www.amainhobbies.com/treal-hobby-axial-scx10-iii-capra-hardened-steel-driveshafts-2-91125mm-tlhtscx10-iii-42/p1521669?gclid=CjwKCAiA75itBhA6EiwAkho9ewFvI75t3cXIZFbUi17t3IU-r7eFn9h2YHfsyHQwO0jIZKAvalF-xhoCNtkQAvD_BwE Thank you 🔥☠️🔥
It's a little loud...the spur & pinion are meshed fine, perhaps it's just a little noisy..maybe ill add a little grease inside the tranny/gears. 🔥☠️🔥👍 Thank you for your feedback !!
Inserts in the tires very hard. Because not grips. Need soft inserts. You also lack smooth running. Change the electronics, motor and regulator. Put a brushless motor and regulator Bamba, or Hobbywing combo V2.
cool vid, my friend! big like! 👍👍👍
Looks great. What drive shafts ya get ?
www.amainhobbies.com/treal-hobby-axial-scx10-iii-capra-hardened-steel-driveshafts-2-91125mm-tlhtscx10-iii-42/p1521669?gclid=CjwKCAiA75itBhA6EiwAkho9ewFvI75t3cXIZFbUi17t3IU-r7eFn9h2YHfsyHQwO0jIZKAvalF-xhoCNtkQAvD_BwE
Thank you 🔥☠️🔥
I suggest you add some spacers on the swaybar rod to keep it centered. 👍🏼
I have one on my early bronco and it helps.
Thank you for the suggestion, I'll try that out 🤙
@SoCalCrawlers I put mine between the frame rails and the arms. 🤘🏻
Better hardware stores have stuff that works so they are easy to find
sounds like pinion and spur great
It's a little loud...the spur & pinion are meshed fine, perhaps it's just a little noisy..maybe ill add a little grease inside the tranny/gears. 🔥☠️🔥👍 Thank you for your feedback !!
Inserts in the tires very hard. Because not grips. Need soft inserts.
You also lack smooth running. Change the electronics, motor and regulator. Put a brushless motor and regulator Bamba, or Hobbywing combo V2.
Stock foams, Hobbywing SE 1800kv, I may need to tune the esc/motor. Thank you for your feedback 🔥☠️🔥👍