Console Table Build Part 7
Вставка
- Опубліковано 30 лип 2024
- Part 7 of the console table build, cutting the tenons on the aprons using a table saw, dado set, and sled.
00:00 Marking out
02:45 Tenon cutting options
03:27 Installing the dado set
07:21 Cutting tenon thickness
13:26 Cutting tenon width
17:15 Tenon edge rounding
For more information, visit my website at carlstammerjohn.com/?p=1195.
How I make a sled: • Table Saw Sled Build
Excellent video. It's so obvious you have extensive experience. I've cut quite a few tennons on the table saw with a dado set, and I still learned some good information from watching this! Thank you again for your time and contributions!
Good to hear it was helpful. That kind of feedback keeps me motivated.
Can you please give a quick tour of your dado storage caddy? I am almost done making the WoodSmith caddy and they use a coupling nut to hold the blades. Really wanted a better way but my metal lathe is in pieces in the corner of my living room.
Looks like a wooden dowel and magnets?
Yes. Wood dowels and magnets. Works well and easy to access the blades and chippers one at a time. Watch that the magnets aren’t too strong or getting the blades off might be an issue.