Nibbling out concave curves is a messy business (that you must clean up straight away) however it comes in very useful to us craftsmen who do not have the blessing of a scroll saw. If you're going to have a go at this, be sure to use proper grozing pliers, anything else will surely end in tears....
If you are aggressive with nibbling there will probably be deep undercuts if you have not developed a good crack below the score line. Therefore, it is important to score the line and get that crack well established before nibbling out! I ALWAYS finish off the curve with my grinder to smooth out imperfections.
I could watch your videos all day. I'm learning so much and the music is so soothing. Thanks so much for taking the time to share you skills so we can learn too.
Always great to see a skilled mechanic in action. I laugh when I read a post telling you you are doing it wrong. Apparently their way is the only way. Thank you for sharing the knowledge, insight and feel of the glass you have gained throught the many years of study.
You make it all look so easy, very inspiring, all your videos are fascinating to watch, I cant get enough of them. Thank you I am enjoying and learning a lot
Hi, I just started out , getting my ducks in a row so to speak. I’ve watched a lot of videos to get me started. I have to say that watching your work, gives me confidence, that taking my time and practice is essential. I hope to be as good as you one day. That’s for your tutorials. Julia.
Wow! Weeeee!!! Just watched this second video. ah yeah, pretty sure I'm in love with you now!! You are THE GLASS MASTER! Thank you for sharing the mad skills friend.
I have a pair of grozing pliers bought by mistake and have never used them. I will hurry to the shop to try this. You are a master of glass work and a master of video making. Thanks.
good luck Denis, and remember that piles of nasty ass chips can fly off EVERYWHERE so be prepared to clean up afterwards. Oh, and use safety goggles to protect your eye balls!
I used my grozier pliers in the wrong way all my life :D Thanks for the video, the explanation and it's always tricky to cut these kind of curves. I love your videos!!! Cheers from the other side of the world according with the map... Uruguay, South America
I have been making Stainglass pieces for more than 20 years. I’m completely self taught and consider my work pretty OK. But your Finesse of the curve cutting is fantastic. I never knew that you should score / tap before nibbling. Thanks!
Yes you have a point, however this clip is about making big use of the grozing pliers in a known & successful manner. This is what grozing pliers do best, so that is exactly what was demonstrated. If you like, I can do the same thing with a cutter, in fact it's a great subject for another clip a?.... thanks Dishwater....
Thank you- You make it look so do-able. Tapping the score line first after scoring is the step I'd been missing. Won't need to buy a ring saw if I can master this!
After watching this video, I feel like I can do it. I had problems with a concave piece and just realized I didn't score it prior to attempting to nibble it into shape. Don't know what I was thinking, doh. Thank you!
Loving these Vids. Very Inspirational. I bought a cutter well over a month ago, been nervous about trying, as I Don't want to screw up. (yes I have more issues than Playboy) So, thank you ever so, M
Love your videos. They are so helpful. One little suggestion, when you are tapping so that we can hear the change in pitch, stop the music. It makes it hard to hear. Thanks for all of the help!!
That's a great idea :) I will have to beg friends for some though because I don't drink :P I like playing with LED lighting so was thinking of something using that as well to provide the light for the shards. :D - Heidi
That is so cool and what beautiful work. :) I kept thinking about the chips though *laughs* I am such a 'waste not, want not' person that I kept thinking what could be done with the larger ones besides throwing them away. I thought could put the chips in a clear candle or maybe something else that would turn out clear so you could see the chips in the light but be more permanent than a candle. My mind is churning. :D - Heidi
Sounds like you need to "run out" your fear so that you can get on with the task without distraction.... Here's what you do,..... get a bunch of 3mm float glass (plain window glass) and just start cutting it into smaller pieces. You don't care if you may "do some wrong" because you have only seek to practice and it's not going to be used for anything.... Just cut it to bits, then cut some more...... You will need to be using a quality cutter and use oil to make the job easier.... Keep on cutting until you are feeling relaxed about it all...... See, no big deal now a... :-) Good luck Lisa
You are amazing at your craft. I wish you would talk more, you have a beautiful Aussie accent. I hope someday I can achieve the level you are at stained glass. I guess you really don't have to have all the expensive tools to accomplish the little things. Thanks so much for your videos. Keep them coming I am learning so much.
