Thanks for making a real video again. You were a staple in my drunken watch list. Your short videos are… not good. Keep making long ones, and you got a lifelong watcher.
STDs are insidious. Give a man an itchy rash and o'course he's gonna scratch it! And if you wanna scratch two itches at the same time, trying for another STD will get you just the right amount of friction to get the job done!
"instead of shooting sparks at your eyeballs, you can shoot 'em at your crotch" Eh, that's ok, I'm married. I actually get some use out of my eyeballs.
@@tombeauchamp806 it's just kind of scary seeing someone like him gone for so long. His information and instruction is dead on accurate but as humor is virtually irreplaceable. Come on Tony, e jump back in and at least tell us how you're doing.
yep, getting worried about him and his, the loss of his father in law musta been one hell of a blow, i can relate, my father's dads passing took a huge toll on the family and we were never really whole again as a family, there was a giant Robert shaped hole where he was...still is for that matter..41 years 1 month and 3 weeks later. god keep you ToT. take your time brother we will be here.
Give them a 50 yuan raise you say? The only recompense they should receive is the pride that comes from knowing that they contributed to the continuing prosperity of the company.
Two blokes go mountain hiking. One takes a pizz and gets bit by a venomous snek right in the manhood. Doubled in pain he shouts to his compatriot to run to the medical tent they had passed a mile earlier to get help. As the friend makes it to said tent, he manages to request the help he needs for his friend in betwixt the gasps of air from the run. Unfortunately the anti venom is miles away and the medical team concludes the only way to stop death knocking is to suck the venom out. As his buddy returns, the man is relieved and asks, what did they say? They said you're going to die.
Man I ran across your videos years ago I used to be a patron I got strung out on drugs and lost everything but I'm clean now and I will soon be able to become a patron again what you do is amazing being completely impartial for one but man the knowledge you have about mechanical contrivances chemistry dancing pixies etc. I wish one day I could be fortunate enough to meet you you clearly have retained more in half a lifetime than 3 generations learn
11:00 re the chintzy bearing, that actually looks like a genius idea. Nylon is self lubricating, but GF Nylon I suspect is a bit abrasive.That thin little shim of metal would prevent the GF vibrating against the other GF part.
Yes this is a great tool. I found a tiny saw blade and use it to make quick drywall cuts. You can also convert it into a “finger sander” for touching welds.
Does it work well for things like holes for electrical boxes/outlets? I only do this occasionally so definitely an amateur, not sure how you'd get a nice clean edge as opposed to some rounding on the corners?
The plastic guard comes off - it nests over the metal one and is meant just to capture tile and concrete dust and the like (OSHA). Overall I’ve found it to be a pretty decent tool with realistic expectations. Use it to cut up the skeletons on my CNC plasma and it’s really handy for that - about to make a hanger for it to hang right on the table frame. Also used it with the guard/foot for guided cuts in sheet metal (like you would on plywood with a circ saw) and that worked pretty well also. I’d bet you might be able to adjust the cut depth also for when you just want to score the metal for bending maybe?
Love using this little guy to cut through steel tracking and studs when I'm doing rough in plumbing, and there's only one working outlet 200' feet away to go between multiple contractors on site. I started using one of those Lenox metal max diamond cut off wheels for it though. It burns through every brand of 3" abrasive wheel I've tried way too fast. The Milwaukee's seem to last the longest but at $18 for a 3 pack that's a hard pass. Love these vijeos. Keep em comin!
I have the Bosch. Very handy tool. I will try the rescue blade but it is slightly undersize for the Bosch, it uses 10 mm metric so I will need to ream the hole. That's been putting me off.
I've used this tool for a few years doing access control and low volt work. The small size and depth of cut is perfect for cutting an electric strike into a door frame (hollow metal or wood). The blades are tough to find, however Harbor freight has the perfect size abrasive cut off wheels.
Same lol - he was right in that no one uses the plastic bit….. but the little metal guard underneath is what makes this little saw such a great tool for quick small precise cuts.
How it is to cut sheet metal straight? I put one in my Amazon cart now. But one of the reviews say the batteries run out very quickly making this worthless to work with. ?
@@danl.4743 It'll cut steel pretty well, I use this tool in Automotive quite frequently. Actually had to cut through an axle the other day and this thing did it pretty well considering its size. Definitely want a 6ah battery for heavy use though
Glad to hear you again! A cordless bandsaw is so good at cutting EMT and other small parts I don’t know how useful this would be. At least it’s not extra chintzy
I'd think it's more for light sheet metal work, such as a tin knocker would do when cutting square openings in HVAC ducts. Or with a diamond wheel, tile installers could make trim cuts on pieces.
