Check this : www.samsung.com/in/refrigerators/double-door/rt3500mh-digital-inverter-technology-236l-titanium-silver-rt28c3032gs-hl/ I will add few links from other brands here
Yes. I assembled. Speed is okay. But noise is high. While using Flipkart refund option I only get the replacement option. Can I replace this and get other model of v guard?
No, this fan height will be suitable for placing near sofa or near bed . If you are looking to use this while sitting on floor or sleeping on floor , then this is not best.
If you want very low noise and medium air delivery go with 1350rpm. In 2100rpm , noise is medium at high speed but air delivery will be much better than 1350rpm.
![ORIENT ELECTRIC STAND FAN ( HIGH SPEED) [2000Rpm] Unboxing and Assembling](/img/n.gif)
I purchased it for ₹2900 and assembled myself. Great help after watching your video.
sir, thank you so much today we purchased Rs.3500 from Girias, but salesman don't know to assemble the partstomarrow i will try, thanks once again
,
Is screw driver available in the package?
No
What the heck 😂
Hi bro,I have assemble the same fan seeing your video , how to stop fan from oscillating , I even pulled lever . Any suggestion ?
Try tightening lever like a screw to fit properly and then try pulling or pushing
Thank you pavan . This saved my day💥
Is this noise is too much,and what about power consumption??❤
Noise level is low to medium (depending on speed level). If you use for 8hrs at high speed approximately 2units of power is consumed.
@@CleanReview thank you bro ,and any double door refrigerator under 23000
Check this :
www.samsung.com/in/refrigerators/double-door/rt3500mh-digital-inverter-technology-236l-titanium-silver-rt28c3032gs-hl/
I will add few links from other brands here
Thanks bro,,, it was helpful.. you saved me from heat today
Is the fan leaf 🌿 made of plastic or metal?
Plastic
Hi bro. How to pull up the inner steel pipe for height adjustment. Cant able to pull up
Hi , At starting it will be little bit tight , Can you try applying some soap or oil around edges from outside and try pulling up .
Yes. I assembled. Speed is okay. But noise is high. While using Flipkart refund option I only get the replacement option. Can I replace this and get other model of v guard?
Yes you can try replacement, Fan which I assembled not getting much noise.
I am facing same issues I tried a lot but it's not opening
how to disassemble this? i m stuck at the rotor blade, cant seem to get it out. pls help
There will be knob on top of rotor blade, try to rotate in clockwise direction (opposite to usual way) to remove it.
@@CleanReview i've done that, but the blade wont come off
@@CleanReview nvm got it thanks. i just needed to pull harder
I purchased for rs .2600. Your video is very helpful for setting this.thankyou
Hello is it working fine
I couldn't loose/remove the small screw can you tell me how to loosen it
Which Screw you are referring to? small and large black holders?
any suggestion to lower the speed of the fan at number 1 only
That's not possible
Please someone tell me whether this stand fan can be used as a table fan.
No, this fan height will be suitable for placing near sofa or near bed . If you are looking to use this while sitting on floor or sleeping on floor , then this is not best.
Cord wire length?
1.5m
Hi my standing fan head doesnt bend how do i fix ir
There will be a screw on one side below fan housing. This screw will help in bending fan by loosening it . Tighten it back after adjusting.
@@CleanReview tried loosening it and tighten it but still goes up again.Btw this is a new standing fan
Then you can try replacement if you had purchased through online .
Which fan is good 1350rpm or 2100rpm?
If you want very low noise and medium air delivery go with 1350rpm. In 2100rpm , noise is medium at high speed but air delivery will be much better than 1350rpm.
Thanks lot. I was searching this installation video
What is the condition now? Is it good?
Yes , It's good . No issues so far
Is round Base plastic or metal ?
Base internally made of some hard high dense material and covered with ABS plastic
Thanks for the video
Thank you 🙏
How to stop oscilation any one can say ......
Pull up knob on top of motor to stop oscillation 03:16
Thank u for ur reply , I did this same but can't stop _ V guard esfera STS N
@@kaushiksarkar1516 try removing knob by loosing it and tighten it back
Much helpful❤
Thanks it was useful
Helpful video 👍
dude that ring does't get tight at all, that screw just comes out. Don't know how to fix it
Ring that used to join two metal frames?
Thank you for the video.
Fan rotating not stoped
Did you tried pulling or pushing knob which is available back side above motor unit?
Same issue@@subhajitnayek7267
Same
Bruh it's working u hv to pull up backside rotating knobs 😅😂 but fan speed not upto the mark okk noise level is medium ...
Thank ❤❤❤❤❤
Fan leaf plastic or metal
Plastic
I purchased for 2350😂
How bro ?
Working good ???
Want to buy
Good
Thanks
Bro rotating problem
Is pulling back side knob not working?
@@CleanReview twice pulling or pushing it's working
😊
Nice
🙏🙏
⭐ Promo'SM
❤
Wrong fitting
Tur mayki r buss
Kowjksksiis🫥
Bro fan is speed is not at all good
In V guard pedestal fans this is only fan with high speed capacity (2100) . Other v guard pedestal fans comes with lower speeds.
I purches today flipkart 2490 rupees
Thank you!!!🙏
Thank you for your suggestion
. no