Brand name..... ahhhhh? however as nibbling pliers, they do have jaws made specifically for this task. Not any old pliers will do this job therefore it is necessary to buy a pair from a glassers store.
Do you know if this technique will work on a Agavero Tequila bottle? I would like to cut the "leaves" on the bottle out. Or do you know what technique will work?
are you drawing these directly onto glass? I'm too intimidated about ruining my work if I do that, but I'm not afraid to try. I have a problem reading the explanations, with the bright pink against the light background. could you use darker, simpler letters? I don't see very well anymore, and I'm sure I'm not the only one. Great videos, btw!!
Yes the template is traced around with a marker pen. These marks will come off with cleaning the glass before the foiling. If you need to, pause the video feed to read the text....
definitely, you must cut / complete the concave curve (inside of the crescent moon) FIRST! Once you have that, then score and break out the outer circle curve..... good luck mate.. :-)
Interesting. I see you are not using running pliers for breaking off the long bits. Why, I wonder? And I am trying to make long slivers of glass, I guess the glass nipper tool is for that, however, I can't get my grosser to break off little corners. Not sure why!! It doesn't do a damn thing. Thanks
I need help! I score, tap to enhance the score, but cannot really tell if the pitch changes. I end up breaking more glass than I want to...what can I do?
Hi Greg, the main reason things go wrong is because the cutter fails to score a good line..... That's because it is either blunt and simply can not scratch properly, or it's the users error by failing to apply enough pressure to the task. Practice makes perfect, so grab some plain 3mm window glass and cut it up,..... If you buy a new self oiling cutter, you understand how easy the job can be, you'll hear it "chatter" when it's going well..... good luck dude.
Why would you want to use the grozing plier like that? Another perhaps easier way would be to cut small curves into the crescent and use the grozing pliers to gently break each curve and then remove and then grind the rest. Surely that would be easier and faster?
I had no idea such dep concave were possible using grozing pliers! Thank you. I wish I'd seen this video long ago!!
Nibbling out concave curves is a messy business (that you must clean up straight away) however it comes in very useful to us craftsmen who do not have the blessing of a scroll saw. If you're going to have a go at this, be sure to use proper grozing pliers, anything else will surely end in tears....
Thank you, thank you, thank you for your easy to follow, in focus, up close videos on how to work with glass. Your skills are inspiring.
that is the best lesson on grozing ive seen to date Great job and God bless
If you are aggressive with nibbling there will probably be deep undercuts if you have not developed a good crack below the score line. Therefore, it is important to score the line and get that crack well established before nibbling out!
I ALWAYS finish off the curve with my grinder to smooth out imperfections.
Thank you for sharing this knowledge. I did not know grozing pliers were so useful.
You vides have been such a HUGE help to this newbie...thank you soooo much!
Also, never knew about, “divide and conquer. “Thank you so much!
I could watch your videos all day. I'm learning so much and the music is so soothing. Thanks so much for taking the time to share you skills so we can learn too.
Always great to see a skilled mechanic in action. I laugh when I read a post telling you you are doing it wrong. Apparently their way is the only way. Thank you for sharing the knowledge, insight and feel of the glass you have gained throught the many years of study.
Thank you so much! your videos are still helping us beginners!
I've learned a lot from your videos. Thanks!
Excellent David, now, go forth and multiply your glassers creations.... haha enjoy... :-)
Well done! I've always heard that the flat side of the pliers goes on top, but you clearly are getting the result.
You make it all look so easy, very inspiring, all your videos are fascinating to watch, I cant get enough of them. Thank you I am enjoying and learning a lot
Hi, I just started out , getting my ducks in a row so to speak. I’ve watched a lot of videos to get me started. I have to say that watching your work, gives me confidence, that taking my time and practice is essential. I hope to be as good as you one day. That’s for your tutorials. Julia.
