Very good exercise. Thank you for teaching the pattern fill tool. Also seen in exercise 63, which gives a beautiful texture. all the best to you always🙂👉✍
Wonderful. App ke model ka jawab nahien . Hamaisha he intezar kerta hon ke kab koi upload aay aor meray jaisay ko kuch seekhnay ka moqa mil jay. Hamaisha khush rahiay . Aameen 👌👌👌👌👌👌👌👌👌👌👌👌👌👌 🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲
I'm looking for use cases of Faces to be input at the "Faces to Pattern" under the option Features and Faces. Can you please tell how that option can be usabel or any reference. Thanks.
Great work dude I tried perfectly did that model Haven am problem in sweep in circular profile doesn't exists in my software so I make 2 sketch for swept boss
You can use 'Through All' only which creates a though all cut in one direction. In the video i says don't use 'Through All - Both' because this will give some errors which fill pattern
Your tile is deceiving. You're not creating the pattern on a curved surface - you're creating a fill pattern on a flat surface and cutting a curved surface. Very different.
Okay 👍, it might be useless for you but very useful for some people I also created so many tutorials on curve driven patterns. You can watch it if you wish Happy Modelling 🤗
Sir your tutorials always helps me to do my work faster. Thanks for these valuables tutorials.
Welcome 😇
Very good exercise. Thank you for teaching the pattern fill tool. Also seen in exercise 63, which gives a beautiful texture. all the best to you always🙂👉✍
Welcome 🤗
And, Thanks for watching 🤗
Thanks for the excellent work.
Welcome 😇
Very smart. Elegant.
Thank you 🙏🤗
Very useful tq. EASY CAD
Welcome 😇
And, Thank You for watching 🙏🏼
your hex shape is stretched. Meaning, the hex at the top of the dome is not the same shape as the ones near the rim.
Yes, you are right
What do you offer to do? How about wrap?
❣️keep it up bro👍🏻✌️✌️
Thank you 🙏
And, Keep Supporting 🙏🙏
Wonderful.
App ke model ka jawab nahien . Hamaisha he intezar kerta hon ke kab koi upload aay aor meray jaisay ko kuch seekhnay ka moqa mil jay. Hamaisha khush rahiay . Aameen
👌👌👌👌👌👌👌👌👌👌👌👌👌👌
🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲
Thanks for watching Saquib Bhai🙏🙏🙏🤗
Excellent!
Thanks for watching 🙏🏼
Keep Supporting Guys🤗
I'm looking for use cases of Faces to be input at the "Faces to Pattern" under the option Features and Faces. Can you please tell how that option can be usabel or any reference. Thanks.
Thanks for your suggestion
I will make the tutorial on it
Precioso 💫👏👏👏
Thanks 🙏🙏
Do You have Online Kurses or Lessons or like this. Tanks...
Not, But will be soon
👍👍👍👍👍
👍
Please Support my Channel, thanks 🙏
Great work dude
I tried perfectly did that model
Haven am problem in sweep in circular profile doesn't exists in my software so I make 2 sketch for swept boss
Yes, because you are using the solidworks version below 2018
And, Thanks for watching
4:45
MVP
?
When is says “do not use through all” for the extruded cut what should I use instead ?
You can use 'Through All' only which creates a though all cut in one direction. In the video i says don't use 'Through All - Both' because this will give some errors which fill pattern
Can you help me to place honeycomb pattern on my part ?
Yes, Sure
Please contact me via WhatsApp +919793662583 or mail me at nishant13071992@gmail.com
sir i have a question want to ask u .some step i cant understand
Kindly, Mention the steps i will explain it as best as i can
Thanks for watching 😊
The title is slightly misleading. I expected a curved pattern projection as well. Is that even possible?
Okay 👍 Thanks for your feedback
It's possible by using wrap tool in solidworks
superb
Thanks for watching 🙏🏼🤗
Nice
Thanks 🙏
Great video! I have a solid modeling problem. Could you review , I'll compensate you for your effort.
Thanks 👍, Kindly Mail your problem on my mail ID nishant13071992@gmail.com
You could’ve just used emboss cut, and done a different depth for each concentric shape. Would’ve been done in 1min
No, It takes longer time
💓💓
Thanks ❤️🙏
How to download software for free?????
Don't know
Your tile is deceiving. You're not creating the pattern on a curved surface - you're creating a fill pattern on a flat surface and cutting a curved surface. Very different.
Thanks 🙏👍😊
Can you draw a square trapezoidal rattan basket
Yes, I will try to make it
Could you please share the link of that rattan basket?
this is no curved driven pattern - so 12 minutes just to extrude cut on curved surface with blind - useless tutorial
Okay 👍, it might be useless for you but very useful for some people
I also created so many tutorials on curve driven patterns. You can watch it if you wish
Happy Modelling 🤗