The Duramax Still Has A LOT of Problems!
Вставка
- Опубліковано 7 вер 2024
- HUGE THANKS TO:
Hummel's Auto Body - Mifflinburg, Pa
HT Performance - Middleburg, Pa
Rough Country
The Seat Shop - Use Code "TLR10" for 10% off
Kodiak Truck
Joe's Auto Parts - Sunbury, Pa
Mictuning
Merchandise: teespring.com/...
Follow me on Instagram @TopLineRacer
Email me: TopLineRacer@gmail.com
Check your frame to cab ground straps, I don't have much experience with durmaxs but it's worth a try.
It’s so amazing to see this truck look that pretty after it was run into the ground! I love seeing your stuff as much as I like seeing Cody at whistlin diesel wreck his stuff lol! Keep up the good work, love your rebuilds!
You guys are ok brother I understand you aren't able to do youtube fulltime so of course you might be behind. But look at those 2 awesome trucks you to cranked out by yourselves. That is amazing work guys. So dont let them cowboy keyboards get you mad brother just keep doing your guys work. Love the content brothers, I am Eric Houser from Larned kansas. Besafe guys
If only I lived closer to u guys. I’d wire the mirrors up for you guys
Sad face love the channel you do great the progress is unbelievable
Its easy to get the turn signals working on your tow mirrors. Just have to run 2 wires to you fuse box.
Good job. We all learn staff. By trying. Be the before. I did a rebuild on a obs 88 k2500. I replaced the cab and wiring harness.
I was waiting for the hammer to slip and break the window rewire the truck maybe it'll work
My Lly did the same thing. It's the ribbon ground on ur firewall.
Had the exact same problem with my truck. Found out it was the PAC audio box for the radio not communicating with the can bus.
First lower the air to 1 then shut the air off. Then turn the truck off and jump in the cab and shut the doors. turn it back on, put it to 1 and forward vents - and listen for the blend doors it’s a sort of humming click noise. Don’t leave it on max air every time it starts. You might need a new ac control unit but starting with hearing it the blend doors will at least tell u if it’s hvac related or electrical
Hey @Topline racer I love that truck So much bud and you did a awesome job repairing it stuff its awesome bro and love it ❤
Please put the exhaust back on
Great progress gents! Love the work yall have done. Im always watching for videos on this duramax! Can't wait to see whats next
Check the grouns!!!! On the dash on each corner
You should probably rebuild the front suspension if you did already you made the right choice
Truck master has a video on wiring the turn signals on the tow mirrors.
If you ultimately don't like that hood I'd love to see a 01-02 Chev HD hood on it! Awesome what you've done with it from how you got it though!
The hood needs to be over extended. It’s hard to explain but forcing it open too far will make it sit lower when closed. You will probably have to remove the springs to do it
The truck looks great awesome Job
Dude I had this exact same problem not too long ago. Ran a ground from my engine block to my frame and everything was fixed
DUDE!!! Where ya been!!! I missed ya!!! Great video as always brother!!
Well at least y’all proved one thing. That you can make shit shine 😂
Do you have the other Duramaxs?
Since so many things domt work i would think bcm also. I would get a pinout of that bcm and check all your grounds and power pins. Ive always been nice but between lance and you climbing up the tire, i have to ask. How does your women feel about you 2 wearing their pants. Haha
Youre a douche for asking theast question. Although your woman must wear the pants in the relationship 😆🤣😂😂
I wonder whos putting the timbs on tonight in your relationship
@@k.a.d.msrt8326 i assume you must rock the skinny jeans also.. how much do you know about relationships???
Such a good looking truck
dang, sweet ride
Your ecm is how the engine runs, ur bcm is all the cab and out side lights. If ur running a mismatch of replacement cab wiring with the old truck bcm ur gonna have issues
Love your videos can I please get this paint code would love to paint my truck that color
Paint looks really good. Good luck on the rest lol.
Can’t remember but I think the id on the bcm has to match the original gm is very picky
You guys should build a square body suburban that would be sick
I have one on my channel
this truck looks awesome I'm hoping you never let whistling diesel AKA CODY touch it again what's the updates on the truck
TLR! Bro that is a top of the line job! luv that truck, Nicely done Spencer! Luv&Peace & hi to the family ✌🍻
I love the truck
You need some Kryptonite Traction bars!
Is the exhaust on yet?
Put two spacers on the top bolt of your Mirrors so that level out
I would of just put some washers in-between the fender and the hinge, and if our need more elongate the holes for the other bolts?
I’d cut half an inch out of the hinges and weld them back together lol. But I’m a shade tree body guy/mechanic. I don’t build anything for show
@@Beandiptheredneck I can relate, i just know that they haven't done much welding on the channel so I suggested the next best thing
What happened to the s-10 blazer?
Unbolt the hood then adjust it from the hinges. No bending required...
You have 3 nuts on the bottom of the hood that the bracket thread to. Loosing those, and test fit slowly. Can't help you with the power issue...I am still trying to finish my Silverado to Sierra conversion and I just have to finish the bumper and body work...
Duramax look nice i like nice job
What year is that truck
It could be the grounds.
I love that truck .... keep up the great videos guys
You guys need a tractor, even a small one with a frontend loader would make it so much easier to move stuff around.
What kind of lift you have and brand
do you still have the rolled cab
its in the pond to the right of his house
@@brenontech he took it out
Nice Cadillac BTW
The pink one
The duramax is clean
Can I have the old exhaust
Great video ill be waiting for the next!!
The exhaust will really make it look beefy
Put some leds in that thing😂
You should Watch truck master he will show you how to get your mirrors lined Straight am I right 👇🏻
I have never clicked on something so fast
I thought it was just me!!! lol
Same
Man she looking fine girl
Ecu starts the truck
Those aftermarket hoods are stamped from cheaply made die's only way to fix it to test fit before paint an beat the hell out that hood because it does not have a true shape
Second
Fix mirrors they are tipping way up....
First
you shim ythem up
If you ever want to sell the truck I got 10 K😂
The person that bought the truck has a lot of problems.
Who let these guys use tools.
No offense but this truck is a chunk of junk.
So what you are saying is, this era of Chevy SUCKS, and Ford is superior during that time, right?
Hahahaha, I would never say that.
20k hackjob
It’s a Chevy that why you have problems
First
Nobody cares lol
I was second lol
@@iankoehler1712 does anybody care. Oh wait let me answer, no.
@@jadennorman298 when?
@@jadennorman298 eat a satchel of richards