Bosch has a very similar tiny saw, but more in the shape of an angle grinder with the cover. Bike thieve’s best friend we used to nickname it while we sold it. due to its pocket-friendly size and metal cutting ability.
@Hot Piece Of Kek yep, and you know what the anti bike thief's best friend is? 2 Mags +1 of 10 mm, and they can go faster than you can pedal. Problem solved.
Very glad to see you back on UA-cam hands down the best show on the web and we’re missed ….. thank you for the great video hope to see more soon best wishes to you and the family
Good to see you back in business! I was jonesing so hard for my AvE fix that I went and bought a bunch of my own tools to take apart. Temporarily fixed the urge, but my wife wants to know why we have to move out of the house and into a cardboard box.
Here we go, straight from the Google gods! Chintzy; "Something that's chintzy is tacky or cheap. A badly made pair of pants is chintzy, and a terribly acted, melodramatic movie is too. Things made of inferior materials are chintzy: "I like the neighborhood, but the house is so badly built, with really chintzy kitchen cabinets and closet doors." Another way to use this adjective is to mean "stingy," or "ungenerous." You might complain about your chintzy boss at work, who's known for giving workers five cent raises and not paying for overtime. Chintzy comes from the cotton fabric known as chintz, from the ordinariness of this common material."
In the uplholstery trade, it's a starch(or other process) glazed cotton fabric. It's glossy and fancy looking but cheep. Well was cheep until it became a fashion and now out off fasion. It is acually nice stuff. I would prefer taffata silk but would be happy with chintz.
If you have a lathe, turn yourself a new arbor for the full sized cutoff wheels, then after they are to small for the full sized grinder they are the perfect size for this tool.
Oh my God what a wonderful thing it is to be able to watch another boltr. Wish they where more often but I will take what I can get when I can get it. Thanks ave
"instead of shooting sparks at your eyeballs, you can shoot them at your crotch". ain't that the truth. Didn't know they allowed electric full size chainsaws in Canada.
My uncle is in the under the table barn renovations kind of business, the electric chainsaw is his signature tool. Trice as fast as cutting of limbs as any jigsaw!
How it is to cut sheet metal straight? I put one in my Amazon cart now. But one of the reviews say the batteries run out very quickly making this worthless to work with.
@@danl.4743 If you want to cut sheet 18 gauge plus it'll constantly stall out and burn through batteries very quickly(2ah might cut 18 inches). It's way overpriced for what it is, but other than Ryobi there's nothing cordless on the market that is the same (the Ryobi is stronger). You do get used to how weak it is by only using it on small occasional cuts.
Chintzy actually is in reference to a particular gaudy fabric.. the earliest definition actually meant "covered with chintz", which was considered to be ghetto fabulous back in the day.
You sound like a teacher that I'd actually pay attention to when I was in trade school. You should do instructionals on this channel. I've learned so many terms about the plastic on my drill but I don't know what they mean! Love the content man.
1.5k views on 35 seconds Dang people must be "including myself" waiting in anticipation for a new video drop. Thank you uncle bumblefuck for giving a shout out for the Big Clive channel. A complete AvE for electronicals.
Just so happens I was wearing my Empire of Dirt t-shart on the way to night shift, and up pops a video from Uncle Bumble. Glad to see you back, hope all is well.
That is one of my favorite tools ive ever purchased! Amazon carries all the replacement wheels you need bc they are semi hard to find at the Homer Depot
I’m sure someone has said it but the shroud comes off. Have used one of these for a bit. Not to bad for stupid activities. Awesome to see it opened. Thanks neighbor.
Thanks for making a real video again. You were a staple in my drunken watch list. Your short videos are… not good. Keep making long ones, and you got a lifelong watcher.
Well fuck, they can't all be good. Whattaya think I'm This Old Tony?!
Pin of shame. Lol
@@arduinoversusevil2025 Aye, fair enough, but gotta give people what they want!1oneone
@@arduinoversusevil2025 Speaking of This Old Tony....where the hell has he been?!
@@arduinoversusevil2025 everything you make is gold to me, please upload more!
A perfect gift for children. Both a useful toy and violent safety lesson.
Under no circumstances should you get it for Ralfy. That would make for a gory malt review.
