If you want to calculate NDVI then pick sentinel 2 instead. It's also free but it got better spatial resolution (10 m) compared to landsat 8. Anyway, neat little video.
Your tutorials are very neat and easy to understand and follow through. I am a marine biologist and new to GIS, remote sensing and spatial analysis. I see most of your videos are taking land-based examples into consideration, would it be possible for you to include a couple of examples that would show include marine/sea related examples such as showing healthy/unhealthy coral reef areas or seagrass meadows using suitable methods? Thank you and your whole team. Please keep such videos coming.
You are welcome. Your previous question on NDVI is what made me realize that I haven't done a tutorial on NDVI, so here you go. Thanks for your inputs.
I appreciate this information. In other videos you began first by applying radiometric corrections and calculating surface reflectance. Is it necessary to do these preprocessings before calculating the NDVI? Thank you.
Good Presentation. Learning a lot. How do you cater for non-vegetation land cover like built-up areas? From the NDVI layer that was produced and with the pseudocoloring given, it is easy to incorrectly interpret all light areas as unhealthy vegetation.
thanks for the tutorial, i have a question that can we calculate the area of water bodies from this map suppose I want to do a comparison of area of water bodies between 2000 and 2020.
How can we merge two different but near by location's landsat images in qgis ? please can you help me with this ( for example: one you have downloaded in this video and it contains whole folder of different bands but of one image, but if you are downloading another folder of same satellite but of near by location ... can we add it together like merge them with each other without overlapping it and if we can then please do tell me on this.....) and do tell the conditions too like we can or cannot merge of two different time images together? like different days and all?
Hi, I want to set up a database of NDVI values over a specific period for crops. The areas are thus very small. I am not sure how to go about this. Is there a way you can assist on that?
sure, check out "zonal statistics". you can type it in the little search box in the corner down left. Then a dialog will come up asking you what raster you wanna calculate statistics from. And if you want to calculate the statistics of a particular area, you have to draw a polygon of that area beforehand
Thank you the entire GEODELTA team, pls I do I use vertices to join points. I don't mean points to line. Points to line will only join for example A to B or C to D. but incase of vertices is connecting more than one points. E.g. A is connecting D and E in case of geodetic network. Using arcgis Thanks
I followed exactly the same steps, but tried to run it on arcgis (arcmap), but unfortunately it shows me the ndvi from 0-1. which is clearly not correct. can you tell me what am i messing up?
Your formula is true for the Landsat 7 bands. However, for the Landsat 8, they have an additional band as number 1. So band 4 in Landsat 7 is like band 5 in Landsat 8.
The voice behind the camera👌 thankyou sir much needed
If you want to calculate NDVI then pick sentinel 2 instead. It's also free but it got better spatial resolution (10 m) compared to landsat 8.
Anyway, neat little video.
Thanks for your comment :)
Similarly, if you're in the US, there's NAIP free 4 band imagery which is 1m I believe
Your tutorials are very neat and easy to understand and follow through. I am a marine biologist and new to GIS, remote sensing and spatial analysis. I see most of your videos are taking land-based examples into consideration, would it be possible for you to include a couple of examples that would show include marine/sea related examples such as showing healthy/unhealthy coral reef areas or seagrass meadows using suitable methods? Thank you and your whole team. Please keep such videos coming.
Thank You My teacher🙂. Really well. Actually, your tutorials improve the GIS knowledge. Stay safe & God bless you sir🙂🙂
You are welcome. Your previous question on NDVI is what made me realize that I haven't done a tutorial on NDVI, so here you go. Thanks for your inputs.
Glad to hear this 🙂
You made it so easy! Thank you for this!
Very clear and detailed.thank you very much
super!! Keep them coming please.
Will do :)
straight forward after going through thousands of videos in google search engine
Elegant tutorials..really nice
Thanks a lot 😊
Thank you ❤️
I appreciate this information. In other videos you began first by applying radiometric corrections and calculating surface reflectance. Is it necessary to do these preprocessings before calculating the NDVI? Thank you.
Good Presentation. Learning a lot. How do you cater for non-vegetation land cover like built-up areas? From the NDVI layer that was produced and with the pseudocoloring given, it is easy to incorrectly interpret all light areas as unhealthy vegetation.
Please make a video how to calculate above ground biomass from NDVI data.
How to calculate the area of each class?
Thanks, why we have to changes the numbers on the classification?
Thank you so much.
You are welcome
Muchas gracias Crack
You are welcome
thanks for the tutorial, i have a question that can we calculate the area of water bodies from this map suppose I want to do a comparison of area of water bodies between 2000 and 2020.
Theorical, you could can do that
thank you very much
You are welcome
How can we merge two different but near by location's landsat images in qgis ? please can you help me with this ( for example: one you have downloaded in this video and it contains whole folder of different bands but of one image, but if you are downloading another folder of same satellite but of near by location ... can we add it together like merge them with each other without overlapping it and if we can then please do tell me on this.....) and do tell the conditions too like we can or cannot merge of two different time images together? like different days and all?
OMG i need to see this for the Factor C, of RUSLE equation, by the way, can you do re RULSE method in QGIS?
is there any need for atmospheric correction before calculation NDVI in QGIS? Landsat level-1 is not atmospherically corrected data?
Hi, I want to set up a database of NDVI values over a specific period for crops. The areas are thus very small. I am not sure how to go about this. Is there a way you can assist on that?
Please suggest a video to use NDVI raster for LULC classification of Landsat 4-5?
Many thanks
How to make NDVI in Landsat 1 MSS image in delta areas?
Hi. Thank you for this very clear tutorial. Is there a way to produce statistics based on the classification output?
sure, check out "zonal statistics". you can type it in the little search box in the corner down left. Then a dialog will come up asking you what raster you wanna calculate statistics from. And if you want to calculate the statistics of a particular area, you have to draw a polygon of that area beforehand
Correct! :)
@@arnaudlrc Thanks!
@@geodeltalabs Thanks!
Thank you the entire GEODELTA team, pls I do I use vertices to join points. I don't mean points to line. Points to line will only join for example A to B or C to D. but incase of vertices is connecting more than one points. E.g. A is connecting D and E in case of geodetic network. Using arcgis Thanks
when band 4 and 5 are dragged and dropped, am unable to see the map on screen, kindly let me know the reason
Beautiful
Thanks
Hi, is there a process for accuracy assessment of NDVI?
Can you make a tutorial on indices based built up index??
Hello, how do I get the area of a specific NDVI range like area difference between vegetation and non-vegetated areas? Thank you!
I followed exactly the same steps, but tried to run it on arcgis (arcmap), but unfortunately it shows me the ndvi from 0-1. which is clearly not correct. can you tell me what am i messing up?
how to calculate NDVI from landsat collection 2 level 2 data?
Unable to download the Landsat Collection 2 Level-2 Product Bundle !!!
How to find out area of this Low and High NDVI area
It is not showing the coordinates of NDVI while making the layout😢😢
i dont get -1 +1 when i do the ndvi why is that
How do you make the boundary.kml file ? I'm blocked to this step
You can just create one by yourself using the 'add polygon' tool of Google Earth Pro
Awsome
Thanks
you used (5 -4)/(5+4), why? I thought it should be (4-3)/ (4+3) for the NDVI value
Your formula is true for the Landsat 7 bands. However, for the Landsat 8, they have an additional band as number 1. So band 4 in Landsat 7 is like band 5 in Landsat 8.
do for us metashape
could you elaborate a bit more? :)