@DeathLazerBoythanks my friend
You're welcome thanks for the support please subscribe if you can
Thanks! Logre repararlo, espero que la reparacion dure mucho tiempo.
Si, espero que quede reparado. Gracias por el apoyo, suscríbete si puedes para ayudar a que mi canal crezca.
Thank you so much
You are more then welcome 🙏
Please consider subscribing to help me grow the Channel
dang i didn’t know jumping far gives your legs the ability to go through chairs
Lol brilliant
How did you get the top part separated from the bottom. There is a ribbon holding them together.
I used a small jewellers screw driver to ease it out
Flip the ribbon holder up and pull the ribbon out
Im somewhat annoyed here, 6:05 so with the Torx 4 screw driver i got all eight screws but then the last one is pentagon or hexagon shapes it has 5 or 6 sides to it, and i dont have a screwdriver for it, it looked the same and same size but ofcourse it had the 1 singular different screw
It always good to have a set
@@DeathLazerBoyi bought the set that you provided in the description and now i have to get a new one?
@@DeathLazerBoy we figured it out, the screw was like grinded some how and it lost its shape, we had tape and a screwdriver and it eventually worked
@@Ryber1 glad you got it sorted 👍🏻
@Ryber1 that's a shame I was certain it was to correct kit
My trigger is stuck that's grip button
I Hope its working now, did the video help
He means the Main Trigger, not Side Trigger
I solved where the main trigger works.
There is a bar that holds it together. Be careful as the spring may somehow launch from the work area. Remove the bar.
The spring can fall out at this point, but the inner side should be hooked *underneath* the motherboard.
When putting back the spring, bar, and trigger; lift the motherboard until you can hook the semi-circle part of the spring around where one of the screws would go (a screw from the top, not motherboard side). Release the motherboard and screw down the motherboard. Insert the two prongs of the spring into the trigger. It should come in contact with a hidden metal plate. Flex the trigger and watch the spring from flying out. Re-insert the bar.
Congrats, you removed the main trigger and put it back.
That's right we'll done
The trigger cover is stuck at the top
Dismantle and remove obstacle
Jesus, take it easy…
Thanks 👍🏻
dawg i said trigger not grip:((
To what do you refer ?
I think I’ll just contact oculus support and get myself a replacement…
Let me know how much they charge for a new control please
@@DeathLazerBoy they charge $70 but warranty is also really nice
Thanks for letting me know that's cheaper the a second hand one at £80 that's why I fixed it
Oof looks like hard work
Yes it was but a new handset is £150 plus so not much choice