It's how we learn. 😃☝️💢🤕✊
And Evolve. Sometimes a piece of DNA needs to be removed from the gene pool.
I can hardly wait for this tool's safety video version of "Blood on the Bandsaw"!
@@GlennHamblin goddamit u beat me to it
That tingly feeling when a BOLTR comes along, pairs well with the burning sensation
They have ointment for that, believe it's molybdenum disulfide? Oh, and a cold beer for the burning sensation.
Ahhh BOLTR. I remember the days. The green thumbnail alone brings that warm tingly feeling.
.....quick...get tested and get some antibiotics....usually green discharge is a warning sign...
STDs are insidious. Give a man an itchy rash and o'course he's gonna scratch it! And if you wanna scratch two itches at the same time, trying for another STD will get you just the right amount of friction to get the job done!
The pieces for my plans for a discount circumcision clinic are falling into place. My services are going to be cheap (but will take tips).
"Must be this tall to ride"
Just the tip
Oh no
Eric L
And only for a minute
Just a little off the top please.
You can't explain puns to kleptomaniacs. They're always taking things literally.
Dude yea
The inconsistency in plastic colors must be to generalize your conditioning: soon any tool in any shade of red makes you think of Milwaukee.
Red is a good color in China. They love any shade of red.
Milwaukee has shifted production from just china to around the world like vietnam and mexico so they likely working with different plastic suppliers
Really it's to match your blood when you cut yourself open with the new tool.
Part of the red difference has to do with the texture on the tool vs polished on the battery.
genius
Bloody hell! I haven't seen that mini-chainsaw for a while. She sure has grown up.
It clearly is a boy ;)
Surely we need a revisit to that saw now that it has grown up.
@@ToTheGAMES I mean... who’s to say nowadays?
Its a real boy now!
@@johnpenguin9188 ¯\_(ツ)_/¯
World's smallest circular saw opened without the world's smallest chainsaw? Hearsay!
Hearsay heresy at its finest.
Its ok. I know, words is hard.
Where’s the Bosch when you need it? I thought he had one.
You have to see it in your own eyes to believe.
A 2 day old comment on a 4 hour old video? 🤔
"instead of shooting sparks at your eyeballs, you can shoot 'em at your crotch"
Eh, that's ok, I'm married. I actually get some use out of my eyeballs.
Yea, I’d prefer my eyes, that way I don’t have to look at my wife any more.
Lmfao best comment yet
Hahahaha
Wait, table saws have guards? I thought that was just transit protection
it guards the blade from the abrasive box for perfect member cutting right out da box
The scariest part was when you started opening the box by cutting the smellotape like any average joe would.
I couldn’t make myself watch that part I had to fast forward to the chainsaw opening.
Its reversible because you can cut in one direction and joint two pieces in the other
thats quite witty
You don't have to read the manual if you shred it before taking out the equipment! Smart!
One handed use, defo aimed at the elechickens with their gucci thongs
Brilliant, now all we need is a 'this old Tony' vidayo and be like the good old days again
I'm very surprised he's been gone so long. Hope he's doing well.
@@tombeauchamp806 it's just kind of scary seeing someone like him gone for so long. His information and instruction is dead on accurate but as humor is virtually irreplaceable.
Come on Tony, e jump back in and at least tell us how you're doing.
yep, getting worried about him and his, the loss of his father in law musta been one hell of a blow, i can relate, my father's dads passing took a huge toll on the family and we were never really whole again as a family, there was a giant Robert shaped hole where he was...still is for that matter..41 years 1 month and 3 weeks later.
god keep you ToT. take your time brother we will be here.
Give them a 50 yuan raise you say?
The only recompense they should receive is the pride that comes from knowing that they contributed to the continuing prosperity of the company.
Wow, my boss is a fan, apparently.
“This thing’s workin proper, we can fix that”
Love seeing a new BOLTR or for that matter any new AvE video.
"It's all on the same bird!".
And that bird is a necrotic Vulture.
Two blokes go mountain hiking. One takes a pizz and gets bit by a venomous snek right in the manhood. Doubled in pain he shouts to his compatriot to run to the medical tent they had passed a mile earlier to get help.
As the friend makes it to said tent, he manages to request the help he needs for his friend in betwixt the gasps of air from the run. Unfortunately the anti venom is miles away and the medical team concludes the only way to stop death knocking is to suck the venom out.
As his buddy returns, the man is relieved and asks, what did they say?
They said you're going to die.