Thank you for the video. I am taking a stained glass class and your video has helped me to understand so much more. Thank you again.
You are so welcome!
I've been using my groziers upside down all these years !! Thank you for showing me how it's done :)
Thank you!! Sometimes I can do it, and then I lose the knack-- SO helpful to come here and watch "how it is done".
Wow! So glad I found your channel. Looking to start working again and I need inspiration. Love your tips!
Wow. You are the glass whisperer!
The best video for cutting curves! So satisfying and I learned a lot. Thank you so much for this!
Wow just wow. I'm inspired to keep trying. Thank you
Man watching your videos always inspires me. I have never had good luck with nibbling, but im ready to give it another go. Thanks for the video!
very nice cuts, I learned something new today, thank you
Thank you for this amazing video! Your cutting skills are incredible.
Wow! Weeeee!!! Just watched this second video. ah yeah, pretty sure I'm in love with you now!! You are THE GLASS MASTER! Thank you for sharing the mad skills friend.
I have a pair of grozing pliers bought by mistake and have never used them. I will hurry to the shop to try this. You are a master of glass work and a master of video making. Thanks.
good luck Denis, and remember that piles of nasty ass chips can fly off EVERYWHERE so be prepared to clean up afterwards.
Oh, and use safety goggles to protect your eye balls!
I used my grozier pliers in the wrong way all my life :D Thanks for the video, the explanation and it's always tricky to cut these kind of curves. I love your videos!!! Cheers from the other side of the world according with the map... Uruguay, South America
SAME, i've been using the flat side as breaking pliers this whole time didn't realize how effective this other use is
I have been making Stainglass pieces for more than 20 years. I’m completely self taught and consider my work pretty OK. But your Finesse of the curve cutting is fantastic. I never knew that you should score / tap before nibbling. Thanks!
I really enjoy watching your videos. I'm very new to the hobby but your insight has been very helpful already. Thanks!
Just sharing the skills... :-) Good luck..
Super helpful. Thank you
I love your videos they are so helpful. Thank you.
Learned a lot. Thanks
Brilliant video. I didn’t think my grozing pliers were any good-turns out I’ve been using them all wrong! Thank you
Amazin work. Thank you so much for presentation. really appriciate.
I'm getting back into stained glass after a several year hiatus. I really enjoy learning different techniques so thanks for sharing your expertise!
Amazing. Thank you for sharing this.
this was so helpful. thank you!
Yes you have a point, however this clip is about making big use of the grozing pliers in a known & successful manner. This is what grozing pliers do best, so that is exactly what was demonstrated. If you like, I can do the same thing with a cutter, in fact it's a great subject for another clip a?.... thanks Dishwater....
I just bought a pair to help cut with some odd glass shapes, thanks for teaching me how to use them!
Love your videos! thanks. Just got a grazing plier nad naturally I was using it wrong...so thank you for your help!
Thank you- You make it look so do-able. Tapping the score line first after scoring is the step I'd been missing. Won't need to buy a ring saw if I can master this!
Nice work very helpful thanks
Thanks. Looked good.
Excellent video!
After watching this video, I feel like I can do it. I had problems with a concave piece and just realized I didn't score it prior to attempting to nibble it into shape. Don't know what I was thinking, doh. Thank you!
Color me impressed. That was Awesome! Thanks
So helpful!
You are so amazing and helpful! Thank you so much for the great tudoring!
Loving these Vids. Very Inspirational. I bought a cutter well over a month ago, been nervous about trying, as I Don't want to screw up. (yes I have more issues than Playboy) So, thank you ever so, M
Holy cow, I love your videos, thank you ssooooo much for this, your amazing!!!!!
THAT....WAS....AWESOME!!!! I have a tight curve and my glass keeps breaking. Now, I know how to cut it...WOOT! Thanks!
you're most welcome Ron... :-)
Love your videos. They are so helpful. One little suggestion, when you are tapping so that we can hear the change in pitch, stop the music. It makes it hard to hear. Thanks for all of the help!!
