LEXIN Moto FT4, FT4 Pro, and B4FM helmet install instructions

Поділитися
Вставка
  • Опубліковано 3 лис 2024
  • This video is an instructional installation video for the Lexin FT4, FT4 Pro, B4FM and upcoming GT8 helmet intercom audio kit helmet installation. Each unit's Audio kit will install the same, with the only notable difference being the main unit the audio jack will plug into.
    For Technical support, warranty information or claims email info@lexinmotorcycle.com or call 800-380-8248 Monday through Friday 7am-6pm PST.

КОМЕНТАРІ • 39

  • @terrykennedy3081
    @terrykennedy3081 4 роки тому +5

    I really liked the instruction video as it helps to not make mistakes during installation. Great system and a lot less expensive than those competitors when you need a good system without the bells and whistles that run the cost up. Thank you Lexin!

    • @LEXINMOTO
      @LEXINMOTO  4 роки тому

      Thanks Cody!

    • @JohnSmith-uy7sv
      @JohnSmith-uy7sv Рік тому

      @@LEXINMOTO who's Cody? His name is terry. duh. 🙄 I have a dumb phone flip phone with blue tooth and wifi. Will it still work to make and answer calls? Can't find any videos on how that works or what you have to say or what buttons to push.

  • @davidevans7469
    @davidevans7469 3 роки тому +1

    I have just fitted my new FT4 PRO to my O'Neal helmet to my surprise it all fitted well, simples. I watched this video to double check everything and all is good so far. Just about to power up the FT4 PRO pair it and test it. Great so far. Good value for money 💰 👏 👌 👍 😉

  • @185kph
    @185kph Рік тому

    Thank you Ana.
    I have just installed mine today successfully, thanks to your video. 👍

  • @mikeyg6631
    @mikeyg6631 3 роки тому +1

    Thanks for using a bell for the installation. I have the same one!!

  • @rogerthedodger5788
    @rogerthedodger5788 3 роки тому +1

    Bought this and its brilliant. Connected to sat nav and all perfect. Now my mate bought one and paired the two no issue BUT now I cannot hear the sat nav. What have I done wrong?

  • @danwindsor9032
    @danwindsor9032 2 роки тому

    The unit clicks into the mounting bracket, but I can push it out by hand, without the use of the plastic release tool. Is this defective or still ok?

  • @Homes4CarGuys
    @Homes4CarGuys 2 роки тому

    Best install video … thanks

  • @RafaelMarcosAderaldo
    @RafaelMarcosAderaldo 3 роки тому

    Which product has better sound and is louder lexin g16 or ft4 pro?

  • @mello84
    @mello84 3 роки тому +1

    I bought the set with two lexin B4FM, but only one device is connecting to the cell phone, and the other doesn't connect to the cell phone and I can't pair with the other device. Has anyone had this problem?

  • @kotsiosG7delije
    @kotsiosG7delije 4 роки тому +1

    Hello guys, nice video. I bought the Lexin B4Fm last year but due to some issues I had I didn't use them yet. I am just trying to figure now a way to connect my gopro8 black to the device so information from my Lexin can be recorded on the go pro. Do you have any recommendations?

    • @ridin_low193
      @ridin_low193 4 роки тому +2

      Ooo that’s a good one

    • @LEXINMOTO
      @LEXINMOTO  4 роки тому +1

      @@ridin_low193 There are several apps available to do this, we've recently used an App called "Mic"

  • @damer950
    @damer950 4 роки тому

    One complaint.. I have b4fm and the mic for modular helmet is set for left side only... But my helmet Nolan N100-5 has prepared "hole" only for left side mic... Mic should by universal because it failed me already due to twisting in front of my mouth

  • @samdoesit9542
    @samdoesit9542 2 роки тому

    Does this pair with sena?

  • @ruhaanjuneja1630
    @ruhaanjuneja1630 2 роки тому

    How to you take the unit off the bracket?

  • @BorderPaps
    @BorderPaps 2 роки тому

    Mine won’t grip my helmet when tightened. I have an HJC IS-16.

  • @TheClosetBuilder
    @TheClosetBuilder 3 роки тому

    What’s the difference between all of them?

  • @JohnSmith-uy7sv
    @JohnSmith-uy7sv Рік тому

    you had the lexin b4 fm on the table but you did not use it. I need to know cloning to my dumb phone flip phone with wifi bluetooth. I guess I have to pull out all of my stuffing liners to run everything properly. I should get my lexin b4fm next week. It's not to talk to anyone. It's to make and receive calls.

    • @LEXINMOTO
      @LEXINMOTO  Рік тому +1

      The video at this link should walk you though everything you need to know about the B4FM.
      ua-cam.com/video/KV31TagxW-s/v-deo.html
      @ 3:39 is how to pair the BF4M to a Bluetooth enabled phone. if this doesn't resolve your issues please reach out to us at info@lexinmotorcycle.com

    • @JohnSmith-uy7sv
      @JohnSmith-uy7sv Рік тому

      @@LEXINMOTO Or I'll just save this link. I've already turned on the wifi and bluetooth on my alcatel goflip 4 dumb phone flip phone. 🙂 thanks so much.

    • @JohnSmith-uy7sv
      @JohnSmith-uy7sv Рік тому

      @@LEXINMOTO Oh, I watched this video twice before. Delete it and let someone else do it properly. He absolutely makes no sense at all and just muddles his way through the explanation. Everyone cannot do a proper training class video. What a nightmare.

  • @aleksandr8784
    @aleksandr8784 3 роки тому

    Where can I download instructions for the pro version of b4fm?

  • @mikemauger3660
    @mikemauger3660 2 роки тому

    Has anyone ever added this system to an LS2 Subverter EVO? Step 1, installing the metal clip between the liner and casing, seems to be impossible on this helmet.

  • @kartdodger
    @kartdodger 4 роки тому +1

    Why is the audio-only playing through the ear

  • @OifelOifel
    @OifelOifel 3 роки тому

    And what about placing the mic on a foldable helmet? where do I place the mic?

    • @LEXINMOTO
      @LEXINMOTO  3 роки тому

      Use the boom mic, place on the non-folding part between the shell and liner.

  • @erichoutman8803
    @erichoutman8803 4 роки тому +3

    Aggh my right ear left the room

  • @paparazzizi
    @paparazzizi 4 роки тому +1

    Pity. black articles on a black background ... you see nothing...

  • @LetsDark
    @LetsDark 2 роки тому +1

    This instruction is just bad. You see nothing. Where do I place the speaker, what if the helmet has deeper compartments and you would like to use on of the pads? What if clamp plate doesn't get deep enough? None of my installation questions where answered here.

  • @kimojon9665
    @kimojon9665 3 роки тому +1

    I don't get the 50 year old dude on the tricycle at the end, looks very lame if you're promoting a product.

  • @SolarRepublic
    @SolarRepublic 4 роки тому

    too much expensive

    • @fsas190
      @fsas190 4 роки тому +1

      How so? Sena units are like $300

  • @codo3001
    @codo3001 2 роки тому +2

    Hey anna, your sooo cute. Please share your insta.