An old Lone Ranger and Tonto joke. Still good tho…
This joke was found in the Egyptian tomb.
😉🗻
Man I ran across your videos years ago I used to be a patron I got strung out on drugs and lost everything but I'm clean now and I will soon be able to become a patron again what you do is amazing being completely impartial for one but man the knowledge you have about mechanical contrivances chemistry dancing pixies etc. I wish one day I could be fortunate enough to meet you you clearly have retained more in half a lifetime than 3 generations learn
As an erstwhile doormaker and a general contractor I can assure you that table saw guards are only there for the lawyers.
I’ve missed these BOLTR’s. My favourite tool reviews
Good to see you back again. Guess you needed a period on your own healing bench after the recent excitement.
11:00 re the chintzy bearing, that actually looks like a genius idea. Nylon is self lubricating, but GF Nylon I suspect is a bit abrasive.That thin little shim of metal would prevent the GF vibrating against the other GF part.
A fkn BOLTR!! Man I've missed these. Thank you Canada Clause. After this week, I needed this.
Amazing how entertaining AvE still is after years of videos. Always a pleasure. Would love to see him open up an analog synthesizer.
A zillion potentiometers, transistors, some resistors, maybe a few inductors.
Yes this is a great tool. I found a tiny saw blade and use it to make quick drywall cuts.
You can also convert it into a “finger sander” for touching welds.
Does it work well for things like holes for electrical boxes/outlets? I only do this occasionally so definitely an amateur, not sure how you'd get a nice clean edge as opposed to some rounding on the corners?
@@awaywedrove8861your best bet would be an oscillator saw, better control and straight edges
Someone on the internets created an adaptorb to turn those into a cordless dynafile! Bloody brilliant for post weld clean up on sanitary beer tubing!
If milwaukee sells a version like that I'll buy one for sure.
Good advice! I used the gargler and found a conversione kit at the usual scumbags!
Cryobi does a dynafile that ain't half bad, my go to for sheet metal cleanup and holes that are too small for a grinder
@@waste0ftime1 seeing ave vocabulary from people that arent ave is so cringe
@@samo4648 Tell that to the others "AvE-Cop". Just trying to have a good time 😎
The plastic guard comes off - it nests over the metal one and is meant just to capture tile and concrete dust and the like (OSHA). Overall I’ve found it to be a pretty decent tool with realistic expectations. Use it to cut up the skeletons on my CNC plasma and it’s really handy for that - about to make a hanger for it to hang right on the table frame. Also used it with the guard/foot for guided cuts in sheet metal (like you would on plywood with a circ saw) and that worked pretty well also. I’d bet you might be able to adjust the cut depth also for when you just want to score the metal for bending maybe?
I love your channel :)
AvE and RC Sparks. Two of my favorite Canukistanians!
Love using this little guy to cut through steel tracking and studs when I'm doing rough in plumbing, and there's only one working outlet 200' feet away to go between multiple contractors on site. I started using one of those Lenox metal max diamond cut off wheels for it though. It burns through every brand of 3" abrasive wheel I've tried way too fast. The Milwaukee's seem to last the longest but at $18 for a 3 pack that's a hard pass. Love these vijeos. Keep em comin!
I have the Bosch. Very handy tool. I will try the rescue blade but it is slightly undersize for the Bosch, it uses 10 mm metric so I will need to ream the hole. That's been putting me off.
I've used this tool for a few years doing access control and low volt work. The small size and depth of cut is perfect for cutting an electric strike into a door frame (hollow metal or wood). The blades are tough to find, however Harbor freight has the perfect size abrasive cut off wheels.
Glad to see you back at the healing bench. Thanks for all the boltr. Stay safe and frosty.
The guards separate. Push the big red button. Kinda like the cover on the flexvolt battery...
I was disappointed that he didn't unsnap that part first
Same lol - he was right in that no one uses the plastic bit….. but the little metal guard underneath is what makes this little saw such a great tool for quick small precise cuts.
Welcome back you magnificent bastard, we've missed you.
Man I new something missing in my life! Thanks for blessing us with a Boltr! These never get old for me!
A good old fashioned BOLTR! Been a while. Good to see you again Uncle B.
That tool cuts tile sooo freakin nice with the diamond blade. I use that thing all the time especially when doing shower valves. Great tool
Works great on plaster walls attached to a HEPA vacuum too!
How it is to cut sheet metal straight? I put one in my Amazon cart now. But one of the reviews say the batteries run out very quickly making this worthless to work with. ?
