Print Gocco - Using Print Gocco to expose StencilPro.
Вставка
- Опубліковано 27 сер 2024
- In this video I show you how to use Print Gocco as an exposure unit for StencilPro. No flash bulbs Required!
#printgocco #stencilpro #silkscreen #diy
----
Exposure times for Print Gocco B6:
Sunlight - 30 seconds
Artificial Light - 3 minutes*
*Light used is Daylight CFL bulb - 1600 lumens, 5000 kelvin.
Cut StencilPro film and black construction paper to approximately 4 5/8 by 6 5/8 inches.
-----
Bulbs are available from any of these national hardware stores:
Lowes - low.es/2HD3yWK
The Home Depot - thd.co/2HMsMj6
Im here from Dr. Stone season 2 episode 2.
thank you .. great demo ..