@14imballin Depends on weight vs horsepower and many other variables. If the car hooks and pulls a decent 60' it should be able to run 10's with the horsepower you said. My car weighs 2900# with me, i have around 440-450 RWHP and my car dead hooks 1.4 - 60ft , she goes 10.70 Naturally Aspirated - My converter and cam are setup for nitrous, so I'm leaving some on the table when i make N/A passes. She picks up a ton when i spray the juice though.
@14imballin 450ish to the wheels N/A. about 750-800 on nitrous. New motor is going together now. Twin turbo huge heads and maybe some nitrous. Should be a 8's car easy.
is it just me or is there a wire hanging loose by your exhaust. Looks like a sensor or something. Gonna build a ranger to do the 1/4 mile in low 9 or high 8s. Also you happy with the mighty C4. I've been thinking of getting it for my application.
I haven't been to OSW since this run - They are ridiculous and unfair when it comes to tech. It pisses me off. That's why iv taking some time away. They really wont like me when i spray the 250 shot to it - wheel stand to the 60' !
@decorativefoamboy I havnt been racing in a while, after the huge wheelstand incident :) Check out the newest video to see that action! Anyways, these numbers are from memory but im pretty sure they are close. Total weight without driver: 2790. Rear springs 115# and the fronts are 110#. Both were QA1 springs. Thanks for watching
@overcash1202 You sure do have a nice car! Loved watching your videos of your bad ass ride. My combo is setup for heavy nitrous use. It went 9.80's on a test past with only a 75 shot. Fuck you hater. kthxbye
@14imballin Depends on weight vs horsepower and many other variables. If the car hooks and pulls a decent 60' it should be able to run 10's with the horsepower you said. My car weighs 2900# with me, i have around 440-450 RWHP and my car dead hooks 1.4 - 60ft , she goes 10.70 Naturally Aspirated - My converter and cam are setup for nitrous, so I'm leaving some on the table when i make N/A passes. She picks up a ton when i spray the juice though.
Im running a 9.5" TCT Converter, its stalls about 45-4700 but i launch off 2-step at 4200. Im running a Mighty Mite C4 with 3.73 rear gears.
@14imballin 450ish to the wheels N/A. about 750-800 on nitrous. New motor is going together now. Twin turbo huge heads and maybe some nitrous. Should be a 8's car easy.
@14imballin On that 515hp you need to factor in drive train loss of 15%-20% so that puts you around 415hp-430hp to the wheels
Yeah thats the stock VSS and NS harness hanging down, its not being used and needs to be clipped.... Good luck with the ranger build man.
AJ
is it just me or is there a wire hanging loose by your exhaust. Looks like a sensor or something. Gonna build a ranger to do the 1/4 mile in low 9 or high 8s. Also you happy with the mighty C4. I've been thinking of getting it for my application.
@JRDbuilt Thanks for the info buddy, i keep that in mind.
@ChromedOutDubs Got it thanks, did the wheel stand break stuff?
I haven't been to OSW since this run - They are ridiculous and unfair when it comes to tech. It pisses me off. That's why iv taking some time away. They really wont like me when i spray the 250 shot to it - wheel stand to the 60' !
Was it fun scraping that burnt rubber off the side of your bumper? do you have any tips for the easiest way to get it off without harming the paint?
@decorativefoamboy I havnt been racing in a while, after the huge wheelstand incident :) Check out the newest video to see that action! Anyways, these numbers are from memory but im pretty sure they are close. Total weight without driver: 2790. Rear springs 115# and the fronts are 110#. Both were QA1 springs. Thanks for watching
Car runs hard, what inch converter are you running and what is the stall speed? also what gears are you running?
@Crossman69 Thanks man
@ChromedOutDubs your car a true roller motor?? with roller bearings and roller camshaft?
Did you ever get the car on the scale ? and what springs did you have or what springs did you end up going with ? Thanks .
anything that work for removing bugs and tar... like bug and tar remover lol
With that MPH I would have expected 60's or 70's.
That car weighs 2800lbs?
Can't wait 2 build my 347 man
@overcash1202 You sure do have a nice car! Loved watching your videos of your bad ass ride. My combo is setup for heavy nitrous use. It went 9.80's on a test past with only a 75 shot. Fuck you hater. kthxbye
@str8isSexy Thanks
10.83 and 124 out of a NA 408. LOL Shitz weak...