That's every m12 tool. Just gotta have 4 batteries and 2 chargers on hand.
@@danl.4743 It'll cut steel pretty well, I use this tool in Automotive quite frequently. Actually had to cut through an axle the other day and this thing did it pretty well considering its size. Definitely want a 6ah battery for heavy use though
I just feel extatic when i hear "Today's a treat especial..." 😅
I missed these so much so good to see a
New one in my feed to brighten the day.
Glad to hear you again! A cordless bandsaw is so good at cutting EMT and other small parts I don’t know how useful this would be. At least it’s not extra chintzy
I'd think it's more for light sheet metal work, such as a tin knocker would do when cutting square openings in HVAC ducts. Or with a diamond wheel, tile installers could make trim cuts on pieces.
I use a bandsaw. Tried one of these and returned if because of all the hot sparks. Frowned upon on some jobsites.
I'm ashamed to admit that when he first said EMT I thought "dang I don't think that would work as a field surgery tool" 🤦♂️
@@awaywedrove8861 EMT is electrical metallic tubing also called conduit
@@MattLitkeRacing ha yeah i put that together after my initial shock, no pun intended
Bosch has a very similar tiny saw, but more in the shape of an angle grinder with the cover. Bike thieve’s best friend we used to nickname it while we sold it. due to its pocket-friendly size and metal cutting ability.
@Hot Piece Of Kek yep, and you know what the anti bike thief's best friend is? 2 Mags +1 of 10 mm, and they can go faster than you can pedal. Problem solved.
@@deadaccount6135 You probably ride a lifted straight piped pickup with a thin blue line punisher sticker.
Ave is still alive!! This is my addiction on UA-cam.
Been soooo long since a good BOLTR. Welcome back!
Very glad to see you back on UA-cam hands down the best show on the web and we’re missed ….. thank you for the great video hope to see more soon best wishes to you and the family
Good to see you back in business! I was jonesing so hard for my AvE fix that I went and bought a bunch of my own tools to take apart. Temporarily fixed the urge, but my wife wants to know why we have to move out of the house and into a cardboard box.
Raise your hand if you wish this guy was the officiant at your wedding.
Or be in the running to be a leader of this country! Although I think we would need to see more than hands...
'lerft wing, right wing, IT'S ALL THE SAME BIRD!!" --AvE. I'm stealing this.
Been a while, thanks for uploading! always enjoy em
I stick that sheet on my wall like it's a Pokémon chart and I try to collect them all.
Hey!! It's my favorite stripper back in action!
We got this in our shop weeks ago, became one of best used tools around. Great stuff..
Oh great glory above finally another BOLTR!!! THANK YOU SO MUCH! MUCH LOVE
Here we go, straight from the Google gods!
Chintzy;
"Something that's chintzy is tacky or cheap. A badly made pair of pants is chintzy, and a terribly acted, melodramatic movie is too.
Things made of inferior materials are chintzy: "I like the neighborhood, but the house is so badly built, with really chintzy kitchen cabinets and closet doors." Another way to use this adjective is to mean "stingy," or "ungenerous." You might complain about your chintzy boss at work, who's known for giving workers five cent raises and not paying for overtime. Chintzy comes from the cotton fabric known as chintz, from the ordinariness of this common material."
Blimey i thought it was spelled "chinsey"
Yay! I'm not the only man on this planet with a dictionary and the know how of how to open it and the want to understand
Chintzy is of Yiddish origin, and that explains why someone cried
In the uplholstery trade, it's a starch(or other process) glazed cotton fabric. It's glossy and fancy looking but cheep. Well was cheep until it became a fashion and now out off fasion. It is acually nice stuff. I would prefer taffata silk but would be happy with chintz.
@@Drowronin while it certainly sounds like a Yiddish word, it's origins are actually in Sanskrit by way of Hindi.
If you have a lathe, turn yourself a new arbor for the full sized cutoff wheels, then after they are to small for the full sized grinder they are the perfect size for this tool.
I use a lot of small disc's for my mini makita c/ saw
I have missed these vids dearly!! Please keep em comin
Freakin glad to see BOLTR's are back! Keep 'em coming, coliss !!
Been waiting on a new boltr. Love to see it brother.
So glad you’re still alive!!
Welcome back BOLTR, More knowledge and mirth for all. Cheers.