Amazing.
Just getting started always lose the corners on tight curves. THANKS
Amazing. You confirm what I long suspected - I rely too much on my grinder! Now how do you foil that tight inside curve?
Coloured bottle clips. Use little shot bottles, fill em with shards, then a clear oil. Display in sunny window.... ?
That's a great idea :) I will have to beg friends for some though because I don't drink :P I like playing with LED lighting so was thinking of something using that as well to provide the light for the shards. :D
- Heidi
That is so cool and what beautiful work. :) I kept thinking about the chips though *laughs* I am such a 'waste not, want not' person that I kept thinking what could be done with the larger ones besides throwing them away. I thought could put the chips in a clear candle or maybe something else that would turn out clear so you could see the chips in the light but be more permanent than a candle. My mind is churning. :D
- Heidi
Thank you. I have to learn to cut more slowly and with more control. I get so panicky when I'm trying to run the scoring line.
Sounds like you need to "run out" your fear so that you can get on with the task without distraction....
Here's what you do,..... get a bunch of 3mm float glass (plain window glass) and just start cutting it into smaller pieces. You don't care if you may "do some wrong" because you have only seek to practice and it's not going to be used for anything.... Just cut it to bits, then cut some more......
You will need to be using a quality cutter and use oil to make the job easier.... Keep on cutting until you are feeling relaxed about it all...... See, no big deal now a... :-) Good luck Lisa
You are amazing at your craft. I wish you would talk more, you have a beautiful Aussie accent. I hope someday I can achieve the level you are at stained glass. I guess you really don't have to have all the expensive tools to accomplish the little things. Thanks so much for your videos. Keep them coming I am learning so much.
Wow!
What strength soldering iron is best??
What brand of pliers are you using? Thanks for all your excellent videos!
Brand name..... ahhhhh? however as nibbling pliers, they do have jaws made specifically for this task. Not any old pliers will do this job therefore it is necessary to buy a pair from a glassers store.
AGONY!!😢😢
Do you know if this technique will work on a Agavero Tequila bottle? I would like to cut the "leaves" on the bottle out. Or do you know what technique will work?
are you drawing these directly onto glass? I'm too intimidated about ruining my work if I do that, but I'm not afraid to try.
I have a problem reading the explanations, with the bright pink against the light background. could you use darker, simpler letters? I don't see very well anymore, and I'm sure I'm not the only one.
Great videos, btw!!
Yes the template is traced around with a marker pen. These marks will come off with cleaning the glass before the foiling.
If you need to, pause the video feed to read the text....
any tips on how to cut half moon shapes to fit over a circle? I keep breaking the end bits...
definitely, you must cut / complete the concave curve (inside of the crescent moon) FIRST! Once you have that, then score and break out the outer circle curve..... good luck mate.. :-)
Cheers Karal ; )
Interesting. I see you are not using running pliers for breaking off the long bits. Why, I wonder? And I am trying to make long slivers of glass, I guess the glass nipper tool is for that, however, I can't get my grosser to break off little corners. Not sure why!! It doesn't do a damn thing. Thanks
I need help! I score, tap to enhance the score, but cannot really tell if the pitch changes. I end up breaking more glass than I want to...what can I do?
Hi Greg, the main reason things go wrong is because the cutter fails to score a good line..... That's because it is either blunt and simply can not scratch properly, or it's the users error by failing to apply enough pressure to the task.
Practice makes perfect, so grab some plain 3mm window glass and cut it up,..... If you buy a new self oiling cutter, you understand how easy the job can be, you'll hear it "chatter" when it's going well..... good luck dude.
karalnz Thanks. I do need a new cutter, I made the other dull. I will keep you posted on the results:-)
Why would you want to use the grozing plier like that? Another perhaps easier way would be to cut small curves into the crescent and use the grozing pliers to gently break each curve and then remove and then grind the rest. Surely that would be easier and faster?
😮