Oh my God what a wonderful thing it is to be able to watch another boltr. Wish they where more often but I will take what I can get when I can get it. Thanks ave
"instead of shooting sparks at your eyeballs, you can shoot them at your crotch". ain't that the truth.
Didn't know they allowed electric full size chainsaws in Canada.
If you can have a chainsaw with a 125cc engine and a 4 food bar, why not electric?
My uncle is in the under the table barn renovations kind of business, the electric chainsaw is his signature tool. Trice as fast as cutting of limbs as any jigsaw!
REAL glad to see you back. Hope you’re all well and staying healthy
With love, from Illinois❤️
Now that was a great end to a work day. Ice cold beer, and a new ave video. Cheers man
I'm so glad you didn't forget how to do a boltr I missed them great learnings
I have one.... It's the gutless wonder.
How it is to cut sheet metal straight? I put one in my Amazon cart now. But one of the reviews say the batteries run out very quickly making this worthless to work with.
Same, gutless but damn useful!
Small world. You need to help him get a new dog.
@@danl.4743 If you want to cut sheet 18 gauge plus it'll constantly stall out and burn through batteries very quickly(2ah might cut 18 inches). It's way overpriced for what it is, but other than Ryobi there's nothing cordless on the market that is the same (the Ryobi is stronger). You do get used to how weak it is by only using it on small occasional cuts.
@@sixtyfiveford give it a 6ah battery then!
when you're of the sinister-handed persuasion, it's like a stranger is holding it.
back to your brilliance. I've missed these
Meanwhile at a Home Derpot return desk... "What happened to this box?!" "Oh, sorry, the beaver I used to open the box is a bit dull."
Chintzy actually is in reference to a particular gaudy fabric.. the earliest definition actually meant "covered with chintz", which was considered to be ghetto fabulous back in the day.
You can’t say ghetto! That’s…oh who am I kidding? Im really not offended. Lol.
A BOLTR video was exactly what I needed today. Gotta love getting that notification!
You sound like a teacher that I'd actually pay attention to when I was in trade school. You should do instructionals on this channel. I've learned so many terms about the plastic on my drill but I don't know what they mean! Love the content man.
Damn that prefamulated amulite!
Man it's been a while since we've enjoyed a BOLTR. I'm looking forward to seeing the emperor of the empire of dirt ripping this apart.
Missed these. Glad you’re back
Uncle B so glad to hear from you again and thanks for the stickers.
1.5k views on 35 seconds
Dang people must be "including myself" waiting in anticipation for a new video drop.
Thank you uncle bumblefuck for giving a shout out for the Big Clive channel. A complete AvE for electronicals.
BTH he's more Photonic (and it's great to see him back).
BC's far too polite to pop stuff and never loses his temper.
The videos are available for Patrion members earlier.
9:34 Someone complaining about you using "Chintzy"? Wait until you start using synonyms for "being stingy"!
I'm surprized that's the word they had issues with and not Chinesium.
That circular saw guard is also quik detach from the inner metal guard, makes it better for cutting metal when detached.
Been needing a good Boltr vid
7:31 hahahahaha j'ai trouvé ça drôle en calice, mon Christophe!
Good to see you back at the bench. Worried the fires or the Mounties might have taken you.
No other tool review gives you a good laugh and the amount of knowledge like yours do
Ive waited so long for another Boltr
Just so happens I was wearing my Empire of Dirt t-shart on the way to night shift, and up pops a video from Uncle Bumble. Glad to see you back, hope all is well.
Been a while since we had a good BOLTR! Thanks!
I have one of these and use it around the house all the time. Cuts drywall and small wood and metal things quite nicely
All these years of watching and I've never seen you open a box with a cold chisel like a man.
This is the therapy I’ve been needing. Thanks, sir!
I’m a mobile mechanic, and buying this was a god send for cutting hydraulic hose when making hoses on site.
I love your channel and missed your old videos
Thanks for another BOLTR! I fall asleep to these 😁
Glad to see the shop, and you, are all okay after the fires!
I was just hoping for more BOLTR! Nice!
That is one of my favorite tools ive ever purchased! Amazon carries all the replacement wheels you need bc they are semi hard to find at the Homer Depot
It most definitely is a treat especial when you spot a BOLTR
Great to see the hands back on the work bench tearing down stuff.
I’m sure someone has said it but the shroud comes off. Have used one of these for a bit. Not to bad for stupid activities.
Awesome to see it opened. Thanks neighbor.
Omg I've waited zo long for a BOLTR!!
Finally. These are the videos I crave